Question about 1995 Pontiac Grand Prix

1 Answer

The glove box lock fell out. How do I replace either the lock or whole box? I can't find any screws/bolts. Thanks

Posted by on

  • Roberta Smith
    Roberta Smith May 11, 2010

    should be a C clip that holds that lock in... look for it in the glove box as that is where it likely fell.

  • Anonymous Mar 15, 2014

    I have the new latch but I have to replace lock

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

On the inside of glove box there are 2 hex screws that hold the lock in place. the lock it self is a dealer part and so is the box. If you have the lock go to your nearest GM dealer and they can tell you what size screws you need if they can't tell you i can find the size for you. This is an easy job to do it yourself. Also if you have the old lock it is keyed the same as your door/trunk lock.

Posted on May 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The lock on my 1998 Pontiac Grand Am glove box is broken so the door to the glove won't stay shut. Any ideas?


go to junk yard ,local auto store or dealer for loch or whole glovebox door --replacement easy lock remove the screw and replace lock ==whole door remove the screws and replace

Oct 04, 2016 | 1998 Pontiac Grand Am

1 Answer

2004 grand prix glove box handle broken, handle snapped off and lock mechanism fell out


improvise ,you will find a way to open it ,pull or push the two plastic bars that operate the locking bits on the end

Dec 28, 2013 | 2008 Pontiac Grand Prix

2 Answers

Where is the computer box located in a 97 avallon


Instructions
    • 1

      Remove the battery cover to access the battery terminals. Disconnect the negative (-) battery cable with the pliers.

    • 2

      Open the glove box door and squeeze the outer part to remove the door. Locate the two screws behind the door to remove the glove box.

    • Sponsored Links

    • 3

      Access the ECU behind the glove box. Remove the electrical connectors by hand; remove the bolts mounting the ECU to the inner dash.

    • 4

      Install the new ECU in the same position. Replace the bolts and reconnect the electrical connectors.

    • 5

      Replace the glove box and the glove box door. Reconnect your battery.

Sponsored Links

Read more: How to Replace a Toyota Avalon ECU ' eHow.com http://www.ehow.com/how_6170111_replace-toyota-avalon-ecu.html#ixzz289jiGlka

Oct 02, 2012 | Toyota Avalon Cars & Trucks

2 Answers

2000 XK8 I locked the glovebox and now it won't open . any ideas


Welcome to Fixya

The car might be stucked in Valet mode. Use the black key that you have to open the trunk, it overrides the Valet Mode. The key goes in a hole that is between the X and the K on the emblem on the rear of the car.

Thank you for using Fixya!

Aug 08, 2011 | Jaguar XK8 Cars & Trucks

1 Answer

HOW TO TAKE LOCK OUT OF GLOVE BOX DOOR HANDLE?


Hello, to take lock out of the glove box door handle you have to follow these steps:
1. You have to open the box door.

2. Push latch to close position

3. Put in lock position and remove the key

4. Push in tab

5. Insert the key

6. Turn the key to unlatch the position and pull lock out.

7. If latch needs to be replace, UN-screw collar

8. Reverse to re-install .

Thanks

Jun 29, 2011 | 1993 Chevrolet Caprice

1 Answer

The catch on the glove box lid on a vw golf 2001 is broken how do i fix it?


You need to replace the whole glove box door. Pry the panel on the right side of the dash off, remove the t25 screw, remove the 3 t20 screws along the bottom of the glove box, and the t20 screws that you can see inside the glove box. This will loosen it enough to pull the whole glove box loose. Then you need to remove the damper by prying the little plastic pin out. Then remove the bracket it secures to that has a t20 screw in it. There are 2 plastic pins in the hinges that need to be popped out, once this is done, the door will come off. Reassembly is the reverse.
If the pins are difficult to reinstall, file the new glove box door hinge holes with a round file. I usually shoot a little oil into the damper too, just to make operation easier.

Feb 04, 2011 | 2001 Volkswagen Golf

1 Answer

2001 Dodge Grand Caravan heater blower motor not working at all...worker off and on during a cold spell....now not at all ....dealer suggested replacing blower motor and resister...cost $1000....due to the...


The Blower Motor Resistor is located behind the glove box on the dash. Remove the whole glove box to access. The Resistor is mounted against/sort of into the fire wall.
1. Disconnect the negative side of battery.
2. Disconnected the Electrical Connection to the Resistor.
3. Remove the bolts/screws. I believe they have 8mm heads, there should be 2 of them.
4. Replace with new one/Replug electrical connection.
5. Reconnect the negative side last.
6. Test System before putting the glove box back in!
The Blower Motor is easy (compared to $1000) to remove and replace.

Jan 01, 2010 | 2001 Dodge Grand Caravan

1 Answer

Lower Glove Box Won't Close


I fixed this in a 2010 Rav4 by lowering the glovebox all the way and finding that the cover to the cabin air filter had fallen off and was jamming the hinge of the glove box. To lower the glove box, pull the glove box side walls inward until the lock tabs clear the sides of the opening and you can rotate it all the way down. Clear whatever is jamming the hinge and rotate the glove box back into position. Be sure the hinge is pushed all the way forward onto the corresponding pin before closing the glove box, otherwise there will be misalignment. There is also a plastic air piston on the right side of the glove box assembly that damps the movement of the glove box. Be sure the piston assembly is secured into the two corresponding locking pins (one on the glove box, the other on the glove box opening) before closing the glove box.

Jul 08, 2009 | 2007 Toyota RAV4

1 Answer

Glove box, LOCK BROKEN IN LOCK POSITION


If the glove box is anything like mine it is a modular piece assembled with screws.... let them break the handle.. get a replacement first from a junk dealer and have the broken part swapped out. Its like a seat belt catch in my 97 deville. The glove box in mine flopped open and the catch had broken and fell down the door of the glovebox itself. The whole door is assembled with philips screws and should be easily removed and a new latch put in.. whoever does it should not cost more than 50.00 in labor MAYBE unless you have a friend that would do it for a beer. I saw a complete glove box on ebay for 40.00 shipping ontop of that .. i saw the latch for 20.00 +shipping.

Sep 29, 2008 | 1998 Cadillac DeVille

Not finding what you are looking for?
1995 Pontiac Grand Prix Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8755 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...