Question about 1989 Chevrolet Silverado 2500

1 Answer

Where is the turn signal flasher in a 1989 suburban located

Where is the turn signal flasher in a 1989 chevy suburban located

Posted by on

  • 1 more comment 
  • largent007 May 15, 2009

    Both of them dont work

  • Richard Scordino May 11, 2010

    Ok they are round, silver, yellow or blue and about the size of a quarter and about 1" high.

  • Richard Scordino May 11, 2010

    Usually it is located on the fuse panel under the dash on the drivers side. If not look under the dash on both sides next to the steering column. There are two flasher units...one is for the hazzard lights. you can identify it by turning them on the one thats clicking is the hazzard , the other one is for signals.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 68 Answers

It should be in your fuse box

Posted on May 22, 2009

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1596 Answers

SOURCE: 1988 corsica turn signal flasher unit

Look under Driverside Dash under Steering wheet find the Plug for Scanner then go straight UP from there It Should Be Cliped to A Bracket DIRECTLY ABOVE THE DIAGNOSTIC LINK PLUG Its Ther Just Hunt for it sometimes People change them and DONT Put EM BACK

Posted on Jan 30, 2009

  • 532 Answers

SOURCE: where is fuel pump relay on 1989 chevy suburban 1500

passengers side firewall behind plastic cover thats about 12 inches long with a bump in the middle,where the battery cables hook together ,there should be 2 relays there and i think its the one closest to the drivers side

Posted on May 08, 2009

c17hydro
  • 2984 Answers

SOURCE: Where does the flasher go on a 98 chevy malibu

Replacement The turn and hazard flashers are integrated into one flasher on these models. The flasher is located in the hazard warning switch and the hazard warning switch is located on the trim plate. Replace the flasher by unplugging the old one, removing it from the panel, and plugging in the new one.

  1. Remove the bezel from the ignition switch.
7f58edd.gif
Remove the bezel from the ignition switch

Carefully remove the instrument panel accessory trim plate.

9f5c3cc.gif
To remove the trim plate, use a suitable prytool to carefully apply pressure at the retaining clip points . . .

bd28884.gif
. . . then gently pull the accessory trim plate away

Detach the electrical connector from the hazard warning switch.

daa6205.gif
Unplug the electrical connector from the hazard warning switch . . .

Unfasten the screw securing the hazard warning switch and remove the switch.

c506713.gif
. . . then unfasten the screw securing the hazard warning switch and remove the switch from the vehicle


Installation is the reverse of removal.

Posted on Dec 01, 2009

Testimonial: "just what I needed, thank you so much."

  • 1 Answer

SOURCE: where is turn signal flasher 93 cadillac sedan deville located?

On the 1993 Sedan de Ville, The hazard flasher is easy to locate, under the dash between the steering column and the radio. Looking up, you will see the smooth round side of the flasher and the wires will be attached to the top.

The turn signal flasher is more difficult to get to, but readily accessed with a T-15 torx driver and a little patience. It is located to the left of the steering column, but is most easily accessed through the dash panel instead of from underneath.

1. remove the T-15 screw from above the headlight switch, above the fuel data center, and above the small panel similar to the one around headlight switch. All of these are somewhat hidden, and you'll need to feel for them or get low and look up at them.

2. Using a bent piece of wire or an allen wrench, or anything else handy, pull off the small trim piece that is directly below the steering column. On my car, this is wood-grained plastic. This will expose two more screws that need to be removed.

3. Now, you should be able to remove the large dash trim panel that goes around the fuel data center.

4. Unscrew the two T-15 screws that hold the fuel data center into the dash, and it should pull straight forward. There should be plenty of wire to move it out of the way.

5. The turn signal flasher is the silver can that you see to the right in the opening you just created by removing the fuel data center module. It has a single plug with two conductors on the back. I had to use a small screwdriver to pry it off.

It is a different part number, so I don't know if you can just swap it for the hazard flasher to test it like you can on many cars. I just replaced mine with a Wagner 323, which is what came out of mine.

Posted on Apr 30, 2010

flbergeron68
  • 541 Answers

SOURCE: where is the turn signal flasher/relay for 2004

under the dashboard

Posted on Jul 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is turn signal flasher located on unidentified vehicle?


The turn signal flashers on unidentified vehicles are usually above the pedals down under the dashboard on the driver's side. If you turn on a signal and look up into the wiring under the dash you should hear the clicking noise which might help you to locate the flasher unit. If the signal flasher isn't working or making noise, try the emergency flasher. The flasher units usually are close to each other and look alike.
Good luck.

Sep 13, 2015 | Cars & Trucks

1 Answer

Re: 1989 Oldsmobile cutlass supreme turn signal flasher unit location, any photos to support the location.


Flashers

Print
The turn signal flasher is mounted in a clip on the right side of the steering column support bracket. The hazard flasher is located in the component center, under the instrument panel, on the right side. Replace the flasher by unplugging the old one and plugging in the new one.

May 25, 2015 | 1989 Oldsmobile Cutlass Supreme

1 Answer

Where is the signal flasher in a 1989 buick skylark,i know where the hazard flasher is.


Here you go Tom , The Flasher is located: Front seating area, driver side, under dash, above fuse block, mounted on kick panel
Application:
Turn signal

Mar 10, 2015 | 1989 Buick Skylark

1 Answer

The location of emergency flasher on 1989 chevy s10 blazer


It's been a while. But one of two locations. The fuse panel under the dash. One side holds the turn signal flasher, on the back side right behind the TS flasher is the hazard flasher. Both are the same. The next place is hanging on the wire/plug. it is hanging off the steering column close to the dash. Again both flashers look and are the same.

Mar 02, 2015 | Cars & Trucks

1 Answer

I have a 1989 ford ranger and my signals when i turn them on stay lit they dont blink what is the problem? What should i do?


this sounds like the signal flasher is no good and needs replacing.its located under the dash to the left of the steering colume,put the hazard lights on and look under the dash and locate it.the signal flasher looks the same but is a different flasher and should be in the same area.

Nov 09, 2011 | 1989 Ford Ranger

1 Answer

Can not locate turn signal flasher unit. located hazard flasher but turn signal flasher is not on the same block even though the block is labeled for the turn signal flasher.


usually the one flasher serves both turn signal & hazard flasher, if either one isn't working you may have other problems.....hope this helps.....cheers.

Jun 27, 2011 | 1989 Plymouth Acclaim

1 Answer

Turn signals do not work


This is one FLASHER fault; ?m referring to the blinker "flasher fuse", it is the bottom round fuse under the dash in the fuse block.

REPLACEMENTThe turn signal flasher and hazard units are usually located located under the dash either to the left or right of the steering column on most models.
  1. Remove the turn signal flasher unit or hazard unit by pulling them up from the electrical connection.
  2. To install, push the unit(s) into the electrical connector

Good luck (remember comment and rated this).

Apr 10, 2010 | 1989 Jeep Comanche

1 Answer

1989 chevy 1/2 ton.brake lights or emergency flashers dont work.tail lights an blinkers work.


The Blinkers and the Brake Lights are the same bulb. So check the brake light switch. Flashers use a different flasher unit, than the turn signals

Dec 16, 2009 | 1989 Chevrolet K1500

1 Answer

Turn signals and brake lights won't work on my


try replacing the flasher first. and check the two fuses for hazards and signals.

Sep 19, 2009 | 1989 Chevrolet C1500

Not finding what you are looking for?
Cars & Trucks Logo

1,225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...