Question about 2003 Dodge Caravan

1 Answer

Need spet by step instruction to replace value cover gasket on a 2001 grand caravan photos if possible. not to familar with all parts,but would like to save the money on repair.this cover is the one close to firewall. thanks for your help, A person if need.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 106 Answers

The valve cover is best accessed by removing the wiper plenum above the engine. It is held in place by the 13mm fasteners inside the plenum. It is not difficult to remove. 1. Remove wiper arm nuts and wiper arms. 2. Remove torx and philips for upper screen and remove screen remembering the washer hose. 3. Dissconnect the wiper module plug located at left side (front of driver) above the master cylinder. Press red lock in to release plug. 4. Remove 5 or 6 13 mm bolts from inside the plenum and lift out the plenum assembly. Now look at the valve cover, in plain view, nice! I can't post images on this forum, no html. If you can PM me I will email some to you.

Posted on Jun 05, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I change the lifters on my 2001 mercury grand marquis. Step by step, please need help

Step by step is too much typing here. Auto parts stores have manuals specific to your car. It will also have the torque values for all the bolts necessary to complete the job.

May 27, 2015 | 2001 Mercury Grand Marquis

1 Answer

Whats the procedure to replacing valve cover gaskets on a 2001 suzuki grand vitara 2.5liter engine?

the steps you want all steps
why not just read the book your self for 4bucks.

posted 100s of times.

its all there in the book and 4bucks aint squat.

Mar 11, 2015 | 2001 Suzuki Grand Vitara

1 Answer

How do u take off valve cover 2000 pontiac

as much as i would like to help on this one i have never did this to a grand am never
messed with one i never cared for those cars but i did look up how to do it for you and found step by step instructions for you here
sorry i cant be of any more help

Dec 29, 2011 | 2001 Pontiac Grand Am SE

1 Answer

How to replace timing cover gasket on 2000 DODGE grand caravan 3.3 liter 2wd

Get a haynes, or chilton manual or try youtube. Too long to write out here.
This isn't a solution but a suggestion.

Dec 04, 2011 | 2000 Dodge Grand Caravan

1 Answer

2001 Doge Grand Caravan has had the radiator replaced. It is blowing a lot of white smoke out of the tail pipe. It is not leaking water.

your coolant is getting into the combustion chamber and then being pumped out the exhaust. you need to get the fault corrected, bad gasket or crack.

Feb 15, 2011 | 2001 Dodge Grand Caravan

2 Answers

Need instructions to replace intake gasket on 99 Pontiac Grand Am

upper or lower e-mail me at bigwheels4now@yahoo .com

Feb 04, 2010 | 1998 Pontiac Grand Prix

1 Answer

I have to change the intake gasket on my 2002 dodge grand caravan 6 cyl. 3.3 ltr. ----i was wondering if there are any instructions I can reference for the job. I have never changed this type of gasket and...

I would highly suggest going to an auto parts store and getting a Chiltons or a Clymer repair manual specific to your vehicle. It will have step by step instructions including photo references that would help out a lot. I have used them in the past to change the intake gasket on one of my vehicles. Might cost $30 but that would only be about 1/3 hour in auto shop repair rates and then you have it for reference for other jobs.

Good Luck.

Oct 10, 2009 | 2002 Dodge Grand Caravan

1 Answer

Valve cover leak oil

My suggestion would be to spend about $20 on a Haynes or Chilton manual and they will walk you through it. Most part stores have them.

Jul 25, 2009 | 2000 Jeep Grand Cherokee

1 Answer

How do i replace value cover gaskets on a 2001 cadillac deville

If you have your intake manifold over your valve covers you need to remove them. once they are off carefully disconnect as many hoses from the covers as you can and try to mark them so you can remember where they go. next you take your ratchet and remove all of the bolts from the valve cover. Take it off and get as much crud off of the surfaces that the gaskets seat onto as you can. next you take a tube of BLUE RTV and apply a thin bead to all of the surfaces that the gasket will seat into. Put gasket onto it's place on engine block, then affix the valve covers on top of that. Replace bolts and intake manifold if applicable and you are done. Note; follow instructions on the RTV tube or you will develop leaks all over the place.

Mar 11, 2009 | 2001 Cadillac DeVille

Not finding what you are looking for?
Cars & Trucks Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides