Question about 2004 Hyundai Santa Fe

1 Answer

Santa fe 2.4 petrol manual

I changed the battery car started ok, but now i have a quiet (alarm, buzzer) on when i go in to the car, when i turn the ign on the sound stops.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.

Posted on Jun 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi,I have a 2001 Pt Cruiser. The key fob stopped working.. replaced batteries but still no joy.The key opens the drivers door, but as soon as I remove the key it locks again.The passenger door opens and...


get the fob checked at a dealer as this sends random signals to the ign system as part of the alarm/anti theft systems ,if ign system not getting signal the anti theft system thinks cars being stolen ,using correct key in ign lets you dive vehicle but you may be storing up more problems the longer you leave it

Mar 26, 2014 | Cars & Trucks

1 Answer

Buzzer sounds at random in 2004 Focus


LOL... the rear hatch needs to be realigned.. try moving the latch catch back a bit so it seals correctly!

Jul 30, 2012 | Ford Focus Cars & Trucks

1 Answer

1999 saturn sc2 alarm reset


ign.switch iv changed alot of them

Jun 03, 2012 | Saturn SC Cars & Trucks

1 Answer

Key fob wont re set on my ssan yan rexton


I recently changed the battery on my key fob for my ssanyong rexton. I then did the following for the key fob to make it work. 1. Enter vehicle and close all doors.

2. Put seatbelt on (or clip it into the buckle) to shut the warning buzzer off.

3. Put key in ignition, turn to run position but don't start it.

4. Press and hold both buttons on key fob until red light on fob stays on. Then let go of both buttons. Then pressed the alarm button then the panic button, somthing like that. To be fair the button sequence after the red light came on is a bit vague. The alarm was blaring so i was happy when it just stopped.

May 23, 2012 | SsangYong Rexton Cars & Trucks

1 Answer

I have a 1996 3.8 liter camaro. I was driving my car down the road when the gages started jumping and i found out that problem it was the battery and aldernater well after i changed them problems i have...


Hmmm, a puzzle.

The only way to disarm these alarms is with
the factory remote or turning on the ignition.
To turn off the factory alarm.

Ok, do you have the remotes?
If so, let's ID the system.
Go to www.KEYLESSRIDE.com & use th fcc #s
on the back of it.

If not try this:

Programming Factory Security on GM Cars and Trucks
Instructions for programming the GM factory security systems that do NOT
disarm from the driver's door key cylinder. This programming is for the
cars and trucks listed below.

96+ Camaro
96+ Firebird
99+ GM Trucks
99+ GM Sport Utility Vehicles

Step #1 Turn the ignition on then off.

Step #2 Remove the radio fuse only (not the fuse that says acc/radio).

Step #3 Turn the key to the accessory position. When you do this you
will get two chirps from the door buzzer. Should you hear only
one chirp, your vehicle does not have factory security and these
instructions do not apply. You need to hear two chirps.

Step #4 Press the unlock switch on the door. This will give 1-4 chirps
depending on the program step. Continue pressing the unlock
switch until you get to the desired chirp setting.
1 Chirp - Security off
2 Chirps - Remote Only
3 Chirps - Factory Setting
4 Chirps - Passive Arming

Step #5 Turn the ignition off.

Step #6 Put radio fuse back in.

Jul 03, 2011 | 1996 Chevrolet Camaro

1 Answer

Had the alternator replaced 2 days ago and during the night the alarm goes off lights flashing honking use the key fob to turn it off and takes a while for inside light to go out stays quiet for a while...


Hello, sounds like you need a new battery. As the battery goes flat the alarm senses it and sets off the warning system. Try changing the battery first and test it during the day. Also check to see if there is anything draining the power. You may also be able to adjust the alarm settings manually. Failing that, the alarm may need replacing. I hope I have helped.

Mar 24, 2011 | 2003 Chrysler PT Cruiser

1 Answer

Triton 2000 2.4 . Is there any type of relay from the ign switch. All of a sudden nothing from ign key. power ok. when turn ign on to start nothing except fast clicking from under dash.


battery starter or selenoid on starter...sounds like weak battery tho...be sure to eliminate by trying to boost tapping on starter while attempting to start may also work as they get stuck up sometimes.hope this helps.

Mar 21, 2011 | Mitsubishi Passenger Cars & Trucks

1 Answer

I bought a Chevy Trailblazer, used, had keyless remote access Viper Alarm after manufacturer. Had trouble with transmission and alarm....took to Chevy dealer they replaced transmission. Now the remote...


You need to find the black push button called the valet button. That is the overide. Get in the car turn the key to IGN as the alarm is going off and then you have either 5 or 10 seconds to push that button once and then 2-5 seconds later the alarm is shut off. To put the car into valet mode which means no alarm at all you put the key to IGN push that button once then pull key out at which point the blue light should turn solid blue.

Or option two is you open a door and hit the lock, then unlock, then lock button again on the remote and the blue led will be solid which means no crazy alarm.

Mar 08, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

How to disable 2000 elantra car alarm


ok are you ready, first turn the ign on but do not turn the key to the start position, the alarm should sound, as soon as the alarm stops sounding, count 10 seconds then start the vehicle,this will disable the alarm unless you set it with the remote, if that doesent disable it repeat above again it has to be 10 second count after alarm stops..

Oct 21, 2009 | 2000 Hyundai Elantra

1 Answer

ELECTRICAL MISTERY


Here's a first step: Put key in ignition, turn on but do not start car. When dash lights up, the alarm light will flash if it has been triggered. If this alarm light is flashing, you have set off the alarm. Here's how to reset it: Leave key on, and let the thing flash for five minutes or so. Finally it will stop flashing on its own. Now start the car. If it runs ok. Kill it and turn key back on to check if light has stopped its flashing. This may be way off, but that is the reset procedure for alarms on those blazers. Man I've seen a bunch of them in my shop this year!!!

Mar 20, 2009 | 1996 Chevrolet Blazer

Not finding what you are looking for?
2004 Hyundai Santa Fe Logo

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...