Question about 2004 Hyundai Elantra

1 Answer

Replacing passenger side mirror on 2004 Hyundai Elantra.

I need to know how to or what tool is needed to remove the inside panel to get at the mounting screws to replace the mirror.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,605 Answers

Tools:
philip head screw driver,
flat head screw driver
metric socket std and deep.
rachet metric or 3/8 driver with a adaptor.
socket extension.
lower the windows.
look for small plastic cover on the door handle and door pull, pop the cover with a samll flat head screw and loosen the screws with philip head screw driver.
pull the in side panel from the button of the door panel with the help of screw driver and along the sides.
push the inside panel up wards to clear the glass. and disconnect any of the electric wiring. and left the panel out of the way.
take the window switch from the door pnael and roll up the windows.
peel down th inside water seal.
you should be able to get to the mounting screws for the mirror.

Posted on May 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

'04 Hyundai Elantra passenger side window has fallen off track. How do I fix this?


This is a messy job and can be hazardous.. Needs special tools. You have to remove the inside door panel, remove a sound deadening cover that is a sticky mess and then you can access the window frame. Look on youtube for how to videos.

May 22, 2017 | Hyundai Cars & Trucks

1 Answer

How do you take the front driver side door panel off on 2010 hyundai elantra


It is pretty easy, but care must be taken so as to not damage the door panel. I recommend purchasing a door panel clip removal tool for this purpose. They are available at most parts retailers for just a few dollars. Using these tools to relaese the plastic clips on the door panel can save you a lot of aggravation and expense.

> Remove the triangular-shaped cover that covers the inside portion of the door mirror mountings. It simply "un-clips".

> Remove the screw that retains the bezel over the indide door release handle and remove the bezel.

Remove the two scres retaining the door panel to the door frame. One is under the triangle cover behind the mirror that you removed, and the other goes straight down into the pocket of the door pull.

Then use the special door clip release tool (recommended) or another suitable tool to pop the clips loose around the perimeter of the door panel. Lift out and up to remove door panel.

Installation is the reverse order.

May 28, 2012 | 2010 Hyundai Elantra

1 Answer

Power switch drivers door


Hi

You will have to remove the inside door panel in order to remove the switch assembly. There are 9 or 10 scews to take out and then the door panel will pop off the door and then lift the panel upward to clear glass channel. Turning the panel over, you can now gain excess to the screws holding the switch to the panel.

Hope this helps, thanks for using FixYa.
- Steve

.

Feb 09, 2010 | 2004 Hyundai Elantra

1 Answer

Replacing passenger side mirror and casing


you need to remove the trim pannel parallel to the mirror on the inside of the vehicle, normally triangle shaped, from there there will be 3-4 nuts or bolts you need to remove, once that is done the mirror will be free to be removed.

GOOD LUCK

Jul 17, 2009 | 2005 Hyundai Elantra

2 Answers

Replacing passenger side mirror


no the door pannel does not need to come off but there is a triangle shaped plastic trim pannel above the door pannel that needs to be removed to access the mounting bolts.

May 28, 2009 | 2003 Nissan Xterra

1 Answer

Replacing passenger side miror


need to replace the exterior mirror on the passenger side. How do I remove the mirror from the out side. all the wiring is out Just need advice on how to take of the existing mirrow and replace it with a new one. Does the inside panel need to come off, how many bolts are needed for removal.

Felix.

Dec 29, 2008 | 2007 Chevrolet Tahoe

1 Answer

Replacing driver's side mirror on Kia Sorento


These instructions are for a 2013 Kia Sorento (Passenger Side Mirror)



1) remove speaker cover on inside door panel:



3_18_2013_2_40_43_pm.jpg
2) Use a small screwdriver to pry it away from the door. Be careful of the paint:
3_18_2013_2_41_45_pm.jpg

3) The panel will expose the 3 main bolts that need to be removed:
3_18_2013_2_43_24_pm.jpg

4) The cable harness needs to be removed this is located behind the door panel. Remove the one screw behind the screw cover:
3_18_2013_2_44_56_pm.jpg3_18_2013_2_45_02_pm.jpg3_18_2013_2_45_08_pm.jpg

Once the one screw is removed it will allow you to move the door panel enough to get to the harness and the 2 bottom bolts.

Here is how the harness looks:



3_18_2013_2_46_36_pm.jpg
Once the harness is removed and the 3 bolts removed the mirror will come out.

Repeat the steps to re install your new mirror.

Dec 25, 2008 | 2004 Kia Sorento

1 Answer

Replacing passenger mirror


go to the store and get a door panel clip removal tool, you have about 10 of them around the door panel, to remove the mirror, you do not need ot unplug the switches or any thing, just let the panel dangel. you have 3 bolts, with 10mm nuts on them, just remove them the mirror willl fall out, and vise versa for the new one.

Nov 21, 2008 | 2004 GMC Envoy

3 Answers

Replacing RH Side view mirror on a 2006 Toyota Sienna


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jul 29, 2008 | 2006 Toyota Sienna

1 Answer

2004 passenger side mirror replacement


Not difficult if you know how to remove your door panel, most require that. then three nuts and a plug.

Jul 07, 2008 | 2004 Mercury Mountaineer

Not finding what you are looking for?
2004 Hyundai Elantra Logo

649 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...