Question about 1993 Honda Civic 4 Door

1 Answer

B16A Engine I'm just wanting to know, yes or no if you can fit any of JDM's B16 motors in a 1993 Honda Civic si Hatchback that has a 1.6L SOHC 4-cylinder VTEC. Can I fit a B16A or B16C JDM Engine?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Ya but the motor mount might need to moved or changed

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No spark


Yes. No crank sensor signal usually means no spark. The ecu has to receive crank position to set spark timing. I think you've really hit a big problem. You may need to get in touch with some people who have done this mod. I've always heard it's best and easiest to swap the engine with its ecu and the wiring harness into another car. Or something more compatible with that jdm engine.

Jul 27, 2012 | Honda Civic Coupe

Tip

How to install a subwoofer and amplifier


When installing any electrical components always remember to unhook the battery. First thing you want to do is run your ground cable from a volt meter to a body or frame nut or bolt near by in the trunk or hatch area a shorter thicker ground is best then connect the other end of your volt meter to your battery cable that will need to be run through the firewall and connect to the positive battery terminal. Also VERY important make sure you have installed a fuse on the wire in between the amp and the battery. after you have connected the battery cable and ground to your meter it will light up or give you the correct reading for your ground, if not run the ground somewhere else until you have found the right spot. pull out your stereo, for stereos that are made to be compatible with an amp there will be multiple rca jacks in the back of the stereo. For a sub woofer you want to hook the rca cable to the rear or sub labeled rca jacks. Then run your amplifier remote wire to the remote wire protruding from the back of your car stereo. After that you can run the ground and battery cable to the correct slots. Now connect your sub via rca and your done. making it fit correctly is up to you. If you do not have an amp with a subwoofer out then you can take the wires from your sub and bridge the connection to your amp and get enough power, take the positive wire to your sub and hook it up to the positive terminal of channel one on the amp then take the negative wire from your sub and hook it into the negative terminal on channel two and your done.


























keywords: subwoofer, fuse, wiring, car audio, car , car audio install, speakers, dvd player, in dash, acura integra gsr del sol honda civic itr ls b16 hatch coupe jdmkey words: honda acura integra gsr itr jdm del sol coupe hatch ls si boosthonda, acura, civic, crx, si, hx, two door, integra, DA, EF, EG, EK, DC, DC2, DC4, hatchback, four door, GSR, LS, GS, RS, EX, DX, VX, engine, transmission, VTEC, V-TEC, non-VTEC, B18, B18A, B18B, B18A1, B18B1, B16, B16A, B16A2, B18C, B18C1, B18C5, D16, D15,key words:VTEC, V-TEC, non-VTEC, B18, B18A, B18B, B18A1, B18B1, B16, B16A, B16A2, B18C, B18C1, B18C5, D16, D15, integra civic, b18, turbo spoon,JDM,EK9,da6,eg,civic,HB,honda,acura,turbo, acura Honda Civic Integra EG6 EK9 EK4 DB8 DC4 ITR CTR civic honda jdm integra ls gsr b16 b18 civic si crx k20 swap hatch coupe lx eg ek ef b20 accord prelude sedan trade sir type-r lsd b18c5 b18c1 turbo supercharger b-series integra da dc eg ek ex gs rs ls gsr lsr rs si sir sirg wanted prelude accord transmission eg ef ek em ep civic integra del sol s2000 s2k rsx accord gsr type r itr ctr vtec v tec honda acura blades ls mesh rota volk 4 lug 5 lug b16 b18 h22 h23 b20 k20 d16 d15 b series h series d series turbo all motor eg ek da ef crx dc2 dc5 dc em ej ap1 f20 prelude jdm edm ukdm doch b18a b18 b18c1 b18c5 rota rsx integra DA ef eg ek hx rims si rims gsr blades ls distributer distributor rota rotor aem injen akimoto parts works obx hatchback honda acura integra ls rs gs gsr type r civic dx cx ex hx lx si crx hf del sol oem jdm da da9 da6 db dc dc2 ef ef8 ef9 eg eg6 motor integra da dc eg ission, VTEC, V-TEC, non-VTEC, B18, B18A, B18B, B18A1, B18B1, B16, B16A, B16A2, B18C, B18C1, B18C5, D16, D15, suspension, break, brake, greddy, tanabe, cusco, zex, nos, turbo, drag, hks, aem,subwoofer powered subwoofer subwoofers svs subwoofer
home subwoofer car subwoofers best subwoofer subwoofer cable
subwoofer reviews car subwoofer klipsch subwoofer subwoofer wiring
home theater subwoofer yamaha subwoofer subwoofer amplifier
jbl subwoofer subwoofers for sale jackhammer subwoofer subwoofer boxes
hsu subwoofer sunfire subwoofer kicker subwoofers pioneer subwoofers
subwoofer car audio car audio subwoofers powered subwoofers
cheap subwoofers home subwoofers 15 subwoofer
subwoofer placement computer subwoofer active subwoofer
velodyne subwoofer mtx subwoofer kicker subwoofer subwoofer box
infinity subwoofer home audio subwoofers
car speakers and subwoofers
cheap subwoofer
home theater subwoofers
rel subwoofer
wireless subwoofer
jbl subwoofers
10 subwoofer
subwoofer speakers
8 subwoofer
bazooka subwoofer
subwoofer enclosures
custom subwoofer boxes

on Jan 28, 2011 | Honda Civic Cars & Trucks

1 Answer

What engines can fit in a 1997 honda del sol


Assuming you have a 1500. You can fit a d series, D16a1 or D16y8 (120-130bhp), a B16 (150) a B16a (JDM 160), a B18 from a Integra Tpre R (187), a K20 from a RSX, or a H22 from a Prelude. Most engines need a little work and wiring harnesses, but check it out thoroughly online on forums to udnerstand what is involved.

My personal choice would be a B16 or B18, light engines that are bulletproof.

Go for it :)

Jul 28, 2010 | 1997 Honda Civic del Sol

1 Answer

I have a 90 crx si with a b16a vetec engine in it. I was wondering what kind of engine is in it because it is a swap. the motor number is 1207276? and i have an idleing problem and im pretty sure that its...


A B16A with no number fallowing it is a JDM engine. If it was a B16A1 for example it is a USDM engine. As for the idle problem its probably a tps sensor and if it idles really low rpms you should up the idle at the trottle body to idle at 800 rpms to be safe, To low of a idle will cause bearings to go out and throw a rod.
Lookj at the valve cover if it is a jdm you will know if it is a SIR or a SIR2, SIR has larger font for the DOHC and smaller font for the VTech The sir2 has larger font Vtech and smaller font DOHC. The SIR2 also has oil jets underside of pistons and rods to help lubricate piston rod conections.

Apr 07, 2010 | 1990 Honda CRX

1 Answer

So, I have a 1993 Honda Civic si hatchback and I'm dropping a B16A engine into it, what kind of tranny am I going to need and clutch with it? I've heard of YS1 cable tranny, but would a regular ACT high...


In short yes the ACT clutch would work fine I have done the conversions myself and I've mated a B16 engine to a B18 gearbox. Be sure to uprate your drive shafts and brake system. ATB

Dec 15, 2009 | 1993 Honda Civic 4 Door

1 Answer

What different gear box can fit honda integra xsi vtec 1600cc b16a? i want to change my gear box ,and i want to know what exactly other gear box can fit my car?thanks its a integra bot the product can show...


J1/S1 Found in: Integra XSI/RSI (DA6) Type: Cable 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.848 R: 3.000 FD: 4.400 Y1 Found in: CRX/Civic (optional LSD) Type: Cable 1st: 3.166 2nd: 2.052 3rd: 1.416 4th: 1.103 5th: 0.870 R: 3.000 FD: 4.266 YS1 Found in: Integra 92-93 XSI/RSI (DA6, DA9) Type: Cable 1st: 3.307 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.880 R: 3.000 FD: 4.400 S80 Found in: Integra Type R 98+ (LSD) Type: Hydraulic 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.034 5th: 0.787 R: 3.000 FD: 4.785 S80/Y80 Found in: JDM SiR-G (optional LSD) Type: Hydraulic 1st: 3.230 2nd: 1.900 3rd: 1.360 4th: 1.034 5th: 0.787 R: 3.000 FD: 4.400 Y21/Y80/S80/S4C Found in: JDM 96-97 Integra R(LSD) JDM Civic R [EK9](LSD) JDM Civic SiR [EK4, EG6] JDM CR-X DEL SOL SIR (EG2)(optional LSD) USDM DEL SOL VTEC (EG2)(OPTIONAL LSD) Type: Hydraulic 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.848 R: 3.000 FD: 4.400

Jun 08, 2009 | 1990 Honda CRX

1 Answer

I have a 1990 honda civic hatchback si with an 89 ZC DOHC black top engine.. the rear motor mount is cracked and each time i down shift the engine raddles.. how do i change out the mount? and if possible.....


You will need something to lift the engine so that you can take the pressure off of the mount. It sounds like your fuel pump may be wearing out and it is not responding like it should...The pump on the gas tank should be located on the top of the tank....Under the back seat....

May 07, 2009 | 1990 Honda Civic

1 Answer

B16A


The B16a will fit in the 86 as far as the positioning, and motor mounts go. Of course you will have to upgrade the ecu, or at least get a piggy back unit for the extra fuel to run that monster. Hope that helps. Oh yea, and I am pretty sure the tranny should fit, but you may want to check the codes/serial #'s at your local dealer.

Mar 12, 2009 | 1986 Honda Civic

2 Answers

Just a question


The swap is easy but too much to post here. I will fit into any civic 89-00 with the right aftermarket mounts from hasport or just go to ebay. The engine harness can be purchased at a local juck yard if you don't have a harness with 4 injectors. I you have only two injectors then the harness will need to be modified with vtec wiring and ad the other 2 injectors. Any 90-93 integra axles will fit as long as you use the halfshft. Must be manual. and use a modified shif linkage from ebay. Youmust take off the caps behind the civics hubs. Use a PWO or PR3 ECU. Good luck.

Jan 28, 2009 | 1989 Honda Civic

2 Answers

Which engine fits a del sol honda 1993


Anything that is OBD 1 or newer if you want it to be legal, here are the most common options and the basic requirements. 1. B16A2/3: Completely bolt-in Swap, VTEC needs to be wired, SIR II, Hasport shift linkage. Del Sol VTEC for the del sol 2. B18B: Completely bolt-in swap, SIR II, Hasport shift linkage. Del Sol VTEC for the del sol 3. B17A: Completely bolt-in swap, cable-hydro transmission kit(not recommended) or hydraulic b-series transmission, VTEC needs to be wired. 4. B18C1: Completely bolt-in swap, VTEC needs to be wired. 5. B18C5: Completely bolt-in swap, OBD conversion, VTEC needs to be wired. 6. B16B: Completely bolt-in swap, OBD conversion, VTEC needs to be wired. 7. H22A: Mount kit required, Hasport shift linkage, VTEC needs to be wired. 8. B16A: Not recommended! Too much work, more costly compared to B16A2/3's. 9. D16Z6: Completely bolt in, VTEC needs to be wired. 10. D16Y8: Completely bolt in, VTEC needs to be wired. If you want to know more check this out - http://hondaswap.com/swap-articles/en gine-swaps-101-a-29052/

May 18, 2008 | 1995 Honda Civic del sol

Not finding what you are looking for?
1993 Honda Civic 4 Door Logo

Related Topics:

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...