Question about 1994 Chevrolet Corvette

1 Answer

94 vette won't start,bat good,have org. key,fuses ok,high beam light on lights off,lcd cluster won't light up?

I have a 94 vette. it won,t start. it has a good battery. all fuses are good. i have the origanal key. the security light won,t come on. the LCD won,t come on. the high beam light is on with the lights off. can you help me. thank you,ernie.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Disconect the battery and ECM for FOUR DAYS then reconect the ECM and BATTERY. Let it sit for another four days without turning anything on. It should start but will run rough for about 200 miles as the ECM relearns the system. I had the same issue and that is what fixed it.

Posted on Dec 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Temp gage gas gage dashlights don't work


Check all your fuses make sure they're good. This can also come from bad ignition switch or ignition switch going out

Mar 05, 2016 | 1993 Geo Metro

1 Answer

97 Jeep Wrangler 4 cyl. Turn signals, headlights, parking lights, tail and brake lights, and instrument panel are all out. Only interior light above brake pedal is working. Engine will start.


i think you ment IP cluster backlights dead not warning ligts
that is real the huge parking light structures.
a blown fuse. it is, why not test them ? first.

either cab fuse or the engine bay fuse box.
12vdc on both sides of fuse, is a good fuse, key on.
100% accurate test. no guessing. ever with voltmeter.
(rare exceptions a car with a ground fuse, very rare)
so lets do this the hard way, no fuse tests......

but hark the fsm is free. why not just look at the road map er, schematic, (wiring diagrams)
lets do HL , they are hot all the time, keys lost .

your car is a TJ so having a TJ book is spiffy , no? KEEN?
lets do that. TJ wiring
click TJ
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

now click wiring, following me?
posted this 100 times,., here.

my guess is parks are dead High beams good, right, ?????
yes then go to JUMP 1.
HL dead highs and low beam? parks out.(aka TAIL)
PDF page # 92
fuse PDC #17 blown? kills cluster dead too
JUMP1: parks dead.
had lamps is fuse #1, jb (page 134 pdf)
then PDC fuse 4 and 10 (lows and highs)

PDC is engine bay box.
JB is cab box.

so my guess (hard way)
fuse 10 and CB 24 was blown. kills high/low beams
Fues1 and 4 only parks. and cluster dimmer feed.

page 134 makes all this childs play with a meter.
volt meter.

Feb 22, 2015 | Jeep Cars & Trucks

1 Answer

Fuse #? for cluster lights on 94 Olds Cutlass Supreme


Two years ago I purchased an 05 Lesabre and the cluster lights on my dash all went out and the dealer said he thought it was a fuse. Fuses were ok. My battery was shot and he said because it was making the alternator charge at a high charge all the time it burnt out all my cluster lights. He replaced the battery and the cluster lights as well.

Nov 30, 2014 | Oldsmobile Cutlass Supreme Cars & Trucks

1 Answer

The lights for my speedo, clock, temp gauge and fuel gauge not working, indicators, main beam, high beam, oddometer, handbrake, foglight all working ok?


You should have a fuse in the fusebox for the instrument cluster. The instrument cluster houses your gauges, speedometer, clock, and temperature gauge or light. Check the fuse to see if it blown and replace with the same size number on the fuse. Don't decrease or increase the number of the fuse. Stay with the same amp number that is on the old fuse when you replace it. Hope this helps.Good luck.

Mar 07, 2014 | Cars & Trucks

1 Answer

Dash lights are not working at night. Where is the bulb?


ethere dimer suitch is bad or bulb on cluster you have to remove the cluster there on back of cluster hope this helps

Nov 27, 2012 | 1996 Chevrolet S-10 Pickup

1 Answer

Where is the placemnt in the fusebox for the fuse for high beam lights on a ford e-350 for van


usually the headlights have a relay in a fuse box under the hood. is it just the high beams that don't work. have you tried a new bulb. sometimes they look ok but do not work. also do you hear the switch click when turning them on and is there an indicator coming on in the instrument cluster? good luck

May 13, 2010 | 2002 Ford E350

2 Answers

High beams work but not the low beam lights


check relay!!!!!!!!!!!!!under hood in relay//fuse cluster,cheers

Dec 23, 2009 | 2006 Dodge Ram 2500

1 Answer

I have a 1996 chevy 3500 p/u. No high beams or indicator light.


You dimmer switch needs replaced inside the stering column.

Sep 14, 2009 | Chevrolet 3500 Cars & Trucks

1 Answer

Main fuses for the horn and air bag


Fuse #8, #18 and #22.

Below is a listing of which fuse corresponds with which circuit:

1 - 10 Amp - Transmission Controller, Gauges, Autostick
2 - 10 Amp - Right High Beam Headlight
3 - 10 Amp - Left High Beam Headlight
4 - 10 Amp - Radio, CD Player
5 - 10 Amp - Washer Motor
6 - 15 Amp - Power Outlet
7 - 20 Amp - Tail, License, Parking, Illumination Lights, Instrument Cluster
8 - 10 Amp - Airbag
9 - 10 Amp - Turn Signal Lights, Turn Signal/Hazard Indicator
10 - 15 Amp - Right Low Beam
11 - 20 Amp - High Beam Relay, High Beam Indicator, High Beam Switch
12 - 15 Amp - Left Low Beam Headlight
13 - 10 Amp - Fuel Pump Relay, Power Train Control Module
14 - 10 Amp - Cluster, Day/Night Mirror,Sunroof, Overhead Console, Garage Door Opener, Body Control Module
15 - 10 Amp - Daytime Running Light Module (Canada)
16 - 20 Amp - Fog Light Indicator
17 - 10 Amp - ABS Control, Back Up Lights, Daytime Running Lights, A/C Heater Control Cavity Fuse Circuits
18 - 20 Amp - Power Amplifier, Horn
19 - 15 Amp - Overhead Console, Garage Door Opener, Trunk, Overhead, Rear Reading, and Visor Vanity Lights, Trunk Release Solenoid, Power Mirrors, Power Door Locks, Body Control Module, Aspirator Motor
20 - 20 Amp - Brake Lights
21 - 10 Amp - Leak Detection Pump, Low Rad Relay, High Rad Relay, A/C Clutch Relay
22 - 10 Amp - Airbag
23 - 30 Amp - Blower Motor, ATC Power Module
24 - 20 Amp - Power Window Motors
25 - 20 Amp - Power Door Lock Motors, Power Seats

Apr 02, 2009 | 2004 Dodge Intrepid

Not finding what you are looking for?
1994 Chevrolet Corvette Logo

Related Topics:

431 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...