Question about 1996 Chrysler Town & Country

Open Question

On a 1996 chrysler town and country lxi 3.8 how do you adjust the accelerator and cruise control cables

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75005 Answers

SOURCE: where is the body control module located on a 1997 town & country

It is located on the back side of the underdash fuse box (junction block). You remove the lower steering column cover and knee blocker reinforcement. Then remove two plugs from the bottom of the BCM.
Remove the bolts holding the junction block to dash panel mounting bracket. Remove the junction block from the bracket. Remove screws holding the BCM to the junction block. Slide the BCM downward to disengage guide studs on jb from channels on BCM mounting bracket

Posted on Mar 23, 2009

  • 1986 Answers

SOURCE: need the location of the fuel filter fora 1996

It will either be inside the gas tank (real pain) or it'll be in front of the gas tank recessed into the frame.

Posted on Aug 25, 2009

wracefans24
  • 1985 Answers

SOURCE: tach and speedometer not working in 2003 chrysler

http://www.edmunds.com/chrysler/townandcountry/2005/discussion.2.html

Posted on Jan 22, 2010

  • 1 Answer

SOURCE: On my 1997 Chrysler Town & Country , my Horn

This is definitely an issue with your clockspring. The clockspring is a device in the steering column that provides electrical contacts for horn, cruise and airbag. The good news for you is this part is covered under a Chrysler warrantee / recall.

Posted on Feb 17, 2010

  • 17 Answers

SOURCE: 2005 Chrysler Town & Country. Passenger side window problem.

HAVEK 1005 sounds right on track.... but also try this, usually works well for non functional power windows, specially Caravans.

NO COST PROCEDURE TO FIX IT:

1. Sit in vehicle, on seat next to problematic window
2. Ignition key is on
3. Door in question is opened (in case you closed it)
4. While door is open, press and hold power window button in desired window travel, keep button pressed !!
5. SLAM hard the door closed with one hand while other hand holds button as per #4.
6. Watch window operate as it should.
7. Repeat 3-6 if necessary, but usually the first try works!

NOW, for the naysayers that says you must replace power window motors etc, at $$$ cost because the above fix does not work, or is not long lasting fix, or less than a "professional fix".... Well then, when the window fails to operate again, apply same fix again at that time.

I have fixed my van this way numerous times (usually once a year), and to all local friends I recommend this fix too, likewise do the same and are happy with the solution.

Posted on Jul 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My speedommeter doesn't work but my cruise control does. Is it cable driven or electric?


Your speedometer is most likely electric (magnet) drive off of either your drive shaft or a wheel sensor. You cruise control is cable driven by a solenoid that adjusts the cable and throttle body like it would if you were pushing or releasing the gas.

Sep 06, 2011 | 2001 Chrysler Town & Country

1 Answer

I have a 98 town & country lxi chrysler. The cruise light on the dash comes on, but it won't set....what is wrong?


possible broken vacuum hose or cruise control module connections are loose, dirty, corroded, or wires could be broken.

Mar 18, 2010 | Chrysler Town & Country Cars & Trucks

1 Answer

Airbags and ABS lights are on, A/C and Turn signals do not work


I would take to a reputable mechanic to have a diagnostic performed. Sounds like you have a serious electrical problem.

Dec 14, 2009 | 1996 Chrysler Town & Country

1 Answer

2001 Town and Country Cruise Control won't engage


Check your vacuum lines. Most of the time it is the vacuum lines, or the cruise actuator. I have seen a couple of brake switches not allow the cruise to set also. If it feels like it sets, then loses speed, it is a vacuum/actuator problem. If it is not setting at all, it could be either the brake switch, or the actuator.

Jul 30, 2009 | 1996 Chrysler Town & Country

1 Answer

My Chrysler Town and Country Mini- Van won't stay started


Did you try inserting the key in the drivers side door and locking and unlocking it manually several times to reset the alarm system. This was the problem with my 1996 Chrysler Town & Country LXI

Sep 28, 2008 | 2002 Chrysler Town & Country

Not finding what you are looking for?
1996 Chrysler Town & Country Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...