Question about 1999 Pontiac Montana

1 Answer

Any suggestions on changing back 3 plugs

Need to change spark plugs on motana

Posted by on

  • BillDee May 25, 2009

    Thanks for your reply BB1BUD but your about 1 week too late. I managed to change plugs by rotating motor forwards, again thanks for your reply.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 462 Answers

THE BEST WAY TO DO IT IS FROM THE UNDERSIDE OF THE VAN. I'M NOT SAYING THIS IS EASY BUT IT CAN BE DONE FASTER THIS WAY IF YOU HAVE A LIFT.

DON'T TRY THIS WHEN THE ENGINE IS HOT.

Posted on May 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine missing wont fire properly, i think its the spark plugs how do i change them ?


CHANGE SPARK PLUGS.YOU NEED SPARK PLUG 3/8 SOCKET.YOU NEED SHORT AND LONG 3/8 EXTENSIONS.YOU NEED SPARK PLUG BOOT PULLER AND A SPARK PLUG GAUGE SET THE SPARK PLUG GAP.NOW CHANGE 1 SPARK PLUG AT A TIME SO YOU MIX THEM UP GET FIRING ORDER MIX UP CAR BACK FIRE WONT CRANK.ALSO CHANGE PLUG WIRES ALSO.

Nov 10, 2010 | 1994 Honda Civic

1 Answer

Need to change back 3 spark plugs on 2001 kia


use a long, spark plug socket,wrench(how can you do a job without the right tools??????like an accountant without a pen......)

Jul 08, 2010 | 2001 Kia Optima

1 Answer

How to change plugs on honda odyssey 2005


you will need
8mm
10mm
5/8 spark plug socket
3/8 ratchet
3/8 extension (it could be 4in and longer)
and spark plugs factory plugs are pregap iridium
spark plug torque is 13.0 lb.ft
coil torque 8.7 lbf.ft
spark plug part # NGK 1zfr5k-11
# DENSO pkj16dr-m11
and spark plug anti seize on spark plug thread
what you need to do is remove the plastic cover 8mm socket or 10mm sockets
now remove the spark plug covers and remove the spark plug coils too 10mm head bolt you will need a 5/8 spark plug socket and a 3/8 ratchet and a 3/8's extension too
you need OEM spark plugs they work the best
hope this will help

May 22, 2010 | 2005 Honda Odyssey

2 Answers

2006 Dodge Caravan 3.8 V-6: check engine light on


The P0456 code has nothing to do with spark plugs. It's an EVAP (emissions) code. Best bet is to read up on the suggested solutions for that exact code: P0456

Feb 10, 2010 | 2006 Dodge Grand Caravan

2 Answers

Remove and replace spark plugs


not to bad you'll need long extension, front one are there in view, the back one's remove spark plug boot (long one) and with extension you can reach spark plug's.

Dec 11, 2009 | 2000 Mazda MPV

1 Answer

2003 ford expedition has service engine light on


It does not take 3 hours to change spark plugs..I will suggest you get the right equipment to do this job.Get the right tool that can sit on the spark plug and unscrew....You will need to disconnect the coil pack that sits on top and disconnect the wires if needed.From there it is self explanatory.

Jun 16, 2009 | 2003 Ford Expedition

2 Answers

Need to change spark plugs...


put the car on rams and go from underneath to those 3 plugs

May 02, 2009 | 2000 Chevrolet Venture

1 Answer

How do I change the center sparkplug on 2001 chevy blazer


The best possible way to replace the center spark plug or number 3 plug is to jack the front end up so the wheel's are off the ground and go through the l/f wheel well splash shield to gain access to plug and wire. You will most definately need a double jointed 5/8 spark plug socket which can be purchased at autozone, pepboy's, etc. for about 8 dollars. To aide in installing it I suggest you use a piece of 3/8th's fuel line to start the spark plug by shoving the end of the plug into the fuel hose and twisting it into the cylinder head. I suggest you turn plug into cylinder head as far as you can go until you can put the socket back on it.

Apr 10, 2009 | 2001 Chevrolet Blazer

Not finding what you are looking for?
1999 Pontiac Montana Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...