Question about 1993 Buick Roadmaster

2 Answers

Bulbs are all good and the flashers work but I am getting nothing on the dash or when I turn them on?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 59 Answers

Have you checked your fuses? Usually this is a fuse problem. However, it all fuses are good you are going to have to pull your dash board to figure out the actual problem. Could be a wiring problem or something else. Hope this helps at least some.

Posted on May 13, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 52 Answers

Printed circuit on the rear of the dash. Or a Ground fault have an auto electrician check the Cars Ground out otherwise it a trip to the junk yard to try and locate new dash

Posted on May 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 mazda 626,front left turn signal doesn't work (blinks rapidly on dash)Only when the headlights are on, 4 way emergency flashers work fine. Bulbs ok. changed flasher it's ok. ???


I hear what you are saying however....whenever there is a bulb that is not good....you will get rapid flashing on the dash. Replacing the bulb is cheap...do it as a test if nothing else.

Semper Fi,
Z

Apr 29, 2017 | Mazda Cars & Trucks

1 Answer

Turn signal problem.Fixed all bulbs and made sure flasher relay was working.all running lights brake lights reverse lights work and hazards work.but I get nothing on dash or lights when trying.


Double and triple check the fuse for your rurn signals both visually and with ammeter to check for fuse continuity, or just replace with new one of same amperage. The fuse can look good but have a hairline crack that is not visible.

Oct 19, 2015 | Cars & Trucks

1 Answer

Turn signals not working


Typically the turn signal circuit starts at a fuse then goes through a flasher. From the flasher it goes to the turn signal switch where it is routed to the appropriate bulbs.

There are some cues as to where to start looking. If the bulbs light up on the car and/or the dash than the flasher is most likely the problem. If nothing lights up it could still be the flasher but it could also be a fuse.

Apr 11, 2014 | 1994 Honda Accord

1 Answer

My turn signals dont work how do i repair it


Start by checking the fuse under the dash panel. And make sure your bulbs are good. If nothing happens at all when you use the turn signal switch, it is possible you have a bad flasher relay located under the dash, the little cylindrical unit that causes turn signals to blink, and makes the clicking sound when signals are blinking. Used to be very cheap, but the newer units are a little more pricey, more sophisticated. If a new flasher doesn't fix it, then you may have a bad turn signal switch on the steering column.
The circuit for the turns goes from the fuse, up to the turn switch, back out to the flasher, and then to the turn signal bulbs.
Good luck.

Feb 23, 2012 | 1991 Buick Park Avenue

1 Answer

Why turnig lights not working when i hit the switch?


If the bulb where burnt out the turn signal would flash faster than normal. I can't imagine that all four bulbs would be burnt out as Thomas suggested. This would be the only possible way that the bulbs would cause the turn signals to completely stop working.

Here is what I would suggest. If the turn signal arrows in the dash illuminate along with all the turn signal bulbs but they just don't flash than replace the flasher.

If nothing illuminates than than first male sure that the tunr signal fuses are good. If they are let me know and i'll get you some more diagnostic info. It is still likely the flasher but it isn't that difficult to check out to make sure.

Thank you for using FixYa.com!

Feb 01, 2012 | 2001 Kia Sephia

1 Answer

Turn signal will not flash


Check bulbs to see if all bulbs are lighting. Check to see if the Hazard lights flash. Replace flasher under dash for turn signal if bulbs are good and hazard flasher works. Otherwise, the turn signal switch might be bad in the steering column..

Nov 04, 2011 | 2004 Chevrolet Monte Carlo

2 Answers

I have a Frontier XE 2001. Niether turn signal works have good bulbs and fuses are OK. Where else should I look.


did both signal lights stop working at the same time or not,it may just be the signal flasher has gone bad,it is located under the dash by the fuse panel.if the hazard flashers work then i would say the signal flasher is bad.with the hazards on you can locate it and that is what the signal flasher looks like and it is a separate flasher,

Mar 31, 2011 | 2000 Nissan Frontier

2 Answers

LEFT TURN LIGHTS WILL NOT WORK ON 1993 TROOPER


believe it or not, a 4 way flasher can cause this even if it itself is working properly, otherwise flasher, bulbs, or switch is bad .

Oct 06, 2009 | 1993 Isuzu Trooper

2 Answers

Turn signals dont work 97 Geo Metro


we found the flasher curcuit had no power to the hot prong. So my friend wired the flashers hot prong into the radios fuse curcuit to get power to it and put a separate 10amp fuse on the new lead.

Jan 22, 2009 | 1991 Geo Metro

3 Answers

Flasher or turn signal switch


When you select left or right do any of the bulbs come on? If you select left check front and back left side if one of the bulbs did not come on the flasher will not work. Change the bulb that is out. Same with the right. If the fuse for the turn signal is good (check fuse or replace do not use visual, some appear to be good but are not).
The emergency flasher is different from the turn signal flasher. Look at manual for location of turn signal flasher. If you manually lift and lower turn signal control you may hear a clicking under the dash to locate the flasher.

Jan 02, 2009 | 1995 Chevrolet Caprice Classic

Not finding what you are looking for?
1993 Buick Roadmaster Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...