Question about 2004 Ford Focus

1 Answer

Engine swap Hi, My name is Harry. I posted a problem with a Zetec engine I replaced. I found out that the fly wheel is stuck with the engine when I installed the transmission, I made sure the trans is aligned but when I tighten the bolts on the engine and transmission the flywheel touches the engine block? any sugestions please: I,ve mantle and dismantle three times. your help is appreciated. Thank you Harry

Posted by on

  • 1 more comment 
  • harry correa May 15, 2009

    I used the flywheel that came with the engine from the yunk yard, and I installed the flywheel with the tooth marking toward the engine since there is a sensor on engine side?

  • harry correa May 15, 2009

    I forgot to tell you the car is a automatic transmission.

    Thanks

    Harry

  • ITSCENTER May 11, 2010

    IS THE FLYWHEEL ON BACKWARDS/DID U USE THE FLYWHEEL FROM THE OLD ENGINE?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 453 Answers

Turn it around sounds like its on the wrong way.

Posted on May 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine noise seems to be coming from the transmission. replaced the fly wheel but still have noise


wow, no year, nor engine or transmission option stated,wow.

use a stethoscope, the electronic is 1/10 th the cost
of guessing.
steelman makes them cheap. buy walfart head phones (nice) muffs
for like $5
and hear pins drop.
really.
learn to use a stethoscope.
and post all the complex modes the sound happens
parked?
moving only?
in 2wd, or 4wd or both
turning, braking
in any gear
in neutral?
when? and when not.
a real mech can drive your for 5min an all that is known. fast
here on the web you have to say it.

Jan 19, 2014 | Jeep Grand Cherokee Cars & Trucks

1 Answer

No 2 wheel drive on 2005 4x4 chevy


youre transfer case is stuck in 4wd ther are two control modules on the treansfer case one or both are not working correctly

Dec 17, 2012 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

2002 ford taurus check engine lite code is po460, a mechanic replaced the fuel pump, still didn't pass inspection......please help!


I am going to paste a list of potential causes for a p0460. There is a cure for a dirty reader card and Ford recommends CHEVRON TECHRON fuel system cleaner. Run tank low, put in cleaner, use best gas you can find,avoid your frequent brand.

02-06-2006 06:19 PM #2 TXFO user-offline.png Not Special Enough txfo.gif?dateline=1249691143 Join Date Jul 2002 Location New Braunfels, TX Posts 13,976 icon1.png Re: Fuel level sensor circuit malfunction (P0460)? P0460 - Fuel Level Sensor Circuit Malfunction The PCM monitors the fuel level input (FLI) circuit for electrical failure. The test fails when the signal moves outside the minimum or maximum allowable calibrated parameters for a specified fuel fill percentage in the fuel tank. Empty fuel tank
Fuel pump (FP) module stuck open
Incorrectly installed fuel gauge
Damaged instrument cluster
CASE GND circuit open
FLI shorted to VPWR
Damaged PCM
Overfilled fuel tank
Fuel pump (FP) module stuck closed
Damaged fuel gauge
FLI circuit open
FLI circuit shorted to CASE GND or PWR GND
CSE GND shorted to VPWR
Monitor FLI PID and FLI V PID in key ON engine RUNNING. FLI PID at 25% fill (with non matching fuel gauge) and FLI V PID less than 0.90 volts [for FLI PID at 75% fill (with non matching fuel gauge) and FLI V PID greater than 2.45 volts] indicates a hard fault.

Jul 13, 2011 | Ford Taurus Cars & Trucks

1 Answer

My 1998 Chevy Blazer will not go from 2 wheel Hi to 4 wheel HI but will go from 2 wheel hi to 4 wheel lo, and it will not change to 4 wheel hi on the fly what is wrong?


I am having the same issue, initially the transfer case motor (encoder motor) was bad. I replaced it and now it will only sometimes shift into four wheel hi. I found a great troubleshooting web site and maybe this will help. http://forums.s-series.org/viewtopic.php?t=50947

Dec 30, 2010 | 1998 Chevrolet Blazer

1 Answer

Having trouble finding a replacement engine cause i have heard they were **** engines, i was wondering if it was to complicated to swap with a 2.0 zetec engine?


All of the ZX2's have Zetec engines. The language filter blocked out some of your text so I don't know what kind of engine someone told you it was. As long as you get an engine from another ZX2, it'll be a direct drop-in. The only concern is if the donor had the same transmission as you do. If not, the crank sensor spacer will have to swapped from your old engine.

Dec 23, 2009 | 2001 Ford Escort ZX2

1 Answer

1998 ford escort 1.6 zetec,solenoid stuck when the engine is started,is this the starter motor faulty or is it something else??


Yes it is the starter motor, remove it and check, you probabley will have to replace the starter Bendix.

Jun 25, 2009 | 1998 Ford Escort

1 Answer

Problem when i have to restart my car


hi could be a number of things like your deisel is dropping back. sounds like injectors and even this would not show on computer if they have a back leek.. you can get them tested but it about 20 pound per injector so be aware also if you take them out as a must the must go back in the same pot as they come from or get them recoded wen u put them bk in

Jun 10, 2009 | 2006 Ford Focus

1 Answer

2002 ford focus zx5 engine swap


SOUND LIKE A BAD CONNECTION.RECHECK ALL THE GROUNDS & CHECK THE POWER WIRES TO THE STARTER & AT THE BATTERY.IS STATER WAS BAD THE LIGHTS WOULD NOT GO OFF WHEN U CRANK.GOOD LUCK

May 06, 2009 | 2004 Ford Focus

Not finding what you are looking for?
2004 Ford Focus Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...