Question about 2003 Hyundai Santa Fe

1 Answer

17in alloys wheels makes strange sound

Hi ive got new 17in alloys wheels for my honda civic 98hb and ive fit into my car. the problem is alloys wheels makes strange sound, its like some turbo noise but i dont know. when i speed more the sound makes more noise also when i move my leg from GAS padol its makes more noise . i went to local garage but they dont know anything about the. the alloys wheel neither touching anything like arches or suspension. i dont know why the alloys wheel makes sound? my old 15in alloys wheel didnt make any sound. so i dont know... plz help me ...thnakx

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 54 Answers

What design are they, two thing could be doing it, if the obviouse touching has already been investigated, one is the design, if the spokes/hub sits out further than the rim than the outer of the rim they could be catching the wind and making some freaky noises, or if the center dishes in then maybe they are "loud" tyres by that i mean do the tyres have wide grooves, directional etc, high performance tyres are in principle very noisy. hope this has been handy.

Posted on May 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I want to buy rims for my 2005 Honda Civic ES5. What is the offset for this car?


Hi, I know you problem would have been solved but I am also having the same question. The only difference is my car is 2006 Honda Civi. what size should I prefer?

Jan 18, 2011 | Honda Civic Cars & Trucks

1 Answer

Honda Civic 2007 Civic . Cahange wheel bearing and


sorry to tell you this but it sounds like the wheel bearing was put in backwards on one or both sides. the front wheel bearings have a black speed ring built in and that is what your speed sensor reads off. - this is common as the front bearings will install either way- hope this helps

Dec 12, 2009 | 2007 Honda Civic GX NGV Sedan

2 Answers

Can alloy wheels be noisy?


yes they can be a bit noisy depends on teh tread pattern

Nov 07, 2009 | 2005 Toyota Matrix

1 Answer

Change front wheel studs on a 2003 Honda Civic.


The lugs must be pounded out with a heavy mallet, the new ones can be put back in as much as possible, make sure they are straight, and then use your lug wrench to tighten on the lug nut and keep turning until the lug is fully seated.

Mar 15, 2009 | 2003 Honda Civic

1 Answer

1997 honda civic 5 door


Sounds like its not cable, but in the hand brake itself. if the release is broke, pulling up on the cable is not going to hold the car and will give way. really sounds like the locking mechanism on the hand brake is broke.

Feb 17, 2009 | 1997 Honda Civic

2 Answers

Just a question


The swap is easy but too much to post here. I will fit into any civic 89-00 with the right aftermarket mounts from hasport or just go to ebay. The engine harness can be purchased at a local juck yard if you don't have a harness with 4 injectors. I you have only two injectors then the harness will need to be modified with vtec wiring and ad the other 2 injectors. Any 90-93 integra axles will fit as long as you use the halfshft. Must be manual. and use a modified shif linkage from ebay. Youmust take off the caps behind the civics hubs. Use a PWO or PR3 ECU. Good luck.

Jan 28, 2009 | 1989 Honda Civic

2 Answers

2005 Honda Civic wont start. Just makes a clicking sound


This sounds like a starter problem, does it click when you hit the key? are the battery cables ok, not corroded?

Nov 06, 2008 | 2005 Honda Civic

1 Answer

HONDA ACCORD 2003 / STRANGE SOUND ON AIR ACCOND


BETTER CHANGE THE BREAK DRUM BECAUSE IT MAY BE BENDED

Jul 09, 2008 | 2003 Honda Accord

1 Answer

ALLOY WHEEL UNLOCKING NUT FOR CIVIC GLACIER


You can get a wheel lock removal socket at NAPA or other part stores. This tool grabs ahold of the lug nut and removes them.

Jun 20, 2008 | 1995 Honda Civic

Not finding what you are looking for?
2003 Hyundai Santa Fe Logo

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...