Question about 2005 Lexus RX330

1 Answer

Lexus RX330 - "Maintence Required Light" flashes 7 times?

When turning on the ignition on my vehicle my maintence required light flashes 7 times, what does this mean? Is there something I can get that will tell me what the different things mean depending on how many times they flash?

Thanks.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Reset: turn ignition on...push odometer button till it displays mileage on car...not trip milage but actual mileage. Turn car off. Open driver's door, press and hold odometer button....turn ignition to on....hold odometer button for 10 seconds....odometer display will show -----,----,---,--,-,0000000....maintenance lights are reset...lights will come on every 7500 miles to remind you to change oil and check fluids etec....

Posted on Jun 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to reset AIRBAG SRS Light on 2003 - 2006 Infiniti G35 Coupe


Hi, on most vehicles, the airbag light should come on for at 6 seconds, and then go off if the system is working properly. If there is a fault or a problem in the system, the light will remain illuminated, or flash continuously. If the airbag light does not work properly, some vehicles have an audible tone that sounds indicating a problem with the airbag light system. When the light is on (or the tone is sounding), the airbag will NOT deploy, even in an accident. <br /> The flashing light on your car is telling there is a problem. <br /> <br /> <b>How to reset AIRBAG SRS Light on 2003 - 2006 Infiniti G35 Coupe </b> <br /> Ignition Key Method: <br /> <ul> <li>Turn IGNITION on (but don't start car).</li> <li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li> <li>Wait 4 seconds.</li> <li>Turn IGNITION on (but don't start car).</li> <li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li> <li>Wait 4 seconds.</li> <li>Turn IGNITION on (but don't start car).</li> <li>After the AIR BAG warning lamp lights for 7 seconds, turn IGNITION off within 1 second.</li> <li>Wait 4 seconds.</li> <li>Turn IGNITION on (but don't start car).</li> <li>Wait 3 seconds.</li> <li>Turn IGNITION off.</li> <li>Wait 2 seconds.</li> <li>START Car (the light may be blinking slower than before).</li> <li>Wait 3 seconds.</li> <li>Turn IGNITION off.</li> <li>Wait 3 seconds.</li> <li>START Car.</li></ul> <br /> <b>This is a little easier</b> To reset the light simply turn the iginition to the on position, (you dont need to start it). All the lights should stay on for thier diagnostic check. As soon as the airbag light goes off, before it starts flashing, immeditatly turn the car off. Repeat this 3 or 4 times (turning to on then off) and the light should go away

on Dec 07, 2010 | Infiniti G35 Cars & Trucks

1 Answer

The maintence require light is on what is the promblem


the maintence reminder lamp means you are due for oil and filter change.to reset maintence light, turn the ignition switch to the on position engine off.push the reset button on clock control panel for 3 seconds,then turn off ignition switch.then turn back on the ignition switch the maintenance light should be off is so.it has reset.

Apr 15, 2011 | 1996 Acura TL Series

1 Answer

How do I reset the (required Maintence) indicator light after I changed the oil.


With the key in the off position press and hold the trip odometer reset button. turn the key to the run position (do not start the vehicle). Continue to hold the reset button, the maintenance light will flash and turn turn off. Once it has turned off it is reset and you can let go.

Sep 27, 2010 | 2004 Honda Odyssey

1 Answer

The engine light came on recently in my 2007 Jeep Liberty. Everything seems normal, engine sounds good, it is not overheating, etc...could it be something easy to fix?


This may or may not work depending on the feature install in your vehicle.
To find out, put you Jeep in park, turn the ignition off, now with our starting the engine turn the ignition on,off,on,off,on,off,on this must be completed in 10 seconds. If you have a digital odometer the number should change shortly, the first number will be 12, each number will flash 3 times. The last number will be 55 which means "end of codes". If you don't have a digital odometer it will flash the codes on your check engine light.
If this works write the codes down and I can tell you what they mean. If it doesn't work then as far as I know your vehicle requires a code reader in order to read the codes in your Jeeps computer.
If you want you can take your Jeep to Autozone and they will read the codes for you.

Jun 14, 2010 | 2007 Jeep Liberty Sport

4 Answers

My daughter's '97 Honda Accord has a "maintenance required" light on the dash that's in the red. Does this mean there's something serious wrong? Or just scheduled maintenance is overdue? The milage is...


It just means it time to change your oil. If it has been changed recently and you just want to shut your light off just hold down the trip reset button. While holding it down turn the ignition on but do not start the engine. keep holding the button down for approx. 10 secs. the light should start flashing and then go out. then release the trip reset button and turn the ignition off. and the light will be reset.

Feb 25, 2010 | 1997 Honda Accord

1 Answer

Maintence light flashing 7-8 times ? 92k


IT IS A MILEAGE LIGHT WITH THE KEY OFF HOLD THE SELECT RESET BUTTON ON DASH AT THE SAME TIME TURN KEY ON THE LIGHT WILL FLASH ONE TIME KEEP HOLDING THE BUTTON WHEN THE LIGHT GOES OFF TURN KEY OFF THEN START CAR LIGHT SHOULD GO OFF AFTER A COUPLE OF SECONDS AND SHOULD BE RESET

Dec 20, 2009 | 2002 Honda Accord

2 Answers

Immobiliser is not turning off and not allowing the engine to start


is it a stick immobiliser?
If your vehicle does not start and the LED continues to flash while the Ignition is 'ON', this means that the Immobiliser system has not recognised the transponder stick.
Simply turn the Ignition 'OFF' then back 'ON' again. If the Status LED continues to flash, move the transponder stick closer to the key barrel until the LED stops flashing and turns 'OFF'.
If the transponder stick on the key ring does not disarm the immobiliser or the
transponder stick is misplaced, you can override the system by entering a 5-digit override number. Each vehicle has a unique 5-digit override number. This number is recorded on the
customer’s owner’s manual. If the customer loses their owner’s manual / override number, the number can be found by locating the vehicle’s Daewoo Stock Number (D.S.N). The customers override number is the last 5 digits of their D.S.N.
9748811.jpg
Overriding the system using the example 5 digit code 2,1,0,6,2
Important Note: 10 flashes of the Status LED represent the number ‘0’.
1. Remove the Transponder from the Key Ring.
2. With the system armed (LED flashing slowly) Turn the ignition ON/OFF 5 times, with the final position being off.
3. The LED will turn solid red for 2 seconds and then begin to flash.
4. When the LED flashes twice (2), turn the ignition ON. (number 2 was entered)
5. Turn the ignition OFF and wait for the LED to flash once (1) and then turn the ignition ON. (number 1 was entered)
6. Turn the ignition OFF and wait for the LED to flash ten (10) times and then turn the ignition ON. (number 0 was entered)
7. Turn the ignition OFF and wait for the LED to flash six (6) times and then turn the ignition ON. (number 6 was entered)
8. Turn the ignition OFF and wait for the LED to twice (2) and then turn the ignition ON.(number 2 was entered) The LED will turn solid red, which means the system is now overridden and the vehicle can be started. If an incorrect number is entered in, wait 11 flashes then start the procedure again.
NOTE: This is a one-event override. Once the ignition is turned off, the vehicle will passively immobilise after 30 seconds. If your 5 digit override number does not override the system, the chances are that you entered the wrong number. If this is the case, you’ll need to re-enter the override number
and try it again.

Jul 13, 2009 | 1999 Daewoo Lanos

1 Answer

Why does the maintence required light flash 5 times when started?


It will; always do that on some vehicles, as long as it doesnt stay on for an extended period of time, i wouldnt worry about it so much.

May 20, 2009 | 2005 Honda Accord

1 Answer

Blinking maintence light 02 accord


turn the key off, then hold the odometer reset button in, turn key on and keep holding, the light will flash off then on once, keep holding until light stays out, start car and all should be ok

Nov 16, 2008 | 2002 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

1,275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

79186 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

918 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...