Question about 2001 GMC Yukon

1 Answer

A/C BELT KEEPS BREAKING WHEN I PRESS THE GAS, I HEAR A RATTLING NOISE. I '[VE CHANGED THE COMPRESSOR AND DYER, AND IT'S STILL DOING IT

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 957 Answers

The A/C belt just goes from the crank to the compressor. So if your snapping them then either there is a sharp edge on one of the pulleys or your compressor is seizing up.

Posted on May 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Rattling noise after belt replaced


go to www.automecanico. +www.autoelectronico.com
translate the web and get the topic(s).
God bless you

Jul 27, 2013 | 1993 Ford Taurus

1 Answer

Rattling noise under car


Try premium gas,your valves are rattling,sign of low octane starvation.

Jul 20, 2013 | 2006 Nissan Murano

1 Answer

When i turn on the windsheald defroster i hear a rattle in the engine


The ac compressor runs in defrost mode.
So the noise could be a belt tensioner or something involving the ac compressor pulley.

Feb 18, 2013 | 2001 Ford Escape

2 Answers

I hear loud noise when I turn on air conditioner in my 2001 Chevy Suburban, it only makes noise when I accellerate or push gas in park. No noise when I am idled. But air blows cold still.


Check for wear or other faults all of the following: The belt, fan clutch, Check A/C compressor&clutch for damage. Check A/C compressor for damaged or faulty temperature switch switching compressor off and on too rapidly, or low oil level.Check A/C hoses for metal A/C Lines vibrating against other components under the hood, or faulty blower motor bushings. Hope this helps you out.

Aug 24, 2011 | 2001 Chevrolet Suburban

1 Answer

When i press the gas pedal i can hear a rattling sound


Hi, there a couple of things that can cause this rattling type noise on acceleration the most common was the serpentine drive belt tensioner there was a service bulletin to address this. That bulletin number is EG021-07. The other problem is with the heat shields on the exhaust have a tendency to rattle also. I would have your local mechanic inspect both of these issues have them pull the service bulletin to verify whether not yours has been replaced or is making noise.

May 30, 2011 | 2002 Toyota RAV4

2 Answers

I have a 2005 Ford Explorer and I am experiencing a rattling noise in the front of my engine when I accelerate. Any idea what could cause this?


There are a few things i would look at, the common problems are the exhaust system may have a rattle clamp or the rings on the exhaust flex pipe, the next is the fan belt area, the ac compressor or a pulley may be worn and loose i would start with these things first, good luck.

Oct 27, 2010 | 2005 Ford Explorer

2 Answers

My 2005 Crysler Town and Country has a rattle noise coming from the serpentine belt area(maybe alternator) when the A/C is on and I'm in gear, but not moving. A/C compressor has been replaced with new...


just fixed rattling problem on my 2005 grand caravan 3.8 replaced alternator pulley has a clutch effect when i twist it back and fourth by hand could hear rattling and squeaks replaced alternator and pulley and rattling is gone

Oct 11, 2010 | 2005 Chrysler Town & Country

1 Answer

Sounds like a bearing going bad where do i look first


a rod bearing makes noise when you are just barely pulling .. it likely will quiet down as you accelerate and decellerate .. you can rev the engine up a bit then let up on the gas just enough to keep that rpm ..a rod bearing will rattle a lot then ... if a thud like noise happens when you are accelerating . then it could be a main bearing .. if the noise is there all the time and sounds like a rattle then its more likely a valve problem .. old oil can cause the lifters to stick and rattle continuously .. if the noise you hear is a squeal then you could have a bad bearing in the idler pully (for fan belt) or alternator .. if thats the case you can put a drop of oil on the bearings one at a time until the squeal goes away .. that will identify which part is going bad .. there are other less likely bearings that can go bad .. like the cam, distributer, air compressor and water pump .. each have their own type noise ..

Oct 23, 2009 | 2003 Chevrolet Monte Carlo

2 Answers

Same rattle and noise


this is easy one if you put the a/c on do you hear the rattle if yes then shut off the a/c if the noise go away then it is the compressor

Jul 21, 2009 | 1995 Nissan Altima

Not finding what you are looking for?
2001 GMC Yukon Logo

Related Topics:

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...