Question about 2003 Dodge Durango

1 Answer

Keyless entry I had to change the battery on my 2003 Durango a few months back. Ever since the keyless entry "thingy" won't work. Can that be fixed?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 55 Answers

If you do not currently have a fob that works you will have to take it to the dealer and they will use a DRBIII scan tool to re-program it. Is the battery good in the transmitter?

Posted on May 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door locks keyless entry won't work


Try changing the battery in the pad, or check the fuses under the dash

Jan 24, 2012 | 2003 Pontiac Montana

1 Answer

I have a 2003 nissan xterra...can't get the idiot lights for the airbag and check engine soon to go off...and the keyless entry will not work, battery in the keyless has been changed and the vehicle has...


Take it to a different shop. Something is wrong with it. However, when the airbag light is on, that means the airbag will not deploy in an accident. You should have that fixed first. The dealership is the best option for making the keyless entry work. If this was at all helpful, please rate. Thanks for asking.

Jun 29, 2010 | 2003 Nissan Xterra

2 Answers

Keyless entry for my 07 Chevy Impala works on and Off


my 2006 impala keyless remote dont work i change the battery still the same problem the spare remote same problem how to solve this problem

Jul 21, 2009 | 2007 Chevrolet Impala LS Sedan New Cars

2 Answers

How do I program a replacement keyless entry transmitter?


I have a 2003 dodge durango i dont have a working keyless remote how do i program one to kork.

Jun 07, 2009 | 2003 Dodge Durango

1 Answer

Remote keyless entry


I assume you are talking about the key fob. First, pry it open and change the battery. Watch which way the + goes.
If your key fob works, and the battery did not fix it, try reprogramming following the instrcutions in the owner manual. May need both fobs present at the same time.
Note; This is different than programming the anti-theft key.

May 27, 2009 | 2003 Ford Windstar

1 Answer

How do i program remote keyless entry? I replaced the battery and keyless entry quit working,


You don't normally program a keyless entry, that's done for you by the technicians that install that. If the replaced battery doesn't solve the problem, take the battery and the remote to the techies that installed it.

Mar 27, 2009 | 2003 Chevrolet Monte Carlo

1 Answer

How can I fix my keyless entry --wont work (changed bettery)


my keyless entry does not work and i change my battery for both the remote is there another battery or fuse

Mar 23, 2009 | 2002 Chevrolet Suburban

2 Answers

My remote for the keyless entry does not work.


does trunk button work? panic button?
here's 2003 info:


  • The doors do not lock/unlock using the remote transmitter
  • Remote transmitter.
  • Driver door module (DDM).
  • Go To Pinpoint Test G .

SECTION 501-14: Handles, Locks, Latches and Entry Systems 2003 Town Car Workshop Manual
GENERAL PROCEDURES Remote Transmitter Programming
  1. Cycle the ignition from OFF to RUN four times within three seconds. The locks will then lock and unlock, confirming that the program mode has been entered.
  1. NOTE: When the first keyless entry remote transmitter is programmed, all other keyless entry remote transmitters are erased.
    Press any button on the transmitter to be programmed.
  1. If additional keyless entry remote transmitters are to be programmed, repeat Step 2 within 7.5 seconds.
  1. To exit program mode, turn the ignition to START or wait 7.5 seconds.
--------------------------------------------------------------
report back

Mar 22, 2009 | 2004 Lincoln LS

1 Answer

RADIO SCREEN FADES ON THEN GOES OFF/KEYLESS ENTRY WONT WORK


keyless entry was fixed by reprograming the key...

Mar 17, 2009 | 2003 Jaguar X-Type

Not finding what you are looking for?
2003 Dodge Durango Logo

Related Topics:

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...