Question about 2000 Chevrolet Blazer

1 Answer

Locate turn signal flasher on 2000 blazer

Both turn signals don't work. I have checked fuses in dash board and under hood which are all ok. I am trying to locate the flasher now to replace but can't find it.

Posted by on

  • atwoodt May 14, 2009

    Ok, I will try this but can you at least tell me where the flasher is as I've already bought one and would like to try and replace it.
    Thank you,
    TA


×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,614 Answers

Hi there,

The turn signal module is switched in and out for left, right or turn. So if one of these functions work, it is most likely that your turn module is good but the switching is bad. Try jiggling the hazard switch while trying turn. This is a fairly common failure. ,

Let me know for further clarifications

Posted on May 14, 2009

  • micromaster
    micromaster May 14, 2009

    When the turn signal lever is depressed, no lights come on
    anywhere. Listen to the directional relay for a click while
    moving the turn signal lever. If there is no sound, disconnect
    the turn signal switch from the harness and check it. If any of
    the connections are open, replace the switch. Usually the switch
    has failed when the plastic around the riveted contacts appears
    to be burnt or melted. This can only be seen with the steering
    wheel removed.

  • micromaster
    micromaster May 14, 2009

    you mean the flasher switch??

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 Concorde turn signals don't work


Do your flashers work? If not it may be the flasher unit is bad. It is located under the dash on the drivers side on or near the fuse box. If the flashers work you may have a problem with the turn signal lever or the wiring connected to it.

Sep 11, 2012 | 2000 Chrysler Concorde

1 Answer

The brake lights work but the turn signals don't!! Have checked the fuses and bulbs, but not finding the problem


Fuses and bulbs OK, but wires? Additionally I suggest keep in mind that turn signals work with FLASHER devices (two independent) on 1993 Buick Skylark..

Application: Turn signal
Flasher is located: Front seating area, driver side, under dash, driver side of steering column, mounted on support bracket

Application: Hazard flasher
Flasher is located: Front seating area, driver side, under dash, above kick panel, mounted in top of convenience panel

Hope this helps (remember to rate and comment this answer).

May 14, 2011 | 1993 Buick Skylark

2 Answers

I have a Frontier XE 2001. Niether turn signal works have good bulbs and fuses are OK. Where else should I look.


did both signal lights stop working at the same time or not,it may just be the signal flasher has gone bad,it is located under the dash by the fuse panel.if the hazard flashers work then i would say the signal flasher is bad.with the hazards on you can locate it and that is what the signal flasher looks like and it is a separate flasher,

Mar 31, 2011 | 2000 Nissan Frontier

1 Answer

Turn signal dosent work


you need to check to see which bulbs don`t work both front and back lights for the signal on the side it`s not working,you don`t say if any signals work or not if no signals work then you need to check the fuses under the dash on the driver`s side.now if it`s just one side then check the lights as mentioned above.if one isn`t then replace the bulb.if neither bulb is working then it sounds like the signal flasher is not working.turn on the hazard flashers and check the lights front and back.if all bulbs work then leave the hazards on and look under the dash for the flasher that is making the noise,this will show what the signal flasher will look like,then find the signal flasher on the fuse panel under the dash it should be located on the fuse panel.and replace

Mar 15, 2011 | 1997 Dodge Ram 1500 Club Cab

3 Answers

I have a 2000 ford explorer and both my 4 way flashers and turn signals are not working


check the fuses and both flasher cans,if not working then,u need to check the blinker switch

Dec 23, 2010 | 2000 Ford Explorer

2 Answers

Turn signals don't blink


Its a fuse or your turn signal switch on your steering wheel. Take to mechanic. Hope this helps!?

Apr 12, 2010 | 2000 Chevrolet Blazer

1 Answer

I have a 1997 chevy blazer the hazards work fine but the turn signal is not working I checked the fuse in the fuse panel. what else could it be


Replace the Turn Signal Flasher Relay. It has 2 relays. One for the Hazard lights and one for the Turn Signals. The Turn Signal Flasher Relay is located Front seating area, driver side, passenger side of steering column, under dash, mounted near cigarette lighter. Optional mounting location is under dash, on driver side of steering column. (Curtorsey Auto Zone)

Dec 15, 2009 | 1997 Chevrolet Blazer

1 Answer

My turn signals and flashers do not work


under the dash near the steering column will be a unit called the electronic flasher module (don't know exact location as it varies, but it will be labeled). It sounds like the unit has gone bad

Sep 11, 2009 | 1994 Chevrolet S-10 Blazer

2 Answers

No brake lights, turn signals, or 4-ways.


Did you actually check the bulbs? I believe your brake lights, signal lights, hazards all use the same bulb for each side.

Your brake lights may be your brake switch just above your brake pedal.
The signals could be your electronic flasher module (EFM) located under the dash near the steering column.
Your hazards may be affected by the EFM, but not likely and the switch for your hazards may be faulty

Sep 10, 2009 | 1998 Chevrolet Blazer

1 Answer

Flashers / hazard dont work.....


if i remember right it is under the dash by the stereo console.thanks for using fixya!

Sep 05, 2008 | 1998 Honda Accord

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...