Question about 1994 Chevrolet S-10 Blazer

1 Answer

Ignition fuse in my 1994 chevy blazer s10 keeps popping

My dad is pretty good when it comes to fixing cars he just needs to be pointed in the right direction of where else to look. he checked the engine wiring harness and saw nothing. he also checked the alternator and fuse box.

Posted by on

  • 2 more comments 
  • Tiffany Buckhalter
    Tiffany Buckhalter May 14, 2009

    starter was just replaced because it was arcing, but no change, fuses still pop and it cranks for like 10 secs before it starts

  • Tiffany Buckhalter
    Tiffany Buckhalter May 14, 2009

    yeah the fuel filter is getting replaced this weekend. if there is not enough fuel getting to the engine will that cause the car to shut off everytime we stop at a stop light and make fuses pop

  • billie ramos
    billie ramos May 11, 2010

    have you check to see if there is enough fuel getting to the engine?

  • billie ramos
    billie ramos May 11, 2010

    is the starter working?......when you twist the key does it light up?


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

Start checking all ground wires for a short

Posted on May 26, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2002 chevy s10 blazer when i turn on the heater the lights on the dash will come on like when you are starting the truck and the blower don`t work

Note the diagram for blower motor. Note the fuses, not only check the fuses, check the fuse circuit for voltage, use a test lite. Some of those fuses get ignition feed, they go hot with the key on.
You may have to check feed to and from ignition switch when problem is ongoing? Could be problem with ignition switch? Don't replace anything unless your testing points in that direction.
At the blower motor wire connector, purple wire is voltage, black is ground.

Nov 25, 2016 | 2002 Chevrolet Blazer

1 Answer

My chevy S10 blazer won't start, all it does is turn over no fire

Crank sensor, ignition module, coil, pick up coil, wiring, rotor, points,distributor, or distributor cap. This pretty much covers from the 70's to today.

May 01, 2016 | Cars & Trucks

1 Answer

I was given a 1994 s10 Chevy Tahoe vortex blazer

I was given a 1994 s10 Chevy Tahoe vortex blazer??????? It's either a S-10 pick-up or it's a Tahoe or a Blazer not all three . So which is it ?

Mar 11, 2017 | 1994 Chevrolet S-10 Blazer

2 Answers

Trying to locate the ignition module for chevy blazer s10 1994

Ignition module sits in the ignition distributor, remove distributor cap, there will be two elec. harness plugs, the one with two wire's is for the pick up coil, the other one is for the ignition module, just unscrew module out of distributor and install new one.

Sep 23, 2010 | 1994 Chevrolet S-10 Blazer

1 Answer

1997 chevy s10 blazerdash wont light up when key

the dash sound's like a fuse, check the fuse box under the hood and in the door jamb on the side of the dash, also check your fuel filter and fuel pump, im betting on the pump because i have a 2001 chevy blazer that has had two replaced and it has 233000km on it!

Jun 04, 2010 | 1997 Chevrolet Blazer

2 Answers

1994 s10 blazer no spark

Sounds like the ignition module. Do you know if it is tbi or cpi?

Mar 28, 2010 | 1994 Chevrolet S-10 Blazer

1 Answer

Transmiision for 1994 Chevrolet s10 blazer

if its the rear seal where the driveshaft enters the trans you need a transmission output seal for the tailshaft housing.

Sep 24, 2008 | 1994 Chevrolet S-10 Blazer

4 Answers

1998 Chevy S10 pickup backup lights don't work

Yes it screws in on right side of tramission and you will need a 7/8 inch deep socket to remove it. You may be able to clean the old one once it is removed. There is a little ball thatgets dirty and may you can get by with cleaning it. Good Luck. Ed

Sep 06, 2008 | 1991 Chevrolet S-10 Blazer

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

462 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides