Question about 1996 Ford Aerostar Extended

1 Answer

Ford aerostar xlt 4.0. 1996 code p1443.ch.eng.light is on

What can i do?

Posted by on

  • 1 more comment 
  • its420_us May 11, 2010

    P0443 is evaporative emission controls; P1443 is manufacturer specific.

  • its420_us May 11, 2010

    1443 is a manufacturer specific code. Take it to a dealer for repair.

  • brendafterry
    brendafterry Nov 10, 2012

    how do I release the back seat seatbelts?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Ford Expert
  • 180 Answers

That's an evap system leak. You can do a visual inspection of the hoses and have the gas cap tested or just replace if the seal looks bad. Other than that, find a shop to do a smoke test to pinpoint the leak.

Posted on Mar 04, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 106 Answers

SOURCE: 97 ford ranger/check eng. light on/P1443 DTC

P1143 Air assist control valve range/performance

Could Be your mass air flow sensor. Start there.

Posted on Jun 09, 2009

  • 30 Answers

SOURCE: 02 Ford Explorer XLT 4x4 High light flashes and

I had same problem on my 2002 explorer. Its either the computer module, or the electric solenoid on the transfer case. In my case it was both. The computer module I had done twice in 14 months.

Posted on Jul 04, 2009

geaeri95
  • 127 Answers

SOURCE: 2002 ford escape xlt eng codes po302 ?????

Zeevert was right about all but one thing. Cylinder two is the rear middle cylinder on a V6 or the second one from the passenger side on a 4 cylinder.

Posted on Oct 10, 2009

  • 25 Answers

SOURCE: 1996 Ford Explorer XLT abs light comes on on

The ABS light is for the Anti-lock Braking System. The MIL will illuminate if there is a difference in wheel speed sensors signals to the PCM. So you might have a wheel speed sensor that is going out on you. Does the light come on at low speeds, or just higway speeds? You could take the vehicle to a local parts store and have them pull the codes for you and that will tell you which speed sensor is out of whack. Also road grime, dirt and gunk buildup can cause speed sensors to give false readings. Hope tihs helps you out.......

Posted on Oct 22, 2009

motor1258
  • 6674 Answers

SOURCE: emission test showed error code p1443.check engine

You might want to try "google images" just type in your vehicle and what your looking for. Here's an example (link) of what to look for.

http://www.fordmuscle.com/forums/attachments/all-ford-techboard/4132d1212515121-code-p1443-help-96tbird_evap.jpg

Posted on Oct 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

We have a 1990 Ford aerostar minivan and the blower motor isn't working. I don't know where the resistor is or where the blower motor is located. Anyone know?


Blower motor is in dashboard. Problem could be with motor windings, bearings, fuse, relay, and switch. Check them all out.

Nov 13, 2015 | Ford Cars & Trucks

1 Answer

97 Aerostar p0170 p1443 p0340


some fault codes stored in your car,
use autocom cdp pro cars check your car and clear the fault codes.

May 20, 2012 | 1997 Ford Aerostar Extended

1 Answer

I have a 97 ford escort 4 door, that just read code P1443 Is there anything I can do to fix this since the mechanics want to charge so much?


It is common for the EGR flow sensor to fail, which may be the cause of your problem, might be the EGR but not likely. try cleaning the EGR and replace the flow sensor

Sep 06, 2011 | 1995 Ford Aerostar

2 Answers

Fuse box diagram for 95 Aerostar XLT 2wd


They are usually located in the fuse covers good luck hope this helps

Jul 17, 2011 | 1994 Ford Aerostar Extended

1 Answer

How do u fix a p1443 code or sensor on a 97 ford aerostar


sounds like a failed evap pressure sensor, or a blocked hose between the purge valve, or evac valve stuck closed. this problem is definitely in the emissions system.

Feb 25, 2011 | 1995 Ford Aerostar

1 Answer

96 ford escort lx failed emissions code #p1443


1996 ford escort runs fine with full power but check engine light comes on p1443 and i changed gas cap the light still comes on?

Sep 25, 2009 | 1996 Ford Aerostar Extended

1 Answer

97 ford ranger/check eng. light on/P1443 DTC


P1143 Air assist control valve range/performance

Could Be your mass air flow sensor. Start there.

Jun 09, 2009 | 1997 Ford Ranger SuperCab

Not finding what you are looking for?
1996 Ford Aerostar Extended Logo

Related Topics:

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...