Question about 2000 GMC Jimmy

1 Answer

The rear went out in my SUV and I need to know the gear ratio. I have another rear but need to know if it will work.

The rear went out in my 2000 GMC Jimmy. I need to know the gear ratio. I have a rear from a 2000 Chevy Blazer and I want to see if the parts are interchangeable. Thanks

Posted by on

  • fallnights20 May 15, 2009

    Do you know by chance if the Blazer rear would work?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

Hold one wheel. mark the other wheel. Turn the unlocked wheel two complete revolutions. Count the number of turns the yoke make in two revolutions of the unlocked wheel. 3 1/2 turns= 3.42 3 3/4 turns 3.73 and so on

Posted on May 15, 2009

  • Clint Smock
    Clint Smock May 15, 2009

    Yes it will. But try to get the same ratio



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Will a 96 and a 97 gmc rear axles interchange and how do I find the gear ratio

If the axles are from the same size vehicles the answer is PROBABLY yes.
Differential ratio can be calculated by counting the number of teeth on the crown gear and on the pinion gear. Divide the big number by the small number, that's your ratio (to 1)

Aug 02, 2015 | GMC Cars & Trucks

4 Answers

Which other vehicles use the same rear end as 1996 Chevy Blazer 4 by 4 with 7.5 in ring gear

The chevy s-10 pick up, GMC Jimmy, chevy Astor van would have a rear end that would line up and fit.

Apr 14, 2015 | 1996 Chevrolet Blazer

1 Answer

2000 gmc jimmy 4X4 how do i know what size rear axel do i need there is like 6 different ones

If you are talking about gear ratio, there is probably a tag on one of the bolts that holds the inspection plate to the housing. It should tell you the gear ratio and ring gear size. If its not there you can pull that plate off (be sure to have an oil catch pan under it) and look at the ring gear itself. All of that same information will be stamped on the ring gear, on the surface of the gear facing you. You may need to rotate it so you can see the stamp.

Aug 31, 2014 | Cars & Trucks

1 Answer

Gear ratio rearend

The pining noise you are hearing is detonation in the engine and comes from incorrect air/fuel ratio making the engine run too lean, It is spontaneous combustion occurring before spark and tends to drive the piston back down the bore. It is detrimental to the engine and should be rectified asap. Run fault codes and look for sensor problems. Vin numbers are unlikely to show the gear ratio of the rear end as there are 4 ratios for each model of car. Jack up on side of the rear . count the number of turns the pinion does for each revolution of the wheel . Divide that by 2 ( side gears in diff carrier multiply by 2 when driving one wheel)and you will get the ratio. So 10 revolutions of the tire gives 35.5. revolutions at the pinion equals to 17.5 or a ratio of 1.75: 1 ratio

Oct 06, 2013 | GMC Cars & Trucks

1 Answer

Had one 1993 jimmy, bearing ate into shaft. have a parts jimmy bought same model, color, everthing seems the same. when i went to change the differential the two were different. as long as i take out the...

I see a red flag here. If they don't look the same, they may have different gear ratios. This is critical in a 4 wheel drive. Front and rear gears have to match

Mar 19, 2011 | 1993 GMC Jimmy

1 Answer

Need to find gear ratio on 2000 chevy blazer

If you want to find the ratio then you can remove the rear differential cover and spin the wheels by hand to turn the gears and find the number on the carrier gear. The numbers will be what you need to tell what the ratio is.

Nov 05, 2010 | 2000 Chevrolet Blazer

1 Answer

Need to know what the gear ratio for the rear axel for a 2000 Jeep Lerado

the gear ratio on this suv is usually in the manual or onthe stick on the door frame

Sep 15, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Need to know what model will fit a 1997 rear end because make noise and they say i need anew one

96 to 2001 should fit but you have to find the gear ratio, if you look on the glove box door when you flip it down there will be a bunch of codes. the gear ratio code will be GU6 or something like that. Definitely start with a "G".

Feb 07, 2010 | 1997 GMC Jimmy

2 Answers

Want to change gears in rear end for posi traction in a 98 gmc25000 is this possible?

It is possible, you just have to know what gear ratio you have in your Sierra. I had issues with my son's rear differential and did the Salvage Yard and picked one up for $250.00 with less then 45,000 miles. Remember new cars end up at Salvage Yards also.

Here are the Pro code for the rear ends to your Sierra and you can match one up at a Salvage Yard.


Open Your glove box and look inside it. Should be a list of codes on the bottom.
Example: GU6 G80 According to that, you'll have a 3.42 posi

Good luck and keep me posted and call around Salvage Yards, there prices will differ from one to the next salvage yard and don't ask them for a posi rear end. The cost will you more, just search all the SUV's and look at the pro codes in the glove box. Hunt, most awd system SUV will have the G80 rear end.

Good luck and keep me posted.

Jan 10, 2010 | 1993 GMC Sierra K1500

Not finding what you are looking for?
2000 GMC Jimmy Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

76164 Answers


Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides