Question about 1991 Jeep Wrangler

4 Answers

1991 jeep wrangler clutch

As i was driving my 1991 jeep wrangler today the clutch petal kept getting looser and loser. now the clutch won't go in all the way making it difficult to shift into gear. what is making this do this?

Posted by on

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Jeep Master
  • 75,822 Answers

U have what is called a hydraulic clutch, one of the hydraulic cylinders hs failed, there is a master and a slave cylinder. The most likely and most common cylinder to fail is the slave cylinder, this requires the transmission to be pulled out to replace it. the art is around $125.00, while the trans is out u might as well replace the clutch, the labor is about the same. Here is a picture of the part, let me know if u can see it.



1991 jeep wrangler clutch - 1abd4ec.jpg

Posted on May 13, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Is there a very short term solution? I just want to get the jeep from my Dad's house home and I don't want to have it towed. Once i have it at my place I can do the more extensive work.

Thanks

Posted on Jul 07, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Try bleeding it first - to see if there is any air in the lines

Posted on Feb 16, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Jeep Master
  • 3,433 Answers

PUT MORE FLUID IN IT. MIGHT GET YOU HOME

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 Jeep Wrangler manual trans. won't shift it into 2nd, 4th, Reverse...


I had the same problem, funny as it sounds but go to jiffy lube, oil rig, or one of those places and have them flush ur trans and have good fluid put in...

Oct 25, 2012 | 2000 Jeep Wrangler

1 Answer

1990 Jeep Wrangler: When I depress the clutch petal with the engine running and the transmission in 1st, the jeep wants to move forward. I have to time the engine speed to shift from 3rd to 2nd and from...


Sounds like a leaking master or slave for the clutch that is not permitting full disengagement. If it only happens when cold it could also be caused by incorrect lube (too heavy) in the transmission, but that is unusual.
Make sure the fluid in the clutch master cylinder is full and that there is no visible seepage where the rod enters from the pedal and that there also is no seepage at the slave unit.

Jan 02, 2011 | 1990 Jeep Wrangler

1 Answer

97 jeep wrangler sport, mechanic changes clutch


If the pilot bearing was the problem it would make noise with the clutch pushed and go away when you let it out. Have you checked the fluid level in the transmission?

Apr 03, 2010 | 1997 Jeep Wrangler

1 Answer

How to replace the clutch? I have a hydraulic clutch and the petal went to the floor today, I assume the clutch went out


did you check the master cylinder yet? It could below on fluid. Check the fluid first and then check the clutch.

Jun 10, 2009 | 1989 Jeep Wrangler

1 Answer

How to replace the clutch? I have a hydraulic clutch and the petal went to the floor today, I assume the clutch went out


the first thing that i would check is the fluid level in the clutch master cylinder. It is just like the brake system. When there is not enough fluid or if there is air in the system this can cause the pedal to go to the floor. If this is ok then a portion of the clutch MIGHT have went out. Let me know if the hydraulics are ok.

Jun 10, 2009 | 1989 Jeep Wrangler

1 Answer

1991 jeep wrangler


yes it could be also check the fluid level!

May 14, 2009 | 1991 Jeep Wrangler

1 Answer

1991 jeep wrangler sahara shifting promblems


Your clutch is not disengaging. If it a hydrolic clutch chk. the fluid in resavor, Or slave cyl. for the clutch is bad, Or it has got air in it and needs to be bleed. This is a clutch problem, nothing wrong with trans. If its a manual clutch linkage its an ajustment thing. My best guess if its hydrolic slave cyl. went bad, or resavor is out of fluid.

Feb 10, 2009 | 1991 Jeep Wrangler

1 Answer

How do i bleed the tranny lines in 1991 jeep manual transmission


Auto parts stores have whats called trans. cooling line flush just ask them and they will know what you want.

Feb 09, 2009 | 1991 Jeep Wrangler

2 Answers

1991 jeep wrangler not shifting into gear could this be clutch


I would first bleed the tranny lines, if that doesnt work then your tranny is out and need to get it replaced. FYI with Jeep Wranglers, It is better to get a new transmission then to rebuild them

Feb 09, 2009 | 1991 Jeep Wrangler

Not finding what you are looking for?
1991 Jeep Wrangler Logo

1,316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...