Question about 1994 Chevrolet S-10 Blazer

1 Answer

I have a 1994 Chevy S10 Blazer bad reverse

I have a 1994 Chevy S10 Blazer not sure what transmission it has .Less then 8 months ago it was replaced do to reverse slipping and causing truck to shake.It was replaced with a used one What they say Had 43,000mi on it. It was fine so i thought after that,however dont ever really put much of a load on reverse when driving. It is now doing what the other trans did but not as bad yet.I was parked on a hill and needed to go back but truck just shakes.This only really happens if i go to fast in reverse or on hill.Could it be something other than having to replace trans again?
What to do ? Terry

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 102 Answers

The odds of two different transmissions having the same problem in reverse is astronomical. I think your problem is in the differential. Also check for the proper fluids and additives in the differential. 

Posted on Aug 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 chevy blazer awd - no reverse and slipping in forward - oil good no leaks - whats this?


It sounds like the sun shell inside the transmission that is faulty, and that is due to a manufacturing process..
Unfortunately, this problem requires a rebuild or replacement of the transmission. The same thing happened to me about a month ago with my 97 Blazer. It cost me $1200.00 for a local transmission shop to rebuild mine.
"
The "sun shell" connects the reverse input drum to the sun gear. The 2/4 band wraps around the reverse drum. When the reverse clutches are applied the sun shell spins the sun gear. When the 2/4 band is applied the sun shell holds the sun gear from spinning. This is why when it breaks you lose reverse, second and fourth"

Oct 09, 2010 | 1997 Chevrolet Blazer

1 Answer

Replace valve body


Remove transmission oil pan, and then remove tranmission filter. The valve body is above filter.

Feb 21, 2010 | 1993 Chevrolet S-10 Blazer

1 Answer

"I have a 1994 S10 Blazer, 4 WD, 4.3.


Have you topped up your transmission fluid yet?

Aug 09, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

Blazer will not go in reverse


Need a new tranny! Just had that happen a few months ago to my 02 silverado. I would call a chevy delaership first and see if there are any recalls on them first before take it to a mechanic! Good luck with everything I know it can be a headache but make sure you get as many quotes as possible!

Jul 21, 2009 | 1994 Chevrolet C1500

1 Answer

Transmission filter


It's inside the transmission pan.

Mar 13, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

1995 Chevy S10 Blazer


IT IS NOT GOING INTO NEUTRAL. IT HAS LOST THE DIRECT DRIVE CLUTCH PACK INTERNALLY. SOUNDS LIKE IT IS HIGH MILEAGE. IF SO AND YOU CHANGE THE FLUID IT CLEANS UP ALL THE VARNISH IN THE TRANNY AND THE END RESULT IS TRANNY MALFUNCTIONS DEPENDING ON WHAT KIND OF CARE IT HAS HAD IN THE PAST.

Jan 24, 2009 | 1994 Chevrolet S-10 Blazer

5 Answers

93 chevy s10 blazer fuel pump replacement


try yhe pickup coil or ignition module wich are both located on the distributor or the igniton coil.im going through the same thing.all i have left to try is the ignition module.if i get it ill be sure to let you know

Jan 01, 2009 | 1993 Chevrolet S-10 Blazer

1 Answer

Transmiision for 1994 Chevrolet s10 blazer


if its the rear seal where the driveshaft enters the trans you need a transmission output seal for the tailshaft housing.

Sep 24, 2008 | 1994 Chevrolet S-10 Blazer

4 Answers

1998 Chevy S10 pickup backup lights don't work


Yes it screws in on right side of tramission and you will need a 7/8 inch deep socket to remove it. You may be able to clean the old one once it is removed. There is a little ball thatgets dirty and may you can get by with cleaning it. Good Luck. Ed

Sep 06, 2008 | 1991 Chevrolet S-10 Blazer

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

479 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...