Question about Chevrolet Chevy

2 Answers

Rear windshield washer, no liquid coming out @

2005 model 4 door chevy optra station wagon, Rear windshield washer, no liquid coming out @ rear, washer container filled up to full, motor washer ok for front & rear. E.R.

Posted by on

  • HalfmoonUSA May 11, 2010

    Many vans/station wagons have a second reservoir for washer fluid on the side next to the hatch/door/tailgate. Check the owners manual under "washer reservoir, refilling".

    What are you trying to say after the word front "motor washer ok for front & rear. E.R."?


×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just found this problem on My Car. It was a broken washer fluid hose in the top left corner of the rear hatch door. removing the interior panel (they just pop off) Will gain access.I replaced the clear factory hose with a rubber more flexable one.

Posted on Dec 20, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 1,348 Answers

Check that the jet is not clogged.take a very thin piece of wire,like from a twist tie and clean the hole. maybe the hose is pinched or disconnected.if you spray the rear,you should hear the pump working.i have seen hoses come off and if you spray for 20 seconds,it may leak from the car

Posted on May 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevy optra 2005 Front wiper stop working, rear wiper and washer spray still work------any fixes


Check the fuse for the front wipers. Only other idea is that the front motor has died.

Sep 07, 2014 | Cars & Trucks

2 Answers

Where is the rear windshield fluid reservoir located on a 1994 Toyota Camry Station Wagon?


not 100% on this, but typically, you have to open the back hatch, and there will be a small rubber cap over the opening for the washer fluid located on or near the top of one of the taillight lenses on either side of the vehicle.

Apr 23, 2017 | Toyota RAV4 Cars & Trucks

1 Answer

Where is the windshield washer motor located? Is it near the heater motor? I had mine fixed and now the heat comes out of the dash for the defroster


Windshield Washer Pump Removal & Installation To Remove:
  1. Remove the air cleaner assembly.
  2. Remove the bolts. windwash.gif

  3. Position the pump and reservoir aside.
  4. Disconnect the electrical connectors.
  5. Disconnect the washer hose.
  6. Remove the pump and reservoir.
  7. Remove the washer pump.
washpump.gif

WARNING
Windshield washer solution contains methanol which is poisonous. Observe all cautions and warnings indicated on label of washer solution container.
NOTE: Windshield washer fluid should be collected in a container after the windshield washer hose is disconnected.
To Install:
WARNING
Windshield washer solution contains methanol which is poisonous. Observe all cautions and warnings indicated on label of washer solution container.
  1. Install washer pump in reservoir.
  2. Install washer pump reservoir assembly.
  3. Connect washer hose.
  4. Connect washer electrical connector.
  5. Install air cleaner assembly.
---
The windshield wiper fluid pump is located in the tank which is not in the heater motor or defroster area in the dash.

The defroster/heat control door is located in the dash board area:

Air Door Actuators, Cables or Motors Removal & Installation Air Inlet Door Vacuum Control Motor To Remove:
  1. Remove the instrument panel lower insulator cover.
  2. Disconnect the vacuum connector.
  3. Remove the control arm clip and the spring.
  4. Remove the nuts and the air inlet door vacuum control motor.
Air inlet door vacuum motor mounting screws for-10-00-245.gif

To Install:
  1. Install the vacuum motor on the mounting bracket.
  2. Connect the control arm and spring.
  3. Connect the vacuum hose to the vacuum motor.
  4. Install the lower instrument panel lower cover.
Floor Defrost Door Vacuum Control Motor To Remove:
  1. Disconnect the negative battery cable.
  2. Remove the left lower dash insulator panel and disconnect the lamp.
  3. Remove the two pin-type retainers and remove the fill panel.
  4. Remove the DLC mounting screws.
  5. Detach the vacuum line.
  6. Remove the lighting module.
  7. Remove the screws and the bracket.
  8. Remove the floor/defrost door vacuum control motor.
Floor/Defrost vacuum motor mounting screws for-10-00-246.gif

To Install:
  1. Connect the vacuum lines and install the floor/defrost vacuum motor.
  2. Install the bracket and lighting control module.
  3. Install the DLC bracket and mounting screws.
  4. Install the fill panel.
  5. Install the left lower dash insulator panel.
  6. Connect the negative battery cable.
Panel Door Vacuum Control Motor To Remove:
  1. Remove the instrument panel.
  2. Reach through the door opening and remove the pin.
  3. Disconnect the panel door vacuum control motor vacuum line.
  4. Remove the screws and remove the panel door vacuum control motor.
To Install:
  1. Install the panel door vacuum motor.
  2. Connect the vacuum line to the panel door motor.
  3. Reach through the opening and install the pin to the linkage.
  4. Install the instrument panel.
prev.gif next.gif

Jan 19, 2011 | 2003 Mercury Grand Marquis

1 Answer

Where does the windshield washer go?


The washer fluid is in the same container as the front washer, under the hood.

Is there a problem with the wiper operation in the rear washer/wiper?

Jan 04, 2010 | Chevrolet HHR Cars & Trucks

1 Answer

2005 grand caravan rear windshield washer problem


check you rear wiper motor and make sure there fluid going to the motor

Jul 01, 2009 | 2005 Dodge Grand Caravan

1 Answer

Rear windshield washer motor works, but no fluid comes out


Rear washer may have it's own reservoir . Can you hear a pump humming when you activate the washer? Look in the under flooor compartment

Mar 22, 2009 | 1997 Chevrolet Suburban

2 Answers

Hi can you tell me where to find the rear windshield washer container to fill on a 99 gmc jimmy


I'm pretty sure it's the same as the front washer, You can check by see ing if there are two pumps in the front washer resevoir, if not there is a possiblity that there is a bottle in the back, servicable by opening the rear door and looking at the walls behind the tires. I hope this helps

Jan 18, 2009 | GMC Jimmy Cars & Trucks

3 Answers

Refill back windscreen wiper with water


i didn't know there was a seperate one i have same car and mine u just fill in the front under hood and hose goes to back and it's fine.

May 24, 2008 | 1995 Subaru Legacy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

550 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...