Question about 1992 Toyota MR2

1 Answer

WHEN STARTED THE ITS OK ON IDLE,THEN AFTER RUNNING FOR A WHILE, RPM DROPS THEN IT RUNS RICH THEN STALLS.SOME TIMES IT WONT START AS IF ITS FLOODING.WHEN RUNNING SOME TIMES IT MAKES A INDUCTION NOISE.

Posted by on

  • kevinluu69 May 25, 2009

    i have same problems and i am not a mechanic.
    First i cleaned the choke,really good.
    There are 2 adjustment needs to be adjusted.
    The air and rpm, they are close to choke, one had a white plastic flat head(please mark them before adjust) and another one has a black rubber on the top cover , remove and adjust it. Good luck with the tunning.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Choke may be sticking

Posted on May 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 golf starts but soon rpm drops then stalls. will start again but soon stalls


I had a 78 rabbit did the same thing. It was the fuel pump relay. The connector was under size and burnt up. When you star the car on the old Rabbit the pump runs off the ignition switch. Once it starts the relay needs a pulse from the distributor to let it know that the car is running and keep the pump running after it starts. If not the relay times out and pump stops pumping gas. Its for safety so if in a accident and the engine stops the pump wont pour out gas

Jul 25, 2017 | Cars & Trucks

1 Answer

Periodically, EPS comes on Dashboard ,then steering becomes too hard, this will disappear two to three times re start the vehicle or running few meters and switch off the car and re start the car.


well I can't drive it and see all symptoms.
i can't see the idle speed drop below 800 RPM,. !
if the idle drops real low, then engine shakes, and PS gets weaker.
Id ignore the EPS till such time as all other things are perfect.
ever get an engine tuneup this decade?
low engine RPM , top number 1 cause is owners not servicing their cars. (spark plugs bad tops that list)
if you ignore that, tuneup the engine WILL misfire and RPM will drop and P/s (means power steering)will get weak (the assist is pump driven) and then the engine can stall.
i bet you also forgot to say the steering got weak
park or coming to a stop with foot off throttle.
do the head lights dim as this (bad) happens?
can you use your right foot to keep RPM above 800 and save stalls or near stalls?
IF RPM is ok, ?then check the fan belt next. (slips)
or buy a new on, my guess is 11 year old belt is kinda hopeless case.

Aug 14, 2015 | 2004 Suzuki Swift

1 Answer

Erractic idle--when driving or parked the idle is either fast oor slow or it stalls out


not posting engine option, makes all answers, weak. all !!!
EFI system , control idle at all times. and hot it very tight 800 RPM
at all times.
there are 2 reason. (and lots of causes. over 50)
1: idle controls are dead. test them.
2: engine AFR is way lean, misfiring (bogging) or too rich misfiring .

on our USA cars, we check (SCAN IT) to see if closed loop status
happens at idle. if it dont we fix that FIRST.
if it is , then we fix ISC/IAC>

the ISC can lose control if it sticks or there are air leaks to the intake system

the first test is always to scan it , ill assume the 60,000 mile tuneup
was already done. after all why expect a bad running engine to idle correctly?

Apr 15, 2014 | 1999 Isuzu Rodeo

3 Answers

S10 Blazer running rich. Low RPM at idle. Sometimes stalls when driven in reverse.


These alone will case the problem with the running rich. It is getting more air so it is calling for more gas to keep it running. Get these problems fixed and will see a big differents in how it runs.

Dec 10, 2012 | 2002 Chevrolet Blazer

1 Answer

1998 Cavalier Quad 4 2.4l runs rich wont rev past 1500 rpm


can be a mass air flow, idle air flow ,or even a hole in the tube between the airbox and the throttlebody........any air leak will cause this to happen.make sure you have no vaccuume lines off either

Feb 01, 2009 | 1998 Chevrolet Cavalier

1 Answer

1990 Ford Probe 2.2 automatic stalls in forward, reverse OK


Sounds like a bad IAC (idle air control valve/sensor) that controls your idle when going from throttle to idle. If bad your idle will act crazy and can cause stalls easily. Pretty sure that's it.

Dec 20, 2008 | 1993 Ford Probe

Not finding what you are looking for?
1992 Toyota MR2 Logo

Related Topics:

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...