Question about 1997 Ford Escort

2 Answers

Can i fit a 2 ltr 16v zetec head on a 1.8 16v zetec block

Can i fit a 2ltr 16v zetec cylinder head on to a 1.8 16v zetec engine block

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Yes, but you'll lose performance. The 2.0 head has a larger combustion chamber so you're effectively LOWERING the compression. A 1.8 head on a 2.0, that would be beneficial.

Posted on May 25, 2009

  • collopenm Nov 29, 2010

    do u know how much the compression would be lowered by?

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 500 Answers

No, even if they did bolt up, it would probably not run very well and the check engine would most likely be on...

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1996 ford escort zetec engine 1.6 16v,I need its spark plug wire diagram.please help.


the firing order is 1342 1 is at the lh has you look from under bonnet the ignition coil is on the right bolted on cyl head or block area its a waisted spark system so 1and3 are powered from one half of the coil 2and4 other side the coil may have no,s on them but in short 1 are opposite as are 2and4 so try in that order 1st if not swap around in pairs

Apr 13, 2017 | Ford Cars & Trucks

1 Answer

How much is the engine head of Mazda 3 1.6 2007 16 v


Mazda 3 Cylinder Head ' eBay

www.ebay.com/bhp/mazda-3-cylinder-head
eBayEngine Cylinder Head Bolt Set Fel-Pro ES 72207 (Fits: Mazda 3) ... 2.0l & 2.3l dohc l416v, w/ turbo, "duratec" 2004 - 2009 mazda 3 2.3l dohc l4 16v. 2007 - 2009 ... #O608 RIGHT CYLINDER HEAD 2007 MAZDA3 2.0 MANUAL 4683894AC.

Oct 29, 2015 | Mazda Cars & Trucks

1 Answer

Jeep block casting code 53008403


what are you doing> , buying a bare block?

why not say what is in hand. (fit what? just tranny and mounts or what? , be legal or make EFI happy, or ? all other parts on engine?)

i did a www scan and in 1 second, bam the 4 banger

not the 4 liter.



2.5L gas engine not the diesel of same size.

so...

1984 to 2002 run (all year run lenght) not an answer.



http://en.wikipedia.org/wiki/AMC_straight-4_engine



what does FIT mean.

to the mounts, the transmission, all will

pass smog

be legal, say in CALIF? (strict year codes there.... btw)

make EFI happy (fit)

just the block, short block or just a naked block. you never said./

key fact on bell housing

Instead of the standard AMC bell housing bolt pattern, AMC/Jeep engineers adopted the General Motors small V6 and four-cylinder bolt pattern



short answer, all years fit, the short block.



In 1986 the head went under a minor revision, the head bolts were increased from 7/16 to 1/2 inch.

id bet that be lowest year.



http://www.allpar.com/mopar/amc-25.html



any with 1/2"head bolts





here is a nice page. google hits are free. huh?



http://engineguy.com/jeep-dodge-chrysler/2-5l-1.html?dir=desc&order=name



crank snout?

oil bypass

head bolt sizes

for sure the best answers are at all the top engine builders pages.

never on ebay. avoid them for facts.





you need a 530 block.

shop for that.

Apr 20, 2014 | 1998 Jeep Wrangler

1 Answer

Where is freeze plug on 1995 geo tracker


old post.
This is really a suzuki G16 engine question
thats ok,
The G16s are used on Suzuki's and Trackers
Vitara's , Esteems, no others world wide.

I have all the photos and books on those cars.
real books and all parts lists. on them , graphics tool.
the freeze plugs (core plugs on all over.)
IN 1996 only one engine, G16b.
But all G16 blocks these are the same.
sides on all G16 base blocks.
2 left side 1 above filter, one just to rear of that, they are huge.
have to be blind to miss left side, (left means same as left car door)

the problem here is there are 2 engines in 1995, then one in 1996
the heads on both engine are NOT THE SAME>
the head is 8v and 16valves heads
and the 16v has freeze plugs in the top ,next to the cam. inside under valve cover !!!.

why not say where the leak is so we can narrow the search. or state the JOB?????????

i have photos of all parts in any G16.
there are no freeze plug in any 8valve head.
but the 16v yes !!!
the 16v head small inside plugs, if leaking turn the engine oil to milk chocolate fast and worse of driven. (just undid worst)

the blocks are the same, both engines, not pistons,
there are no front or rear engine block freeze plugs only side plugs 4 total.
and sure the right side under intake man will be hard to see. look under car right side to see em.
2 left easy to see and 2 right harder.
the right engine block has 2 freeze plugs one in easy view center , under intake man.
and one tucked behind that water manifold that can leak too.
now the last plugs
the 16valve head has a front freeze plug behind the cam cog wheel. and none on the rear of the head.
so 1 front and 3 inside, top.
My guess, G16b has 8 plugs total.
G16a has 4.

things that go POP in the night (cold night)
the rear water outlet fitting (head) does explode every time one runs this head on pure water, frozen, ask my how I know that, and what clueless girl did that,, heheheheheheheheh

Feb 09, 2014 | 1995 Geo Prizm

1 Answer

Timing belt broke -2000 ford focus zx3 its 16v zetec engine Could you tell me if a 2000 Ford Focus has an non-interference engine or an interference engine. The timing belt broke and I'm wanting to...


I put your question into internet explorer & apparently
there are 2 engines in 2001 & 2001 that are interference

Seen the 2002 are the way to go if your buying one.

You can do a cylinder leak down test & there are some
nice cameras that go into small places that are for checking
things even inside your head thru the spark plug hole

Your not going to buy any of that,but can have those services
performed for piece of mind

A compression test is not really giving you the whole picture
that a cylinder leak down test would

Play around on You Tube & learn all you can

Sep 29, 2012 | Cars & Trucks

1 Answer

Cylinder head tightening sequence for ford mondeo 1.8i zetec petrol


Go to this LINK for the info in pdf format, the sequence is on page 16 of the pdf file.

Feb 15, 2012 | 1999 Ford Mondeo

1 Answer

TORQUE SETTINGS FOR 1.4 16V 04 VAG ENGINE THEY USED IN SEAT LEON 04 16V 1.4.


Cylinder head instructions

Tightening sequence
tdisline_536.jpg
Cylinder head torque setting for 2004 VW 1.4L 16V fitted in Seat Leon
Renew bolts

Stage 1 = 30 Nm
Stage 2 = 90 degrees
Stage 3 = 90 degrees

May 17, 2011 | 2000 Volkswagen Golf

1 Answer

I need troque setting for cylinder head bolts for Madza MX3


zjlimited_1139.jpg

Fig. 1: Cylinder head bolt tightening sequence for all 4-cylinder engines


1. Clean the cylinder head bolts and the threads in the block. Make sure the bolts turn freely in the block.

2. Install a new head gasket on the engine block. Make sure the camshaft sprocket timing marks are still aligned, as set during the removal procedure. Install the cylinder head.

3. Lubricate the bolt threads and seat surfaces with clean engine oil and install them. Torque the bolts in 2-3 steps to 56-60 ft. lbs. (75-81 Nm) in the proper sequence.

Hope helps.

Apr 29, 2011 | 1995 Mazda MX-3

1 Answer

Ford escort zetec .there is a hose attached to the oil seperator pipe just under the thermostat and distributor where does this connect to .. please


Bypass Hose that goes from the water pump to the cylinder head on many "A" series engines. A common point of failure. Always keep a spare. 1 hose and 2 clamps included. Not for 1275's Bypass Hose that goes from the water pump to the cylinder head on many "A" series engines. A common point of failure. Always keep a spare. 1 hose and 2 clamps included. Longer hose for 1275cc engines.

Feb 13, 2011 | 1997 Ford Escort

1 Answer

2001 focus/ect sensor


its screwed into the cylinder head ,when you fit a new 1 dont overtighten it they sense temp of the head they dont screw into the water jacket!!!!!!!!!!!!!!!!!!!!

Oct 09, 2008 | 2001 Ford Focus

Not finding what you are looking for?
1997 Ford Escort Logo

Related Topics:

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...