Question about Buick Skylark

1 Answer

No brake lights

My turn singles work, brake light switch is ok
.but I have no brake lights any ideas.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

If all three lights are out I'm pretty sure it is the fuse that is blown. Open the fuse box and there will be a diagram of which fuse controls the brake lights. When you locate the fuse pull it straight out. If it is bad you will see a gap in the conductor. You can get replacement fuses at any parts store or even Walmart. Just get one with the same rating - probably 15 amp.

Posted on May 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Chevy Cavalier no brake lights but turn signals/hazards/backups work just fine. any ideas?


WHEN YOU APPLY BRAKE PEDAL, do you see brake lights come on ? if no then the switch is not working fine ! switch turns lights on when you depress the pedal, releasing the plunger, lights go out when you release the pedal. this switch has a fuse @ fuse block. check it ! if ok, and brake lights do
not come on replace switch, & mount properly in bracket.

Mar 08, 2013 | 2001 Chevrolet Cavalier

1 Answer

No brake lights, blubs and fuses ok. center brake light DOES work


Usually when the third brake light works but the regular lights don't the problem is in the turn signal switch.
I would check for voltage there.

Jul 19, 2012 | 2004 Jeep Grand Cherokee

2 Answers

Would a bad Flasher relay cause the brake lights not to work?


The flasher does not stop the brake lights from working. Check # 18 fuse in fusebox under lower left side of dash. if it's ok, the brake light switch, on the brake pedal arm is next. light green wire with red stripe is hot if fuse 18 is ok. Depress brake pedal, light green with no stripe should have power. if not, replace brake light switch. If light green wire has power with pedal depressed, combination switch under the steering is next. Remove the cover from around the combo switch {under the steering wheel}. depress brake pedal, light green wire should have power. If it does, pedal still depressed, orange with light blue wire & wire with light green & orange should have power. Those 2 wires are brake & rear turn signal wires. { The turn signal switch should be in the middle, not right position or left. while checking for power in the last 2 wires. Good Luck drvolt.

Feb 06, 2011 | 2004 Ford F250

1 Answer

85 chevy 3/4 ton pick up .Rear brake light and turn singles dont work but parking lights work,fuse is ok brake switch is ok and front turn singles work as well as hazerds for the front only work and...


bad turn signal switch broken inside switch, need to remove steering wheel, remove clip, unplug connector under dash on column, undo the 3 screws hold switch in, install in reverse order.

Feb 11, 2010 | 1985 Chevrolet Chevy

1 Answer

REAR BRAKE LIGHTS DO NOT COME ONLY TAP LIGHT IS


Check for power at the turn signal switch. White wire comes from brake switch switch into the turn signal switch. The brake light switch is working because the high mount brake light is working..right? Do the turn signals work ok? if so, then the wiring is OK. The brake signal wires that come out of the turn signal switch are dark green(right) and yellow (left).

Oct 27, 2009 | 2001 GMC Safari

3 Answers

NO Brake lights. Fusses OK, replaced brake light


It could be a relay.. Find the location in your manual..

Have a great day !

Oct 24, 2009 | 2001 Mercedes-Benz C-Class

1 Answer

99 Rodeo Right turn signal makes brake lights blink


TURN SIGNALS WILL FEED BACK THROUGH THE TURN SIGNAL SWITCH.THEY ARE INDEPENDENT OUT SIDE ON THE CAR BUT NOT IN THE SIGNAL SWITCH.REPLACE THE SIGNAL SWITCH

Jan 02, 2009 | 1999 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...