Question about 1988 Toyota Pickup

1 Answer

Ticking when the accelerator is pressed

I have a 1989 toyota P/U SR5 4x4 with a 3.0 v6.
when i crank up the truck its fine but as soon as i put it in gear it starts ticking when i start to let the clutch go. but when i push the clutch in the ticking stops. the harder i hit the throttle the louder the ticking gets. what can i do to get it to stop?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 145 Answers

It may sound like the clutch but this problem has nothing to do with the clutch. these motors are notorious with machinists. The oiling system is lousy, you are most likely throwing rod #6 in the motor.
as the machinist up the street from me has noted that everyone that he has done was rod #6 being thrown.

Posted on May 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The truck is a 1994 toyota 4 wheel drive with a 5 speed and a v6..it cranks fine..idles fine...but when I try and accelerate the engine begins to stumble as if the cat converter is stopped up..Ive alr


A blockage in the exhaust would limit top speed but not power off idle.
Sounds like lack of fuel, either because of a sensor or low fuel pressure. Or a vac leak.

Jan 25, 2013 | Cars & Trucks

1 Answer

I have a 2001 honda civic if i try to start it without pressing the gas pedal which seems to be sticking it will not crank it makes no noise whatsoever


Low fuel pressure or problem with spark plugs or crank sensor is got dirty and needs cleaning or its time to replace crank sensor.


Check out the help links shown below for no start problem and cranks but no start problem.


Click the link :-----

It can be the issue with weak battery or faulty battery or if battery is ok,then its faulty starter causing the issue.


From start to end troubleshooting these problem i suggest you to click the link below and follow its procedure:-----



What to Do When Car Turns Over But Won't Start?

http://technoanswers.blogspot.com/2012/11/what-to-do-when-car-turns-over-but-wont.html


-----------
Car starting issues?

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

------------
Car Starting Problems

http://whoisbyme.blogspot.in/2012/06/car-starting-problems.html


--------
1991 Toyota Trecel: Engine Starts fine but dies when gets Warm?

http://whatisbyme.blogspot.in/2012/05/1991-toyota-trecel-engine-starts-fine.html

----------
1994 Toyota Pickup: Starts fine but dies in few seconds?

http://howtobyme.blogspot.in/2012/05/1994-toyota-pickup-starts-fine-but-dies.html


---------
1999 Chrysler Cirrus: 8 IGN Fuel Starter Fuse Blows?

http://whatisbyme.blogspot.in/2012/06/1999-chrysler-cirrus-8-ign-fuel-starter.html


-----------
2001 Toyota Camry: No start After replacing Battery?

http://whatisbyme.blogspot.in/2012/05/2001-toyota-camry-no-start-after.html

----------
1989 Toyota Pickup Truck: Turns over but not start? http://whatisbyme.blogspot.in/2012/05/1989-toyota-pickup-truck-turns-over-but.html

--------------
Car dead and will not Start? http://whatisbyme.blogspot.in/2012/05/car-dead-and-will-not-start.html

--------
1995 Lexus LS400: Running Hot?

http://whatisbyme.blogspot.in/2012/05/1995-lexus-ls400-running-hot.html


----------
2001 Toyota Prius will not start? http://whatisbyme.blogspot.in/2012/05/2001-toyota-prius-will-not-start.html

---------
1996 Jeep Grand Cherokee: Engine will not start? http://repairhelpcenter.blogspot.in/2012/06/1996-jeep-grand-cherokee-engine-will.html ------------- Mitsubishi will not start

http://www.howtorepairguide.com

---------

These will help.

Thanks.

Nov 25, 2012 | 2001 Honda Accord

1 Answer

My 1989 v6 toyota camry temperature gauge right to hot as soon as i turn the switch on


Probably a bad sending unit on the engine. Buy a new one and replace it.

Nov 24, 2012 | 1989 Toyota Camry

1 Answer

1990 Toyota PICK UP SR5 V6, when in gear and start releasing clutch pedal, truck starts moving forward with slight jerking. As soon as I give it gas, it starts to **** harder, forcing me to shift into 2nd...


Sounds like it is a clutch issue. Have the clutch plate checked or check the clutch and friction plates. I know it sounds strange but In reality we always press teh clutch all teh way in to shift. But going from 2nd to third you actually don't have to. Going from 3rd to 4th is even less of a distance. It may be a problem between the clutch and friction plates depending on when you last had them changed and adjusted.

Jun 28, 2010 | 1990 Toyota Pickup

1 Answer

Loss of power during acceleration in 1989 toyota camry v6 with dash board indicating check light


The "check engine" warning light advises that the vehicle is in "fail safe" mode. That means only some of the car's capabilities are operational, just enough to get you to the nearest service point. You probably should not drive it any further than that. Have your service man download and analize the fault codes from the ECM which will indicate what the problem is.

Apr 09, 2010 | 1992 Toyota Camry V6

1 Answer

I have a 1992 toyota camry v6, and it was running fine, then all of a sudden it started shaking when i brake, and when i accelerate, it shakes less, and now the engine light turned on. any ideas what it...


Sounds like you may have a vacuum leak. In order to find the leak listen around the engine for a hissing noise. Make sure there is no hissing when you press on the brake

Oct 29, 2009 | 1992 Toyota Camry V6

2 Answers

1998 Tacoma V6 (Pre-runner) dies when key is released


I BELIEVE they have A BALLAST RESISTOR Close to the COIL that Will Cause this if they FAIL

Aug 12, 2009 | 1998 Toyota Tacoma

1 Answer

1993 toyota camry power light in dash on


The PWR light is controlled by a switch located near the shifter...when you press it down, it turns on that light in the instrument cluster...when the PWR is on, you will have faster acceleration while taking off from a standstill

Apr 07, 2009 | 1993 Toyota Camry V6

1 Answer

I have a 1989 Toyota pick up 2wd that keeps blowing the 15A EFI fuse. I can crank it up and it will run iddle fine but once i put it in drive and press the gas peddle it blows the fuse. Any idea?


check the wires along you engine see if any have a bare spot or rubbing the throttle cable, sounds like you have a short also check to see if any wire along your fuel injection on the engine have a bare spot or shorted look closly and slowly for the rubber shielding to be chaffed or missing remember the wires once shorted could have turned black so dont just look for copper color inspect very closely with a flash light.

Jul 03, 2008 | 1989 Toyota 4Runner

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...