Question about 2002 Nissan Sentra

Open Question

1997 suzuki marauder vz 800 several problems

I just had it painted so it had been disassembled a bit
after painting and re-assembling I have:

no power to rear turn signals
no power to headlight
starter switch is not activating the starter
bought a new starter solenoid but still has same problem
try to start it normally and nothing
it will jump at the solenoid
fuses in the fuse box are all good

there is a starter control relay that makes me wonder
and of course the starter switch itself

it all worked well b4 I took it all apart except the headlight had recently lost it's low beam

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: 2005 Nissan Exterra won't start

Run a jumper cable from your positive side of battery. to your starter incomming large post...be careful....It will spark big time.  If the started ingages your selenoid is cooked and needs to be replaced.  Be real careful or you can cause harm to yourself as well as your car 

Posted on Feb 01, 2009

  • 1 Answer

SOURCE: 95 pathfinder only 1 headlight comes on both bulbs good

im a mechanic who owns a1995 pathfinder, had the same problem.your trouble is in your daytime running light module. try giving it a tap, bet they will come back on

Posted on Feb 07, 2009

  • 6982 Answers

SOURCE: 2003 Nissan Sentra won't start

Check a couple of things: 1. check battery voltage at terminals.(part of battery) 2. check battery volts at attachment clamp ends of wires.3. check battery volts using positive terminal and block as test points. 4. same test, only use starter end of (+) lead, instead of battery. These readings should be within .5 volts of one another. If nothing unusual found, make same tests while someone turns and holds key in start position (when in "no start" condition) If test 1. shows large voltage drop (below 10.5V), it's likely you have a bad starter. If voltage drops suddenly and reads far below 10.5, check connections. When running, voltage should read about 13.5. Whle running, turn on accessories. if volts slowly drop off and go below 12.5 you have a bad alternator or slipping drive belt.(will usually get noisy) One thing: Interstate makes a very good battery but, do not ignore the fact that even so, it can be defective. Have it load tested to make sure it has good internal (cell to cell) connections.
To me, what you have posted sounds like a connection "breakdown" somewhere (this happens when system is loaded. but follow what I've said and you will get a better picture of what's going on!
good luck

Posted on Feb 20, 2009

  • 22 Answers

SOURCE: LOW BEAM HEADLIGHTS NOT WORKING

Possibly headlight switch

Posted on Apr 27, 2009

  • 33 Answers

SOURCE: Passengers side low beam light don't work

I would say the headlight it self needs replacing

Posted on Jun 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, have a 62 Buick skylark 2 door convertable with a paint code no# FB 4509 and unde NN1 paint company in australia cannot match this code to get me the paint required.Can you help with this please.


Hello there Annie,

Well I think I know WHY nobody can match the paint. The code you have presented is the body assembly number. The 'FB' refers to the body being build in Flint Michigan, then I believe the numbers afterwards are the assembly number.

Regardless of all that, there should be a body plate about the size of a credit card (I take it this is where you came up with the number to begin with).

Just below where it says 'Body' it should say 'Paint'. Just to the right of that is the actual paint code.
BUICK Body Plate Identification

AND, here's the paint codes for 1962;
1962 Color Codes Buick Paint Cross Reference

Hope this helps.

Jan 18, 2017 | Buick Cars & Trucks

1 Answer

Has suzuki marine improved there paint


you are in cars and trucks with boat question, failure....
what paint we cant guess the object you are alluding to.
but Ill answer.
all paint does that, now and forever.
the sun always wins. always.
no paint on earth lasts forever,
why not go to any paint shop for RV and ask them.
or any pro vehicle paint shop.
hopefully they will not giggle most will put their SALES hat
and go, gee ours dont fade?(lies)
then sell you a paint job.

marine what, jet ski, must we guess, or outboard motor casings
or hulls?? what?

keep the vehicle garaged, paint last near forerver
or buy a tarp.
but outside, under MR. SOL, its doomed.

Nov 01, 2016 | Suzuki Cars & Trucks

1 Answer

The paint is just falling off my 2007 Suzuki xl7 when I just rinse it the paint just comes right off like wiping a window what would cause this ?


we dont know, we are blind here, totally
why as the blind?
ask your paint shop why in town, dont call , take it there and ask people that can see.

Mar 14, 2016 | Suzuki Cars & Trucks

1 Answer

Where do i find the id tags


You are here: PaintScratch Touch Up Paint >> Car Paint >> Volkswagen Paint
Find your Volkswagen paint color by clicking your vehicle's year:

Find your Volkswagen paint color by clicking your vehicle's model: Order Volkswagen paint by clicking the year or model.orange-arrow-right.gif

We sell Volkswagen touch up paint pens, Volkswagen spray paint and other Volkswagen touch up paint products.
Find Your Volkswagen Color and Volkswagen Paint Code Volkswagen codes can be difficult to find. Most Volkswagen ID codes are going to be somewhere around the spare tire area. They are printed on a paper color id tag which is guaranteed to fall off and disappear just when you need to find it.

Jul 30, 2012 | 1997 Volkswagen Golf

1 Answer

Replacing rear brake light bulb


Carefully remove the two trim plugs from each tail light assembly with a small knife blade. Remove the two hex head bolts on each assembly. Insert a small paint stir stick (soft wood won't damage paint) between the fender and the tail light assembly. Gently pull the opposite (inside) side of the assembly off. The paint stick allow the assembly to pop off the ball and socket pin holding the outside part of the assembly in place. Unplug the power plug by releasing the retainer clip. Unscrew the large black plastic nuts on the back of the assembly with a very large screwdriver, if they can't be turned by hand,and remove. Replace burned out bulb/s and reassemble in reverse order. Remember the trim plugs have two prongs on them. Position them with the prongs and the direct top and bottom and press into place.

Apr 09, 2011 | 2004 Porsche Cayenne

1 Answer

How to re-paint scaped and scuffed car bumpers and fenders


In my experience, it's good to get paint that is matched to the original manufacturer's color from a place like NAPA auto parts.

Ask about the 'flex' agent as well, as many bumpers are made of plastic which will need it for a satisfactory result.

Then, get an air brush or detail paint gun and an air compressor (small) that can power it.

Sand the affected area with coarse down to fine sandpaper until relatively smooth.

Spray grey or red primer on the masked off area.

Fill the canister with paint and spray the scuffed and scraped bumpers or fenders.

You can paint small areas outside or in a large dust free garage, or preferably in a paint booth that has down draft ventilation.

Wear proper apparel for painting when you do this.

New paint can fill many cracks on several coats.

Oct 07, 2010 | 2004 Toyota RAV4

1 Answer

1997 grand voyager paint codes location


There is a manufacturer's 'body code plate' located on the radiator closure panel crossmember in the engine compartment. There are 3 lines of code #'s and letters, the MIDDLE line is paint info. !st 3 digits are 'paint procedure', then 4 digits for 'primary paint' then 4 digits for 'secondary paint', then 'trim' and finally 'engine', all on the middle line. Hope this helps (I've got a '98)

May 04, 2009 | 2002 Chrysler Voyager

2 Answers

Peeling paint


This is not an uncommon problem with vehicles that are left outside most of the time. There are three Dodge trucks in my neighborhood with this same problem, Solution - a new paint job.

Sep 06, 2008 | 1996 Dodge Ram

Not finding what you are looking for?
2002 Nissan Sentra Logo

Related Topics:

655 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...