Question about 2000 Dodge Durango

2 Answers

2001 4.7 dodge durango engine stalls at idle or while driving no check engine light on most the time...what is the problem ...

Posted by on

  • dannyajames May 15, 2009

    i checked the EGR system and dont bbelieve that is the problem.when this problem happens the engine dies the check engine light will come on and you will hear the system reset then you can start the unit back up with no problems and the check engine light is off with no codes present at all

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

It could be a couple differentthings, first I would check the EGR Valve, it could be sticking open/leaking. Or it could be IAC valve (idle air control) sticking or faulty. Or it could be the MAF sensor faulty or damaged.

Posted on May 14, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I'll bet it's either the camshaft or crankshaft positioning sensor. get an Equus innova 3100 for about $70 on ebay and check the code yourself.

Posted on Aug 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 dodge durango stall while driving


Try running a fuel injector cleaning additive in your gas. Buy at Pep Boyz or other auto parts house. It's almost certainly a fuel delivery issue, not electrical. But check battery cables anyway and make sure they're tight on their posts. A loose cable will stall you too.

Feb 16, 2015 | 2001 Dodge Durango

1 Answer

Dodge durango stalls after starting


There may be a fault code or codes stored, though. Have an engine scan done for trouble codes as a first step in diagnosis. If no codes are present, I would start by investigating the idle circuit-clean the throttle body and have the IAC (idle air control) tested for proper operation. Good luck.

Jul 12, 2012 | 1999 Dodge Durango

1 Answer

Hello, I'm currently living on Guam and cannot find a mechanic who can correct my 2001 Dodge Durango (with error code P 0108) probelm. It will occassionally idle rough and stall. At times the "check...


P0108 = MAP sensor circuit high voltage

The MAP sensor communicates the barometric pressure inside the intake manifold to the ecm.
This code can indicate either a fault in the MAP (manifold absolute pressure) sensor, or a possible vacuum leak, either from a hose or the intake gasket.

It could be the connector on this sensor isn't making good contact. I would check the connector before you replace the sensor. It more than likely needs a new MAP sensor.

Jan 20, 2011 | 2001 Dodge Durango

1 Answer

2001 Dodge Durango problems with rough idling and stalls.


Hello... Where to go next depends on how the Evap Gross Leak was fixed... Post it...

Thx.

Jun 16, 2010 | 2001 Dodge Durango

1 Answer

Engine runs and drives fine until it sits and idles.The engine loads up stumbles and stalls.


Has the check engine light came on. Sound like a O2 sensor. But you can have the codes read for FREE at any Advance or Auto Zone Store. Hope this helps.

Dec 07, 2009 | 1999 Dodge Durango

2 Answers

2002 durango has recently started to stall after it has been filled up. today it would not stay running unless foot was on the gas at all times


try this.
Here is the common cause of surges, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Sep 09, 2009 | 2003 Dodge Durango

1 Answer

Engine lights on


check the oil level if oil is good you have whats called valve noise on inside of engine switch to a heavier weight oil and the noise will get lower but get the light checked

Jun 30, 2009 | 2001 Dodge Durango

1 Answer

Loacte the fuel filter on 2000 dodge durango 4.7 liter v8


if i am not mistaken the fuel filter is built into the fuel pump. which requires you to drop the tank and replace both.

Jun 01, 2009 | 2001 Dodge Durango

2 Answers

Stalling problem


Time to replace the fuel filter and fuel pump sock.

May 30, 2009 | 2001 Dodge Durango

2 Answers

99 Dodge Durango Dies When Slowing


Here is the most common cause of surges and stalls and low idle rough idle, it is the idle speed control air-bypass valve and throttle valve (IAC for short), they get full of gunk over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Feb 09, 2009 | 1999 Dodge Durango

Not finding what you are looking for?
2000 Dodge Durango Logo

2,188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...