Question about 1991 Jeep Wrangler

1 Answer

1991 jeep wrangler

I was driving my jeep last night ,and the clutch pedal got some play in it ,and then i could still shift into all 5 gears but was hard but when i push down on the clutch pedal the first 2in of the pedal is loose then it has pressure could this be the clutch master cyl.

Posted by on

  • boomertjg May 14, 2009

    I keep checking the internet for other possible soultions before I spend time and money replacing things. Could it be posssible that the spring inside the master cylendar is broken?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,011 Answers

Yes it could be also check the fluid level!

Posted on May 14, 2009

  • mike loshbough
    mike loshbough May 17, 2009

    yes but the clutch master is not repairable ,it will come all together

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I can't depress the clutch pedal


Can't push clutch pedal in - JeepForum.com

www.jeepforum.com > ... > TJ Wrangler Technical Forum

Dec 11, 2010 - 7 posts - ‎3 authors
Driving home last night and the clutch pedal falls to the floor. ... Forums > TJWrangler Technical Forum > Can't push clutch pedal in ... Comes back up but then Ican't push it back in at all, even trying to stand on it, won't budge. Clutch locking up?
10 posts
Jul 30, 2011
Clutch Pedal Frozen Need tech help
10 posts
Sep 8, 2009
Clutch pedal stuck in the up position.
6 posts
Jul 26, 2009
Any more to clutch adjustment?
10 posts
Nov 28, 2008
More results from www.jeepforum.com

1998 Wrangler Sahara - Won't go into gear! Help please! - Jeep ...

www.wranglerforum.com/.../1998-wrangler-sahara-wont-go-into-gear-h...

Oct 5, 2010 - 22 posts - ‎7 authors
With the engine off, i can push the clutch in, and shift through all the gears ... to move - the clutch isn't disengaged even with the pedal fully depressed. .... Also, trying to bleed the system, can't find the bleeder screw. .... 1991 Jeep Wrangler Stuck In Gear? jeffasel, YJ Tech Forum, 5, 10-19-2010 09:42 AM. Getting difficult to push clutch pedal down, HELP
20 posts
Jun 17, 2011
How to bleed my clutch Be spacific.
11 posts
Feb 26, 2011
Clutch Problem?
30 posts
Jun 22, 2010
My Clutch Problems and How I Resolved Them
8 posts
Jan 28, 2009
More results from www.wranglerforum.com

Jan 13, 2016 | 1991 Jeep Wrangler

1 Answer

I have a 1989 jeep wrangler. yesterday, after the stick shift felt stiff to shift, the clutch felt suddenly loose. Today, the stick shift stopped moving completely while i was driving. Finally, I was able...


Sounds like you are having a clutch problem. The sudden looseness in the clutch pedal indicates a problem with either the hydralic system, (slave or master or line) leaking or clutch pressure plate going out. Check your clutch fluid resevoir first, if low look for a leak under the vehicle, have a friend push the clutch and get underneath to find leak.

Jan 10, 2010 | 1989 Jeep Wrangler

1 Answer

Clutch Pedal Very Soft


Air in the system. The shave is between the engine and trans and even a small leak won't show up. Look in the rubber piece on trans with a light and see if you see any fluid. If you see any then the slave is starting to fail.

Aug 03, 2009 | 1997 Jeep Wrangler

2 Answers

The clutch in my 92 Jeep Wrangler suddenly stopped working.


pull the boot back on the master and see if it is wet do the same with the slave

Apr 25, 2009 | 1992 Jeep Wrangler

1 Answer

1998 jeep wrangler dont shift into 1st or reverse


I will bet it grinds when you try to engage first or reverse. When this happened on my car, I adjusted the clutch and it improved. You need about a half inch of free play when you first touch the pedal with your foot. If you have a slave cylinder, (hydraulic clutch). You may need to bleed the system. With air in the system, you can't get enough clutch to fully disengage the trans from the motor.(Clutch and pressure plate) It's like you only pushed down half way on the pedal. If it's not hydraulic, it should be adjusted with wrenches. If clutch is fine, It could be a loose shift linkage. It would seem extra sloppy when moving shifter, It would just not go in gear, with out the grinding.Hope this helps. lbreen

Apr 22, 2009 | 1999 Jeep Wrangler

1 Answer

1991 jeep wrangler sahara shifting promblems


Your clutch is not disengaging. If it a hydrolic clutch chk. the fluid in resavor, Or slave cyl. for the clutch is bad, Or it has got air in it and needs to be bleed. This is a clutch problem, nothing wrong with trans. If its a manual clutch linkage its an ajustment thing. My best guess if its hydrolic slave cyl. went bad, or resavor is out of fluid.

Feb 10, 2009 | 1991 Jeep Wrangler

2 Answers

1991 jeep wrangler not shifting into gear could this be clutch


I would first bleed the tranny lines, if that doesnt work then your tranny is out and need to get it replaced. FYI with Jeep Wranglers, It is better to get a new transmission then to rebuild them

Feb 09, 2009 | 1991 Jeep Wrangler

Not finding what you are looking for?
1991 Jeep Wrangler Logo

Related Topics:

385 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...