Question about 2001 Hyundai XG300

1 Answer

Speed Sensor Failed

My Speed sensor is bad. I would like to save some money and change it myself if possible. Where is the speed sensor located? And is it accessible?

Posted by on

  • keithnjenn May 15, 2009

    I took the car in and had the check engine light checked at Auto Zone and they check the code (P 070???) and it came up as the speed sensor.

  • yadayada
    yadayada May 11, 2010

    give the trouble code 1st before u throw good money away on a part u may not need.


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

I had the same problem, I first replace the output speed sensor, no fix, then the input sensor. Both located under air filter box. Easier to get to all the screws if you remove the battery. Input sensor is facing forward towards the frond end. The output sensor is under the cables linkage, which is directly under the air box facing the firewall.

Think the code was 0715

Posted on May 20, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where does the turbine input shaft speed sensor go on a 2010 cevy malibu Lt

Chances are that this sensor is located in the transmission or has access to it outside the housing.Take the car to a transmission specialist and have them give you an estimate.Most dealerships these days don't even do trany work anymore so save yourself some money and go directly to someone who can help you.good luck

May 22, 2014 | 2010 Chevrolet Malibu

1 Answer

Would bad speed sensor on my 2000 saturn make my tranny shift hard

It is a distinct possibility that it will be as you say. It is a sensor that communicates the speed to the TCM and ECM to change at the right road speed /engine rpm.

Apr 05, 2014 | Cars & Trucks

1 Answer

Where is the vehicle speed sensor located?

It is located on the outside of the transmission housing under the hood, it goes where a speedometer cable used to hook up on the earlier models Below is a picture of the sensor.

Jan 26, 2012 | 1998 Ford Escort

1 Answer

My check engine light is on- the reported error is p501 right wheel sensor failed smog- what part or parts do I need to correct this problem-where is the part located and guesstamate what the part might...


May 12, 2011 | 2002 Kia Rio

2 Answers

Van will not start code p0725 what to do

Without knowing make or model Po725 is a Chrysler code for Engine Speed Sensor Circuit
Possible Causes- - Open or shorted CKP sensor circuit condition
- Poor CKP sensor electrical connection
- Check communication error between the ECM and TCM
- Failed CKP Sensor
When is the code detected- The P0725 Codes is triggered when TCM does not receive the engine speed signal from ECM. Chrysler description- The Engine Control Module (ECM) monitors the engine speed through the Crankshaft Position (CKP) sensor with the engine running, and send signal to the Transmission Control Module (TCM

May 09, 2011 | Chrysler Town & Country Cars & Trucks

1 Answer

ABS light has come on and speedometer not

It probably only needs a new VSS (vehicle speed sensor). Since the ABS uses the wheel speed and vehicle speed to determine ABS operaton, is makes sense that the ABS light is on if the VSS failed. The computer also uses the VSS to operate your speedometer.

The speed sensor will be about $40-70 for a manual transmission and about $70 for the automatic transmission. You'll find the speed sensor in the transmission near the CV axles. It is likely you'll be able to reach it yourself and that'll save you money and a trip to the shop.

Mar 04, 2010 | 2001 Ford Focus

1 Answer

My code reader tells me that the front wheel speed sensor is bad on my 05 chevy uplander. How hard is it to replace that can I do it myself or do i need to take it to the shop for that?

The OBDII reader doesn't necessarily indicate if the sensor is bad. It simply indicates that there is a malfunction somewhere with that particular sensor circuit. It is possible (especially in winter road salt areas) the sensor is good but its wiring connector is dirty or corroded, needing cleaning/exercising with a spray cleaner. Don't spend money on a sensor unless it's actually bad.

Nov 07, 2009 | 2005 Chevrolet Uplander

2 Answers

93 plymouth voyager transmission

Which sensor? The solenoid pack is located on the front, under a black rubber cover, right under where the cooler lines go it. But this is only on the 4 speed Trans. If you have a three speed trans, there is no solenoid pack on the outside. Also the 3 speed does not have an input shaft or output shaft speed sensor, only a vehicle speed sensor.

Mar 09, 2009 | 1993 Plymouth Voyager

1 Answer

2001 xterra vehcile speed sensor problem;f=2;t=001342

Jan 02, 2009 | 2001 Nissan Xterra

Not finding what you are looking for?
2001 Hyundai XG300 Logo

666 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides