Question about 1989 Nissan Maxima

2 Answers

Blowere fan does not work all the time.

Is there a fuse for the blower fan ? The fan works off and on .

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 54 Answers

No there is only the one fuse but there is a blower relay it should be located in the fuse/relay box either under the bonnet or under the dash near the fuses there are fuses and relays in both locations so read the covers it should say blower relay, that is your problem, when the relay heats after working for some time it shorts out and cuts the blower fan. try this website to find a replacement(they are a specific relay)

www.autopartswarehouse.com/mmp/nissan~maxima~blower_relay~parts.html

i hope i have been of some assistance.


Posted on May 14, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 103 Answers

It wouldn't be a fuse that would cause this. If the fuse was blown it would never work. It could be a relay that is bad and warming up or it could be a loose wire.

Posted on May 14, 2009

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 11 Answers

SOURCE: 1995 nissan maxima heater blower is not working

Check Fuse No.2 - 15A
Check Fuse No.3 - 15A
Check Fuse No.16 - 7.5A

Hope this helps.

Posted on Nov 22, 2008

SOURCE: 2003 Nissan Pathfinder blower motor will not work.

i need to find my blower resister in a 2003 pathfinder

Posted on Dec 01, 2011

richardxford
  • 4 Answers

SOURCE: Blower is working on position 4 (max) only

It could be the blower resistor unit,FSU. amazon has them for about 30 bux. This is located under the glove box, passenger side. No need to disassemble the glove box everything is accessible. You will need an 8mm socket to remove the 2 screws to the unit. Once unscrewed pull the cable from it and plug the new one it, pop that ****** back in and if that does not work, it is either the switch or the blower motor. The switch is cheap the blower motor is not cheap or easy to fix.

Posted on Sep 06, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Repair of A/C and heater fan not working


1998 JK jeep , ive posted these tests and the free FSM book here, 100s of time.s
search much?
its the heater blower. failing.
DOES IT BLOW ON HIGH?????????? this is #1 important.
and like all such blowers, it can fail for all these ways.
even a loose wire.
1: fuse blown, (always first, for the end of time)
2: controls bad.
3: blower bad.
4: wire to any of the above, bad. (not conducting or shorted)
all cars,. some newer cars a computer runs this but is #2




the book is free.
98jx
click (spoon fed) JK 96+
click wiring
click 8w2-1 index. then see heater. blower.
blower is page 8w42 in the real fsm
what does it show.?
JB25 fuse not blown? (answring for fan dead no high)
Relay works>? tests, like all relays we test. sop
gas engine?
Fuse PDC6 not blown if diesel PDC 11
on HIGH the lever blower , on high grounds the motor blower
if the relay has power to blower 12v pin A ,dark green
then the blower motor is bad.
it only takes a $10 walfart meter to find cause.
12vdc across the blower pins on high is goal.

here is the free book, and is REAL not some PoS clone RAG.
http://www.morris4x4center.com/knowledge-base/index.htm?utm_source=cj#service

Sep 26, 2016 | 1998 Jeep Cherokee 4WD

1 Answer

How to trouble shoot front blower


There are several reasons for a blower to stop working. Does it work on ANY speed? Does the AC compressor lamp or any of the vent control LEDs still work when using the AC controls? Do ANY of the speed for the blower work or are they all dead?

1st, you wanna check your fuses. There will be fuses in the underhood fusebox marked blower or heater fan, check and repalce as necessary. Also, if the earlier check for working LED bulbs on the AC control panel showed some or all lights dont ever turn on when engine is running, you may have problems with the control system.
if the fuses are good, now you need to test parts. there is a blower motor speed control aka blower resistor that frequently fails on most cars. It is the part that carries the current for all speeds of the blower and regulates speed when commanded. It has to absorb the excess energy to lower speeds and it tends to get very hot and burn out as a result. If it has failed, there will be power IN on one of its wires, and no power OUT on any others. If you have no multimeter or testlight to check things like this, Id recommend taking it to a certified mechanic.
If the control lamps all work that means controls have power, if the blower resistor has no power, fuses or blower relay are the most likely cause. if the blower resistor has power but still no fan, most likely your fan has failed. as a general rule, I replace fans and blower resistors as pairs. fans tend to last longer, but they also get more demanding with age (kinda like people) and that extra demand will burn out the newer resistor much faster than when the fan was newer. it can be alot of time and money to change a blower TWICE, so to be sure it wont fail again, test current, or simply replace the blower fan if it is determined a resistor has failed. (a good fan in theory shouldnt draw enough amperage to burn out a good resistor, EVER, so if the resistor burns, the fan is typically drawing too much power, and even though it works "fine", it will burn the next resistor in a short time as well.).

Feb 24, 2015 | 2005 Dodge Caravan

1 Answer

Ford f150 xlt, blower fan won't blow ac into cab of truck can feel cold air when on highway. But fan not working. Help?


Check to see if the blower works with the heater on. Turn the control to heat and see if the fan works. First check the fuse for the blower. If the fuse is good and the blower does not work with heat on , the blower may be bad or the speed resistor maybe bad.

May 21, 2014 | Cars & Trucks

2 Answers

Heater fan not working


Smack it and see if it comes on. If it does then the motor brushes are bad. If it does not come on, check the fuses. If the fuses are ok, check the voltage on the plug to the motor.

Feb 06, 2014 | 2001 Dodge Durango

1 Answer

Blower fan on 06 Silverado doesn't work at any speed, fuse O.K.


check the blower relay if ok
check the blower moter for power and that it works
then the last check out the fan switch

Oct 31, 2012 | Chevrolet Cars & Trucks

1 Answer

2004 grand marquis fan quit working..replaced fan but still wont work


is this the blower motor fan for you heating and A/C or the cooling fan cooling fans have a relay blower fans are fused but controlled from switches inside as well as fuses

Aug 27, 2012 | 2004 Mercury Grand Marquis

1 Answer

Blower fan inop intermittent


Could be the blower motor resister is going bad or the a.c. fuse came loose,next time it happens,check fuse,pull out and reinstall.

Aug 22, 2012 | 2007 Buick LaCrosse CXL Sedan

1 Answer

Gmc 2500 truck work blower does not work at all


Check your fuses for the blower motor. If they are ok, it is probably the blower fan resistor which is located on or next to the blower fan assembly under the passenger side dash in the footwell. if resistor is bad, there will be no fan speeds. make sure you are getting power to fan motor, if power but fan does not work then its the fan. check fuses and fan resistor first. good-day !

Sep 28, 2011 | Cars & Trucks

2 Answers

Heater blower stopped working?


Hello,
You may want to try your fan on all speeds. If it will work on high, you have a bad resistor for the fan motor. ( high speed doesn't go through the resistor ).
If it doesn't work on any speed, I would check the following;
1. Make sure the fuse isn't blown for the fan blower motor.
2. Check, or have checked the wires between the fan control switch and the fan blower motor.
3. Have the fan control switch checked.
4. Have the fan blower motor checked.

I hope this helps you.

Feb 03, 2011 | 2002 Buick Rendezvous

Not finding what you are looking for?
Cars & Trucks Logo

481 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...