Question about 1995 Oldsmobile Cutlass Ciera

1 Answer

1995 cutlass ciera stop light and third light don't work

I notice that the brake lights and third brake light won't work, and running light and turn signal works. Would it be the pedal switch. I heard the the brake light goes through the turn signal, what should I look for?

Posted by on

  • 1 more comment 
  • skutny May 13, 2009

    I have checked the bulbs in the tail light, I have not figured out how to check the bulb in the third light yet. I just remembered, to check the 4way flasher see if they work.

    Thanks,
    skutny


  • skutny May 19, 2009

    Thank you everyone, it was the brake light switch.

  • Roberta Smith
    Roberta Smith May 11, 2010

    have you tried replacing the bulb ?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 218 Answers

THE 3RD BRAKE LIGHT DOES NOT GO THROUGH THE TURN SIGNAL SWITCH.ASSUMING THE 3RD BRAKE LIGHT BULB IS GOOD.U SHOULD CHECK THE BRAKE LIGHT SWITCH ON THE BEAKE PEDAL.SHOULD BE POWER GOING IN & POWER OUT WHEN U ARE IN THE BRAKE

Posted on May 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlights brake lights radio none work car runs and turn signals work, double checked fuses and all wiring is fine . is it a relay fuse and if so which one. owners manual does not tell you


check the 2nd wire from positive side of battery that goes to plug about 15 inches away, inplug turn lights on then replug, had a loose connection

Oct 07, 2013 | 1995 Oldsmobile Cutlass Ciera

1 Answer

92 oldsmoble cutlass ciera when i turn on the lights for night driven the fuse for the tail light blows. i tried 30 amp and it still blows


There is a short somewhere.I would first check the brake light wires inside the trunk for grounding out on metal somewhere.

Oct 17, 2012 | 1995 Oldsmobile Cutlass Ciera

1 Answer

I have a 1996 oldsmobile cutlass ciera won't turn


Batter charged? Could be a starter also. And dirty cables. Does the interior lights work or head lights.

Jun 14, 2012 | Cars & Trucks

3 Answers

I was driving and the car cut off. It won't start but it cranks and won't turn over.It is a 1995 Olds Cutlass Ciera SL, 6 Cylinder.


your terminology is wrong.if it cranks its turning over what you mean is it won`t start(fire up) as you said at the beginning.anyways it sounds like you could have a fuel pump problem that stop working.this happens alot.you should check for spark at the plugs to make sure its not an ignition problem.did you notice a check engine light on when it was running.if so there will be a code in the ecm and may be the cause of your problem.

Jul 17, 2011 | 1995 Oldsmobile Cutlass Ciera

2 Answers

Apply brakes turn signals stops release brake they work


Check all of your bulbs, and check for good grounds at ALL external lights. When testing lights be sure to test with running lights on and off.....

Feb 07, 2011 | 1989 Oldsmobile Cutlass Ciera

1 Answer

My daughters hand me down 1995 olds cutlass ciera has 103,000 miles. It was grandmas and well maintained. It has started shutting off while driving. No rhyme or reason....


One possibly/likely problem is that the ignition circuit is cutting out. I had this same issue on a car (malibu) and found it was an intermittent ignition switch connection. Replacing the ignition switch fixed it for good.
One thing that will really help you is to notice you dash lights when this happens. If the dash lights go out when the car stops, then this is it. If the dash lights (ignition) stay on, then you have another issue.

Nov 21, 2010 | 1995 Oldsmobile Cutlass Ciera

1 Answer

My 1995 oldmobile cutlass ciera ABS light is on on the dashboard. what does it mean and what needs to be fixed?


I would check the brakes,and rotors,all the way around,then the wheel bearings.If it all checks out good,then it is most likely a wheel sensor for the abs,antilock brakes.

Dec 05, 2009 | 1995 Oldsmobile Cutlass Ciera

1 Answer

89 Ciera. Lots of problems. Stops and won't start


i have and injector test done the tail lights n brake lights use a dual filament bulb u might just need new bulbs

Mar 13, 2009 | 1989 Oldsmobile Cutlass Ciera

1 Answer

93 Oldsmobile Cutlass


check for a crossed filament in the brake lamp bulbs on the right side. have seen this many times before- usually at 5:00 on fridasy when i was on the way out the door
good luck

Aug 17, 2008 | 1993 Oldsmobile Cutlass Ciera

2 Answers

Brake lights


5891018758910190Hope this helps. contact me if you need more help please give me a rating if you would.

Jun 13, 2008 | 1995 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1995 Oldsmobile Cutlass Ciera Logo

414 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...