Question about 2000 Saturn SL

1 Answer

Removing 2000 saturn fender

How do i remove the driver side fender? I have all the bolts taken off but I can't get the clips or screws off where it's attached at the top of the door. Please help me!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 710 Answers

IF YOU LOOK ON THE INSIDE OF THE FENDER WELL, BEHIND THE PLASTIC SPLASH GUARDS, YOU SHOULD FIND THE BOLTS THAT ARE HANGING ON TO THE FENDER. HOPE THIS HELPS. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA. PLEASE KEEP ME POSTED.

Posted on May 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace headlight on 2009 saturn


  • saturn aura replace headlight bulb with bumper on!
    [img src="https://i.ytimg.com/i/QnvVxud6_7t7W6Rm2ABgnA/1.jpg" alt=" [a href="https://www.youtube.com/channel/UCQnvVxud6_7t7W6Rm2ABgnA"]execlon's channel
    44 50,720
    • Start at:
    Published on Mar 8, 2013
    Remove 5 -10mm bolts 4 on plastic cover under hood 1 on air cleaner hose.
    Remove 2- clips with flat head on plastic cover under hood
    Remove 6 7mm screws (headlight brackets)
    Lift up and over hood latch the center cover plastic
    Pull inner side of headlight outwards and outter side towards middile of car and out.
    Its hard but you can get it to pop over the corner of fender. I did it all in around 15 minutes
    Dont give up it can be done! sorry about not having more video my hands were busy at the end.










    Dec 14, 2014 | 2009 Saturn Aura

    2 Answers

    How do I replace the driver side fender on my 2012 dodge journey?


    remove fender you have to raise vechicle remove wheel. remove splash shield remove bolts holding fender through wheel opening.then you have open hood remove headlight housing remove fender bolts behind head light housing.

    Apr 03, 2013 | Cars & Trucks

    1 Answer

    How do i take off the driver side door panel


    You will first need to remove the phillips head screw holding the plastic piece on the handle. Underneath the armrest handle there are two bolts that need to be removed. If you have manual windows the is a metal clip that holds the handle on that can be taken off with a flathead screwdriver. After you get that off the panel should just pop off.

    Nov 04, 2009 | 2000 Chevrolet S-10

    1 Answer

    Window moves a bit still won't go up or down on passenger side


    I had a similar issue with mine, passenger side. I went online and ordered a new power window regulator and replaced it, there are many parts warehouses available online, like autopartswarehouse.com. or if you go to the dealer, they want 320.00 for the part. you will need to remove a few screws in the door latch area and armrest. pry off the panel with a flat blade screw driver or pry bar, starting at the bottom corner. you will need to pull and it will make a loud snapping noise, this is normal. carefully remove the plastic lining, you will need to remove the three bolts around the motor, the 4 bolts (two on each side of the window tracks, and the retaining clips or bolts connecting the window to the window base). re install as you have taken apart, 2-3 hours, Good Luck!

    Sep 19, 2009 | 2000 Jeep Grand Cherokee

    2 Answers

    Do I need to remove the front fender


    Yes if your replacing the ant. base you will have to remove or partially remove fender to gain access to the lead through the spaceframe.

    Apr 26, 2009 | 2000 Saturn SL

    1 Answer

    Remove right front fender on 2005 odyssey


    NO 2 BOLTS ON TOP OF FENDER UNDER HOOD 1 BOLT BEHIND PLASTIC TRIM BY MIRROR PULL THIS PIECE BACK TOWARDS MIRROR OR IT WILL BREAK TABS OFF 1 BOLT UNDER ROCKER TRIM 1 SCREW INTO ROCKER AND 1 SCREW BEHIND PLASTIC SHROUD GOING INTO BUMPER FROM UNDER NEATH PULL BUMPER BACK SLIGHTY AND YOU WILL SEE A WHITE PLASTIC CLIP PULL BACK AND BEHIND THIS IS A BOLT REMOVE HEADLIGHT CLIP FROM FENDER AND LOSEN BOLT BY HINGE NOW FENDER SHOULD COME RIGHT OFF BOOK IS 2 HOURS TAKES 1 HOUR TO REMOVE BUT GOES ON IN ABOUT 30 NINUTES

    Mar 16, 2009 | 2005 Honda Odyssey

    1 Answer

    2000 chevrolet malibu headlight replacement problem


    there are no hiden screws only one on top of fender.if u remove the two plastic clips and the one bolt it still needs to be pulld out since there is a probe on the outer side that clips in the fender. i would pry with a plstic prybar beetween fender and headlight

    Jan 20, 2009 | 2000 Chevrolet Malibu

    1 Answer

    Headlight out on 2000 chrysler m3000


    remove bumper
    then there should be retaining clip or 2 screws holding the lamp in OR

    remove the wheel fenders and behind the wheel fenders you will see clips or screws this will be little tricky but you can do it one side you will have to remove battery also to get to lamps

    OR jack car up enough to get your hands behind lamp unlock there clips and pull lamp out bulbs should stay put

    Nov 26, 2008 | 2000 Chrysler 300M

    1 Answer

    Front fender removal


    Hiya... here's the details of fender removal/installation:
    the left-side (same for right-side) fender has 6 bolts attached to the "sidebody" frame.
    The bolt location:
    3 are on the top fender-easy to find when hood is open,
    1 is hidden at the rear of top inner fender-just open the left-front door wide to find it (early equinoxes had foam-like noise absorber material in it, just remove it from underneath fender after the wheelwell liner is removed),
    1 bolt is hidden at bottom of front fender area at headlight/bumper area-you need to remove plastic wheelwell liner to gain access,
    1 bolt is hidden at bottom of rear fender area where the black plastic rocker panel meets below the fender...
    THIS area is probably the most difficult task to do since it requires you to remove a small bolt found on the front of rocker panel behind the front-left wheel then use a flat screwdriver or clip removal tool to pry open the black plastic **clip's 'dime-sized' head prior to pull out the clip's body (it has 8 clips underneath the chassis) then use your hands to grasp the rocker panel underneath, pull it down-toward you...this should do it....USE CARE during rocker panel and clip removal/installation so you don't break the clips!
    It also has yellow plastic clips inside the rocker panel (used as a guide during installation into rocker sill holes-use caution not to break it)
    **note: early equinoxes had rocker panel clips that you can actually pull it out from the hole, while later equinoxes has 'built-in' clips inside rocker panels that you don't see the clip heads below it due to engineering part design change**
    Be sure to exercise care when handing this task!

    808b156.jpg

    Nov 20, 2008 | 2005 Chevrolet Equinox

    Not finding what you are looking for?
    2000 Saturn SL Logo

    Related Topics:

    97 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Saturn Experts

    yadayada
    yadayada

    Level 3 Expert

    75077 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7768 Answers

    Are you a Saturn Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...