Question about 2002 Toyota 4Runner

1 Answer

How to replace a fog lamp with replacement bulb only on 2002 toyota 4runner sport edition???? the three screws on the bottom?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 2,984 Answers

Well, these are the steps and I will post the pic here in a second...looks like 2 screws...but like I said, you can see the picture for direction on this.


Remove or disconnect the following:

Front turn signal lamp

  • Connector
  • 2 screws
  • 2 claw fittings
  • Fog lamp assembly
  • Fog lamp bulb as shown
  • Fog light unit

  • To Install
    1. Install or connect the following:
      • Fog light unit
      • Fog lamp bulb as shown
      • Fog lamp assembly latch the 2 claw fittings and 2 screws
      • Connector
      • Front turn signal lamp
    Trying to post the pics now....

    Posted on May 14, 2009

    ×

    1 Suggested Answer

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    goodluck!

    Posted on Jan 02, 2017

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    How do I replace fog light on 2002 isuzu sport


    bulb or whole thing
    we cant guess the symptoms
    not ever.

    Mar 08, 2015 | 2002 Isuzu Rodeo Sport

    1 Answer

    How do I replace the Drivers side fog lamp (not just bulb) on my 2002 Audi A4 18T?


    First remove the driver's side fog lamp plastic cover out from front bumper. After that you will find torx socket head panel screws from fog lamp. See picture below:

    de0b0fe.png

    Feb 06, 2010 | 2002 Audi A4

    1 Answer

    Fog Lamp Bulb Replacement


    there are a couple of screws in the front of the fog light that will remove the lense so you can replace the bulb.

    May 11, 2009 | 2004 Chrysler Sebring

    1 Answer

    How to Replace the Taillights in a ford sport track


    The Explorer Sport Trac changed for 2007 and I don't have that manual. Here's the instructions for a 2002 Sport Trac. It may be the same or similar. The idea is that the tail lamp has to be removed to get access to the bulb.

    First, lower the tailgate and look not at the lamp assembly, but rather at the truck body on the inside, where the tail gate would be when closed. When you do so, you will notice three small, round, rubber plugs which have a recessed center. One is up high, another in the middle, and the third at the bottom. Your attention will be drawn to the recessed center - you may be looking for a screw or some way to pop out the center. Instead, remove the entire plug from it's hole. You may need to carefully insert a flat-head screwdriver under the edge to pry it loose, but may be able to remove using only fingers. Once you have removed the plugs, you will see a screw. A 2002 had the type of screw that requires a small wrench rather than a screwdriver - your Explorer may use something else, but be prepared either way. Remove the three screws and the lamp assembly should come right off.
    Grasp the base (actually the socket) of the bulb, turn it about 1/4 turn (counterclockwise) and remove it from the lamp assembly. Then carefully pull the bulb straight out of the socket. Next insert the new bulb by first placing it into the socket and then returning the socket to the lamp assembly - don't forget to lock the socket into place by turning it about 1/4 turn (clockwise). Then return the lamp assembly to it's correct position on the truck and secure by replacing the three screws and pushing the rubber plugs back into place.

    Avoid touching the bulb glass with your fingers. The acid from your skin decreases bulb life. Good Luck!

    Apr 29, 2009 | Ford Explorer Sport Trac Cars & Trucks

    1 Answer

    Need to change fog light bulb in my 97 mitsubishi 3000gt and cant figure out how to help please


    Firstly remove undertray from front bumper approx 15-20 screws 2 of which are screwed into either side of the inner wheel arch near the bottom, you should then be able to see the back of the fog lamp. On the back of the fog lamp you will see a black circular shaped peice of plastic, turn this anti clockwise then remove, you will then see a metal clip holding the bulb in place this unclips from one side and you can then remove the bulb and replace with a new one.

    Mar 05, 2009 | 1997 Mitsubishi 3000GT

    1 Answer

    Fog light bulb replacement


    This bulb can be replaced without removing the washer fluid reservoir. There are 3 screws that go through the bottom edge of the bumper cover into the right inner fender guard. Remove these screws and pull the inner fender down to gain access to the back side of the fog lamp and remove the bulb.


    Nissan Scope Technician- 10+ years experience in Nissan dealership.

    Nov 04, 2008 | 2003 Nissan Murano

    1 Answer

    2002 Pontoiac Gran Prix 2002 GTP


    Yes, you can replace just the bulb. A local auto parts store may be able tell you which bulb you need or you'll have to pull the bulb out and take it in.

    Oct 18, 2008 | 2002 Pontiac Grand Prix

    2 Answers

    Changing fog light bulb


    I just replaced the fog light bulb on my 2008 Azera. I went under the car and removed two screws from the protective shield. I pulled down the shield and reached up and turned the fog light socket and pulled it out of the housing, remembering which side the wires were on and removed the old bulb (Don't touch the new bulb with your hand) and replaced it with the new bulb. The job took less then 15 minutes

    Aug 08, 2008 | 2002 Hyundai Santa Fe

    1 Answer

    2002 4Runner 4X tail light replacement


    Well I dont know bout a 2002. I have a 92 4runner and my bulbs are exterior and all you need is a phillips to unscrew the light. Then you can just pull the bulb and replace it.

    Aug 04, 2008 | 2002 Toyota 4Runner

    1 Answer

    HOW TO REPLACE HEADLIGHTS ON 2000 CHRYSLER LHS


    ATTN: NIKKICARROLL

    here is how to replace the bulb in your vehicle


    1. Release the hood latch and open the hood.
    2. Remove the radiator closure panel sight shield as necessary to gain access to the headlamp.
    3. Remove the screws holding the headlamp module halves together.
    4. Separate the module halves.
    5. Disengage the wiring from the headlamp bulb.
    6. Remove the retaining ring from the back of the headlamp bulb.
    7. Pull the bulb from the lamp.
    To install:
    1. Push the bulb into the lamp.
    2. Install the retaining ring to hold the bulb in the lamp.
    3. Engage the wire connector to the back of the headlamp bulb.
    4. Place the module into position on the vehicle.
    5. Install the screws to hold the module to the vehicle.
    6. Install the radiator closure panel sight shield.
    7. Check the headlamp alignment and operation.
    88176gb1.gif Exploded view of the fog lamp with the bulb removed
    Click to Enlarge

    1. Release the hood latch and open the hood.
    2. Remove the radiator closure panel sight shield as needed to gain access to the headlamps.
    3. Remove the screws holding the headlamp module halves together.
    4. Separate the halves.
    5. Remove the fog lamp wire connector cover.
    6. Disconnect the wires from the fog lamp bulb.
    7. Disengage the retainer clip holding the bulb to the fog lamp.
    8. Remove the bulb from the fog lamp.
    To install:
    1. Place the bulb into position in the fog lamp.
    2. Engage the retainer clip to hold the bulb to the fog lamp assembly.
    3. Attach the wire connectors to the fog lamp bulb.
    4. Install the fog lamp wires connector cover.
    5. Place the module halves together.
    6. Install the screws to hold the headlamp module halves together.
    7. Install the radiator closure panel sight shield.
    8. Verify the fog lamp operation and alignment

    ATTN: WDSNEED1

    Removal & Installation 88176g87.gif Remove the screws retaining the headlamp module to the mount adapter
    Click to Enlarge

    1. Release the hood latch and open the hood.
    2. Remove the radiator closure panel sight shield as necessary to gain access to the headlamp fasteners.
    3. Remove the screws holding the headlamp module to the mount adapter.
    4. Separate the headlamp module from the mount adapter.
    5. Disengage the wiring from the headlamp and foglamp.
    6. Remove the headlamp from the vehicle.
    To install:
    1. Attach the wires to the headlamp and foglamp assembly.
    2. Place the headlamp module into position on the mount adapter.
    3. Install the screws to hold the headlamp module to the mount adapter.
    4. Install the radiator closure panel sight shield.
    5. Check the headlamp alignment and operation.

    Jul 28, 2008 | 1994 Chrysler New Yorker

    Not finding what you are looking for?
    2002 Toyota 4Runner Logo

    785 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    75117 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7772 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...