Question about 1997 Ford F150 Regular Cab

1 Answer

Ford explorer v6 ohv 1995 VIN 1FMDU34X2SUA16318

Ford explorer 1995 VIN 1FMDU34X2SUA16318
I lost the transmitters and know I can't use the truck. What can I do ? My truck is down since 20th april 1998. Please help me.

Posted by on

  • 9 more comments 
  • ossobo May 13, 2009

    I can get in with the key but I can't start the truck

  • ossobo May 13, 2009

    Please I'm living in Cameroon there is no ford dealer here to help me

  • ossobo May 13, 2009

    The alarm is triggered and until know, nobody can bypass it here in Cameroon. The alarm is Vehicle immobiliser model VIM 150 ford part P1-F57F-14B207-AB

  • ossobo May 13, 2009

    I'm living in Cameroon, there is no ford dealer here. I bought the truck in Germany.

  • ossobo May 14, 2009

    key and transmitter are indepenant , there is no transponder in that system

  • ossobo May 14, 2009

    I tried all those things since a year now. What I need is somebody to tell me how can I bypass the remote antitheft personality module RAP or how can I purchase another RAP module ford part f57f-14b207-ba . I'm in Yaoundé (Africa)

  • yadayada
    yadayada May 11, 2010

    sorry can't help u, u need a Ford dealer to fix this.

  • yadayada
    yadayada May 11, 2010

    then the security system is defective, u will need to go to a Ford dealer. What does this have to do with the transmitters for the keyless entry????

  • yadayada
    yadayada May 11, 2010

    how could losing the transmitters keeping u from using the truck? u don't have a key?

  • johnny wyatt
    johnny wyatt May 11, 2010

    Is your truck locked and you can't get in?

  • Anonymous Mar 26, 2014

    transmission models

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 145 Answers

Problem is nobody can fix this issue for you your vehicle needs to have the key/computer programmed so the vehicle will start.

the security system thinks that you are using the wrong key to start the vehicle.
there is how ever a quick solution if you have other keys on your key ring, remove them as they may be interfering with the signal.
if it still does not start you however will need to find a dealership to fix your issue as ford is the only one that can program keys/computer.

Posted on May 14, 2009

  • juggernautxt
    juggernautxt May 14, 2009

    sorry i got into new model yrs. in my head.
    have you disconnected the battery? and reset the system? the alarm should not reactivate.


  • juggernautxt
    juggernautxt May 15, 2009

    you can get the key fobs off from ebay, and program it your self if you have your owners manual it will tell you how.
    if i remember correctly it's been a while since i have done one.

    but get in the vehicle lock/ unlock from door switch, then turn the ignition on/off 8 times in a row, the door locks will actuate lock/unlock and push either the lock or unlock button on the remote and it will be programmed to your vehicle.
    disarm the system.


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 2000 explorer 4.0 Soho do I have to remove the injectors to remove the lower intake


REMOVE UPER INTAKE 97 EXPLORER V6 4.0 - YouTube

? 12:22
https://www.youtube.com/watch?v=ugExJ0wkP8A
Jun 11, 2013 - Uploaded by Sum Guy
REMOVE UPER INTAKE 97 EXPLORER V6 4.0 ... I was told that all I have to do is remove the fan belt to get access to it ... FordExplorer 2000 intake manifold gasket upper lower P0174 by froggy - Duration: 36:54. by froggy 36,588 views ... Ford Explorer 4.0L SOHC Rough Idle P0171 P0174 Lean Codes ...

Putting the lower intake on my 1997 Ford Explorer 4.0 OHV ...

? 5:23
https://www.youtube.com/watch?v=qKE1vPxqPHs
Jun 27, 2010 - Uploaded by origionaldz
Putting the lower intake on my 1997 Ford Explorer 4.0 OHV sport .... I do have a 2000 5.0 ... @michaelheiland123654 To dothis job, you have to remove the alternator, unbolt the AC compressor, remove upper intake manifold, remove fuel rail,remove all injectors, ... Do you have the SOHC or OHV version?

1999 Ford Explorer 4.0L -need assistance on removing upper intake ...

www.automotiveforums.com > ... > Ford > Explorer ' Explorer Sport Trac
Sep 20, 2011 - 1999 Ford Explorer 4.0L -need assistance on removing upper intake ...Are you sure you have the OHV/pushrod engine and not the SOHC engine? ... Do youhave the upper intake manifold loose, you just are unable to ... the lower intake gasket, valve cover gaskets, Injector o-rings, plugs and wires. Thanks ...

How to replace upper intake manifold gaskets - Ford Explorer




Dec 09, 2015 | Cars & Trucks

2 Answers

I have a 2000 ford explorer 4.0 v6 ohv and i have an bank 1 sensor 1 code. which o2 sensor is that?


Ford Explorer and V8 O2 Sensor Locations diagram. This shows the location of Ford oxygen sensors on Bank 1 and Bank 2. If you want to know where your O2 sensors are, this diagram is your guide (click over pic for zoom)...

zjlimited_327.gif


Hope helps with this (remember to rate and comment this answer).

Apr 29, 2011 | 2000 Ford Explorer

1 Answer

Do I have to pull or lift motor to remove a oil psn from a 2000 ford explorer 4.0L V6 ohv vin x?


Hi Michael,
In order to remove the oil pan you will have to remove the engine. Good Luck and I hope this helped you.

Jan 03, 2011 | Ford Explorer Cars & Trucks

1 Answer

How to tell if my engine is SOHC or OHV in a 1999 ford explorer


the easiest way is to look at the 8th digit of your vin number. If it is E its a 4.0 SOHC....X its a 4.0 OHV

Aug 25, 2010 | 2001 Ford Taurus

2 Answers

95 ford explorer spark plug firing order


1995 Ford Explorer 4.0 liter SOHC V-6 VIN "X"

1c29885.gif



1995 Ford Explorer 5.0 liter V-8 VIN "P"

d688a13.gif


Hope helps (remember rated this).

Jul 13, 2010 | 1995 Ford Explorer

1 Answer

Belt diagram for a 2002 ford taurus ses


You normally can find the diagram on a sticker on the underside of the hood directly above the alternator on a 3.0 OHV motor 2002 Ford Taurus. I copied one from the Internet and taped it above the headlight on my car so it was easier to view and use. If you send me an email address I can post an image to you that shows the routing diagram or you can use this:

http://www.daycoproducts.com/daycoweb.nsf/DaycoSerpentineBeltGuide.pdf

V6 182 3.0L FI (VIN S)
Multiple Accessory, w/A.C. illust. 5-7 (page 86)

V6 182 3.0L FI (VIN U) (OHV 3.0)
Multiple Accessory illust. 7-12 (page 87)

V6 182 3.0L FI Flex (VIN 2)
Multiple Accessory illust. 7-12

Jun 27, 2010 | 2002 Ford Taurus

1 Answer

WHAT IS THE FIRING ORDER FOR A 1998 FORD EXPLORER


google "ford explorer firing order"

4.0L OHV Firing Order Firing order for the 4.0 liter OHV V6 is
  • 1-4-2-5-3-6
http://autorepair.about.com/od/enginefiringorders1/ 4.0L SOHV Firing Order Firing order for the 4.0 liter SOHV V6 is
  • 1-4-2-5-3-6
http://autorepair.about.com/od/enginefiringorders1/ 5.0L Firing Order Firing order for the 5.0 liter V8 is
  • 1-3-7-2-6-5-4-8
http://autorepair.about.com/od/enginefiringorders1/ How to Find the Cylinder Order V6 When standing in the front of the vehicle the cylinders are numbered 1-3 up the passenger's side and 4-6 up the driver's side. How to Find the Cylinder Order V8 When standing in the front of the vehicle the cylinders are numbered 1-4 up the passenger's side and 5-8 up the driver's side.

Jun 07, 2010 | 1998 Ford Explorer

1 Answer

What is the firing order 93 ford explorer v6 4.0


1993 Ford Explorer 2WD & 4WD
4.0 liter SOHC V-6 VIN "X"

1a7600c.gif

Hope helped with this (remember rated this help) Good luck.

Nov 26, 2009 | 1993 Ford Explorer Limited

2 Answers

Firing order


that is true your firing order is wrong here is a link to a web sight that has all the 1998 explorers 6cyl just click on the one that your explorer is and it'll show you the correct firing order also make sure you have your plugs gaped right good luck.
http://autorepair.about.com/library/firing_orders/bl-ford-firing-98.htm

Mar 22, 2009 | 1998 Ford Explorer

Not finding what you are looking for?
1997 Ford F150 Regular Cab Logo

781 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...