Question about 2004 Kia Rio

1 Answer

Need help replacing front hub

I need a diagram to help me remove the front hub from my 2004 kia rio.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kia Master
  • 2,984 Answers

Here's the steps....getting some pics for you....hang on a minute or two.

Front Hub Removal & Installation To Remove:

  1. Remove steering knuckle.
  2. Using a suitable slap hammer, remove wheel hub assembly.
  3. Using a suitable bearing press, remove outer bearing, oil seal, outer bearing race and preload spacer.
  4. Remove inner oil seal, inner wheel bearing and inner bearing race.
NOTE: It is not necessary to remove dust cover (back plate).
To Install:
  1. Using a suitable bearing press, install bearing races in steering knuckle.
  2. Pack the bearings and hub area with lithium grease.
  3. Install inner bearing in steering knuckle.
  4. Lubricate lip of NEW inner seal and press seal into knuckle.
  5. Install preload spacer into bore.
  6. Install outer bearing into bore.
  7. Lubricate lip of NEW outer seal and press seal into knuckle.
  8. Using an appropriate tool, support inner wheel bearing and press wheel hub into knuckle with a force of 2500kg.
  9. Install NEW inner seal.
  10. Install knuckle assembly.

Posted on May 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the front wheel hub?


Undo the large nut on hub undo top and lower ball joint also brake caliper press out the Centre shaft and hub and .old bearings fit new ones.

Jul 09, 2015 | 2004 Kia Rio

1 Answer

What is the 2005 kia rio front axel nut torque ???


Hi,
for the front hub its 157 - 235 Nm.

Sep 20, 2014 | 2005 Kia Rio

2 Answers

Firing order for 2003 kia rio? ? ? 1 2 3 4 ? ? ...


Hi Grey:
1-3-4-2. (2004 Kia Rio Manual, current for A3D and A5D engines.)

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Dec 13, 2011 | 2003 Kia Rio

1 Answer

Want to replace bulb in dome ,removal of dome light casing on 2004 kia rio


just pull it down from the front its just clips....

Sep 12, 2010 | 2004 Kia Rio

1 Answer

Timing belt for a 2004 kia rio cino 1.6 does the engine need to be removed?


No, the engine does not have to be removed. Know that this is an interference engine. If the belt breaks serious engine damage will occur. Replace at 60,000 miles except California cars, which should be replaced at 105,000 miles.

Aug 28, 2009 | 2004 Kia Rio

1 Answer

Need instruction manual/schematics for replacing 2005 kia rio driver side rear wheel bearing. i've got the wheel/hub/bearing off, not the inside ring to the bearing. i need to know how to replace it .


clean all the grease if there is any out of the hub, turn the hub over and using a drift and hammer strike the shell from the back edge working around the shell as you go, should not take too much to remove it but you will need a bit more than a tap with the hammer.
Hope this has helped you

May 22, 2009 | 2003 Kia Rio

1 Answer

Need to replace a rear wheel bearing, can't even get the hub off!!!


pull off rim. there is a cap in the center of the hub that you will have to tap/pry out with a screwdriver, then remove bolt and slide hub off.
thats how i fixed mine.

May 06, 2009 | 2004 Kia Rio

2 Answers

Need diagram/detailed advice on how to replace rear wheel bearing


Go to autozone.com enter your car info in. go the repaor section and it will be there.

Mar 22, 2009 | 2004 Kia Rio

1 Answer

Repair diagram for 2004 kio rio


my 2004 Kia Rio keeps losing power?

Jul 09, 2008 | 2004 Kia Rio

Not finding what you are looking for?
2004 Kia Rio Logo

1,456 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...