Question about 2000 Oldsmobile Alero
There will be a few screws holding door trim panel along with some plastic clips..look for smaller trim pieces which may be hiding screws..once all screws are removed,try using flat bladed tool to pry out on panel..can purchase this at local parts store..you may have to lift up on trim panel after removing all clips to get panel to come out at top near window glass
Posted on May 14, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: passenger door window off track
Here is a guide for taking the door panel off and replacing the window regulator. It is for a grand am but I assume it's pretty close.
Posted on Sep 22, 2008
SOURCE: 2000 oldsmobile alero gl 2.4
The window regulator is what causes the plastic clip to break. I had the same problem. I was able to find a new clip at advanve auto parts, and had to purchase a regulator which includes the motor from ebay. There were many diffrent options out there. Total cost was about $60.
Posted on Feb 17, 2009
Your window crank is held on by a clip at the base of the crank handle. You need a small hook (kind of like a knitting needle) to get behind the base and pull the clip off of the crank.
I hope this helps you, and I wish you luck on your repair.
Posted on May 13, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.
Posted on Sep 15, 2009
SOURCE: front door panel removal
There is a triangular piece, at top corner, covering a screw behind the mirror. Remove that screw. Remove the piece that covers the handle and remove the screw holding the handle to the door. Look through, where door handle was and remove another screw just above where the handle was. This screw is holding the panel to the actual door. Pop the cover off for the automatic door locks and disconnect them. Lift the panel in an upward direction.
Posted on Nov 14, 2009
Tips for a great answer:
May 30, 2014 | 2000 Oldsmobile Alero
Jul 29, 2010 | 2004 Oldsmobile Alero
May 09, 2010 | 2000 Oldsmobile Alero
Jan 31, 2010 | 2002 Oldsmobile Alero
Sep 24, 2009 | 2000 Oldsmobile Alero
Aug 29, 2009 | 1999 Oldsmobile Alero
May 23, 2009 | 2000 Oldsmobile Alero
Feb 25, 2009 | 2000 Oldsmobile Alero
Oct 24, 2008 | 2003 Oldsmobile Alero
740 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: