Question about 1995 Chrysler Cirrus

2 Answers

How do I change the three speed sensors on the transmission

My 1995 chrysler cirrus's transmission is not changing gears and the speedometer is going crazy. Was told by a friend mechanic if was probably the 3 sensors on the transmission, which are the speed sensors. I found one but can't find the other two. HELP!!

Thanks,
Sergio

Posted by on

  • tolib81 May 26, 2009

    Hi, I am concerned of the similar but still different problem with my 
    (year 2000) Stratus 2.5 V6 Automatic 
    (it is a Cirrus made for the european market), so 


    -the speed indicator remains still, any advises?


    I have been notifying some oil leakage from the transmission which is automatic 
    thanks
    Tolib

  • yadayada
    yadayada May 11, 2010

    the very 1st thing u do is have the dealer run the electronic system test for trouble codes, THIS IS NUMERO UNO! TO UNDERSTAND HOW TO BEGIN TO FIND AND FIX THE PROBLEM

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Change the out put sensor on the rear fo trans its cheap at auto zone 19.95

Posted on Dec 21, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Go to pep boys and by the book for your car! it will tell you everything and anything that you can possibley think of

Posted on May 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 cirrus want change gears goes in drive and reverse inside on the dash where it tells you what gear you in all has squares around them speedometer doesn't work


Sounds like a speed sensor, I will look into that, but if the speedometer isn't working, its either cable, or electronic. Being a 2000, I'm guessing electronic. Chrysler have a lot of electronics on the transmission, as they are electronic themselves. I had an alternator go bad and my battery died, and the car wouldn't shift, it actually down shifted while driving. Have your battery and alternator checked first, then sensors. Like shift silinoid, speed sensor etc.

Apr 04, 2015 | 2000 Chrysler Cirrus

1 Answer

What does a shaft speed sencer do for a 2000 cirrus


According to Stratusphere.net, "Symptom: The car won't shift out of 1st gear. The 'Check Engine' light is on.

The speedometer doesn't work for this one. You're only able to go about 30 MPH without going above 4000 RPM.

Likely Cause #1: The Output Shaft Speed Sensor went bad.
Likely Solution #1: Replace the sensor (Part #4800879)."

The good news is that they are relatively cheap if you can install them yourself.

Apr 03, 2015 | 2000 Chrysler Cirrus

1 Answer

1995 cirrus transmission limp mode


THE INPUT & OUTPUT SPEED SENSORS ARE ON THE TRANSAXLE , THEY HAVE A TWO PRONG WIRE CONNECTOR @ EACH SENSOR. THEY ARE IMPORTANT !!!! THEY SEND INFO TO THE CONTROL SOLONOID FOR SHIFT QUALITY AND SHOULD ELIMINATE THAT LIMP MODE CONDITION. I WOULD ALSO CHANGE THE TRANS FILTER & FLUID, USE ATF+4 FLUID ONLY , DONOT USE DEXRON FLUID, ITS NOT GOOD FOR THIS TRANSAXLE, USE ONLY ATF+4 , ONLY !!! CLEAN PAN & THE SMALL MAGNET IN BOTTOM OF PAN . USE A NEW GASKET & FILTER. THE LOCATION OF YOUR SENSORS ON THE TRANSAXLE , STANDING IN FRONT OF CAR, HOOD OPEN, LOOK DOWN @ TRANSAXLE, (TRANSMISSION), USE FLASHLIGHT TO LOOK FOR SENSORS, INPUT , MIDWAY, CLOSE TO CONTROL SOLONOID, OUTPUT, TOWARDS WHEEL. LOWER AREA/TRANS, ARE YOUR NEUTRAL SAFETY & BACKUP SWITCHES ! THREE PRONG CONNECTORS, HOPE THIS HELPS !

Mar 31, 2013 | 1995 Chrysler Cirrus

1 Answer

My tachometer is on the other side of the marks, cirrus 99


try to test the fuse b) check wiring c) check resistance and voltage.
the pin 18 in I.circuite will have 12Vdc positive.
the pin 8 is tach ground and test it.
God bless you

Oct 04, 2012 | 1995 Chrysler Cirrus

2 Answers

Trans stays in limp mode, speed sensor has been changed,speedometer does not work, if speedometer head was bad or unhooked,would that cause mw problem? It is a 1995 chrysler cirrus


Hi,
Your engine management and maybe even your transmission is controlled by the ECU. As such, many ECU units are fitted with a 'limp home mode'. When it detects that something semi-serious is wrong, it enters the limp mode, which means that the engine won't rev beyond a pre-programmed speed, you can't accelerate very fast, or you may indeed be speed-restricted to 40 mph or similar. The transmission may even stay in one or two gears. The alternative would be to either let you drive at regular speeds, with the danger of letting you trash your car or stopping you from going anywhere .
You should have a Check Engine light. Go to a major chain auto parts store and they should read the ‘code’ for free, then go to rdtiburon.com and ask what the code actually indicating or is really bad to your car. They will advise you what you ought to do.
Because you replaced the speed sensor and are still experiencing the problem, we suspect that you have a faulty speedometer cluster.
Please check this link and go through the article to have an indepth knowledge to your problem....

http://geekswithblogs.net/lorint/archive/2005/12/21/63765.aspx
Let us know if you want something else please accept the solution.
Thank You for contacting fixya.com

Apr 27, 2010 | Chrysler Cirrus Cars & Trucks

5 Answers

99 chrysler cirrus lxi won't shift out of 2nd, no speedometer


Had the same problem on my 1999 cirrus lxi. Replaced the output speed sensor on the tranny and topped off the tranny fluid... cleared the check engine light and the cirrus ran great. Caution...the output speed sensor reqires removal of the front left tie and plastic weatherproofing to replace. once you find it's locvation, the replacement is relatively easy.

Oct 30, 2009 | 1999 Chrysler Cirrus

2 Answers

1999 chrysler cirrus not shifting out of 1st gear


Speedometer sensor is usually in the cars computer. Sounds like it's electrical though. Could be a sensor part of the alternator. Call Advanced or auto zone. Some places can test stuff like that for free.

Jun 18, 2009 | 1995 Chrysler Cirrus

2 Answers

My transmission willnot shift out of 1st gear and no speedometer


check for low fluid .governor valve sticking.1-2 shift valve sticking.2-4 servo passages restricted.2-4 band worn .band not engaged in the anchor pin.

Jun 18, 2009 | 1995 Chrysler Cirrus

2 Answers

Chrysler Concorde 1998 dies on idle


Speedometer quit working-consider vehicle speed sensor.

Apr 09, 2009 | 1998 Chrysler Concorde

4 Answers

Transmission chrysler 2000 2.4 liter


Change the trans.fluid and at the same time check the lenkage.

Jul 26, 2008 | 2000 Chrysler Cirrus

Not finding what you are looking for?
1995 Chrysler Cirrus Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...