Question about 2002 Lincoln LS

1 Answer

My window fell inside the drivers side door,and I need to know how to take the door panel off to replace the window regulator.

My drivers side window fell inside door. will not come up.

Posted by on

  • argylewillia May 15, 2009

    I need to know how to take the door panel off on the drivers side.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,689 Answers

Hi argylewillia,

Sounds like your window assembly has failed or the cable has broken. Aneasy repair, once the door panel is removed and the assemblydisconnected from door.

you may disassemble your door panel to find out what happened to the assembly. just click on the link below so you will be able to get general idea on how to get your door panel opened.

hope this helps,


Posted on May 15, 2009

  • marlon john madrid
    marlon john madrid May 15, 2009

    if you open the link I gave out earlier or the link below, this will show you how common power door panels are removed for repair and parts replacement.




1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The drivers side window fell into the door of 96 rendezvous. How do i put it back on track?

The door trim is held on with a combination of screws and push clips Once you have the trim off you will probably find that the window motor regulator is defective. I would recommend replacing the regulator and motor as an assembly.

Are you sure of the year? Didn't think that they made a 1996 Buck rendezvous


Feb 23, 2015 | Cars & Trucks

1 Answer

My 2001 Ford expedition window driver side fell and I don't know how to fix it

remove door panel interior and carefully install bottom of window back into regulator and tighten or replace clips that hold it in place and reinstall door panel

Aug 07, 2014 | Cars & Trucks

1 Answer

Drivers side window fell. what caused this and how do i fix it?

Broken Window Regulator Cable

Remove the inside door panel to access
the inside of door, to replace necessary parts

Jul 30, 2011 | 2002 Lincoln LS

1 Answer

Glass fell 99 olds 2 door left side...regulator needs to be replaced in Riverside CA area

glass fell down in door bolt to equalizer arm to regulator fell out of place missing or window regulator have to remove door trim panel. you need a haynes repair manual to show you how to remove door trim panel. and door panel screws location to door need see screws location to remove power windows and door lock will need door panel trim removal tool.

Jun 06, 2011 | 1999 Oldsmobile Alero

1 Answer

Window fell off track on driver side door

Remove the inner door panel and check out the problem

I don't think it fell off anything

I believe you will find a broken window regulator

Feb 03, 2011 | 2002 Mercury Mountaineer

1 Answer

Drivers window fell inside the door and I can hear the motor going but something is flopping around in there ? Ideas? Is there a video to show me how to remove the door panel without messing it up?

Please see my tip at . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

I don't have video, but below are some drawings of your door. The manual says to remove the switch panel first--does it have screws on it? Then disconnect the cables from the switch panel. I believe your panel has hooks like the pic at the above link. Remove the screws and pull the panel up. then disconnect cable connectors. Also, remove the speaker if you need to take the window regulator out. Let me know if you have questions.

cf575ba.gif Fig. Window regulator arm nuts

41408fc.gif Fig. Window regulator bolts

Oct 04, 2010 | 2006 Lincoln Mark LT

1 Answer

Why did my drivers side window fall into the door?

the window is hooked in to a braket in the door to the reglator could of poped out and fell or something is wrong with the regulator where it mounts to the inside the door have to pull off interior panel to see inside door

Aug 15, 2009 | 2003 Hyundai Tiburon

1 Answer

Subaru impreza/ manual side window stuck

You are having a problem with the "window regulator" remove the door panel, see if the window regulator bolts fell out. they are usually in between the plastic door covering and the door or inside the door on the bottom. they are four bolts that a 10 mm wrench fit, they are short about 1/4 of an inch long, if they fell out you can simply put them back in (I recommend using lock tite on them) These bolts are located in the middle of the door a little towards the front. If your bolts are still in place you probably need a window regulator.

Mar 22, 2009 | 1996 Subaru Impreza

Not finding what you are looking for?
2002 Lincoln LS Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts


Level 3 Expert

76846 Answers


Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides