Question about 1994 Chrysler LeBaron

1 Answer

Triing the tighting down the rod bearing need to know the torch on my 94 chrysler labaron 3.0

Posted by on

  • donut2630 May 13, 2009


  • donut2630 May 13, 2009

    would have never found it on my own thanks



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 701 Answers

Hello donut2630: My name is Roger and I can answer your question for you. THe correct torque is (37-38 ft. lbs.) Should you need the main torque it is (65-72 ft.lbs.) Please rate the quality of the answer as this is how we know you received the proper information. Thank You for using FixYa.Roger

Posted on May 13, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is the black and green wire attached to the 1991 Chrysler Labaron radio used for?

this may be the memory wire for the factory unit if putting in an after market radio you shouldn't need it

Jun 28, 2012 | 1991 Chrysler LeBaron

1 Answer

1995 3.0v6surges at speed when going down an incline

Sounds like a vacuum leak. Need codes from engine

Nov 27, 2011 | 1997 Chrysler Sebring

1 Answer

On my 94 labaron I'm trying to change surpintine belt but have to take off the v belt first where is the adjuster nut or tensioner

whatever the V belt is driving is the tensioner, loosen the mounts for that item, it should slide to loosen the unit, so the belt can be removed

Sep 23, 2011 | 1994 Chrysler LeBaron

1 Answer

I have an opportunity to purchase a 94 labaron with 54K original miles..should I do it?? 4 cyl or 6??

these are good cars, but i would have the car checked out by a reliable mechanic to make sure there are no mechanical and electrical problems, a 4 cylinder or a 6 cylinder engine is good.

Apr 03, 2011 | 1994 Chrysler LeBaron

3 Answers

Can i replace a tie rod {inner} on a 94 ford mustang , drivers side without taking off rack and pinion. I need to get a roll pin off the inner tie rod and thats the problem it looks pressed in not set...

Real simple, assuming you know how to take the outer tie rods off. You have to take the clip that holds the plastic boot on off, then slide back the plastic boot, and you'll be able to unscrew the whole inner tie rod assembly. The hardest part of the whole process is installing the new ones to the exact settings of the old ones

Mar 13, 2010 | 1994 Ford Mustang

2 Answers

1994 crystler labaron alarm system deactivation

Lock your doors. Then Unlock with the key. Unless you mean complete deactivation

Nov 23, 2009 | 1994 Chrysler LeBaron

1 Answer

How do I get the engine codes on a chrysler labaron 1994?


Aug 20, 2009 | 1994 Chrysler LeBaron

1 Answer

Stuck bearing

You can punch it out but it is not an easy task and the other way is to cut it out with a torch, I do it al the time when the race seizes up in the drum or spindle or rotor assembly if it's a rotor you will see on the back side two half moons where you can tap it out with a hammer and a half inch rod, you have to hammer it equally and use wd 40 to help it slide out easier. Then sand it before replacing the race. One other thought if it turned the metal blue then you need to replace the assembly as it will lose temper and can cause brake or bearing failure or a failure of the axle.

Jul 21, 2009 | 1998 Chrysler Sebring

Not finding what you are looking for?
1994 Chrysler LeBaron Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

80637 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides