Question about 1993 Ford Escort 4 Door

1 Answer

Xr3i wont start

I have split my engine to do the clutch once i had put it all back the way it was the car wont start

when i turn the key the only thing that kick's in is the full pump getting no movement from any other parts

plus when i put it in gear the car wont move to jump it
if you can help please contact me on 07923016720

or zander01@ntlworld.com

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 177 Answers

Sounds like you have the engine locked somehow. Try turning the engine by putting a wrench on the front engine pully. If you cant turn the engine you may have something wrong ... like the clutch plate the wrong way round. What happens when you push the clutch pedal down ... does it feal right ?
I hope this helps
Sam

Posted on May 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 buick lesabre problems


unhook battery 15 min hook back on lower driver window put key on ignition just bump the engine and wait until security lit stop flashing turn key off do it again 3 times once lit goes off crank engine an should start if lit wont go away or flash while cranking you have a security issue at switch or bcm now need a scanner capable to look at the security data

Dec 22, 2013 | Cars & Trucks

1 Answer

Just had clutch replaced on 2003 hyundi tiburon 2.0 now car wont start it turns over sounds like it wants to start but wont and it started fine b fot clutch was replaced comp said to change crankshaft...


If the problem is related to the clutch replacement, there is most likely an electrical connector that did not get plugged back in or a ground connector that did not get put back where it came from. I would also suspect wires getting pinched between the transmission bell housing and the engine block.

The best thing to do would be to scan the engine control module for fault codes. This could lead you to the problem which may, or may not, have anything to do with the clutch replacement.

Apr 14, 2012 | 2003 Hyundai Tiburon

2 Answers

Push on clutch and caR WONT GO IN GEAR UNLESS MOTOR OFF


Some of that model had an unusual clutch mechanism, which has probably broken due to wear. Read here

http://wiki.answers.com/Q/How_to_adjust_clutch_on_1995_ford_escort

In the event yours is instead fitted with a hydraulic clutch, either

- the hose has split
- the clutch throwout lever has broken or collapsed

Mar 21, 2012 | 1995 Ford Escort

1 Answer

My non turbo 91 gto wont start. my immobiliser light flashes 10 times once i have try 2 start then goes blank. but when i pull the key out it goes back to its normal flashes. i beleave its a market...


The 1991 mitsubishi did not have fancy anti theft just a starter imbolizercheck the battery make sure it can crank and the light can you light turn on and does the horn work? If you want to defeat it you will need a toothpick this is only if it is the starter relay at fault take the key out of the ignition put in neutral someone in the car to step on the brake just in case you do this in gear and it runs you over. Find the starter relay it in thhe engine fuse box location take the cover off the relay and expose the switch put it back in its socket collapse the relay and it should crank the starter now if this is a stick have the helper step on the clutch it should crank, now have them put the key on collapse the starter relay key on stpe on the slutch the car should start warm it up and turn it off get that tooth pick make the relay collapse start the car

Aug 21, 2011 | 1991 Mitsubishi 3000GT

1 Answer

When i turn the key the engine wont turn over but i have power to everything but the motor


is the car a manual transmission or an automatic? if manual there is a switch on the clutch pedal that wont let engine turn over unless clutch is pushed to floor.automatic it is mounted on transmission at the linkage.for auto trans you can move shifter back an forth while trying to crank engine. if manual you can push clutch pedal to floor hard an try to crank.

Mar 21, 2011 | 1988 Ford Mustang

1 Answer

Engine cuts off while driving


Sounds like a bad MAIN relay, that controls fuel, It may also be a bad distributor, contact for more help. Thanks for using FIX Ya

Apr 03, 2010 | 1993 Honda Accord

1 Answer

2004 vw Passat TDI 130bhp not starting after >8hrs


simplest answer first,and this does not apply to a hot engine,The engine heaters work from a time switch on the door(would you believe)and the routine is, open door,climb in,put on belt,put key in ignition and turn on when orange light goes out.this allows the cold start heaters time to work(about 20 secs).sounds a pain but the number of times this has been all it is,when you put key in ignition, the fuel pump charges the system.hence the squirt noise,also the car has to reccognise the key(immobiliser system)also try using wynns/redexe to clean injectors...

Mar 11, 2010 | 2004 Volkswagen Passat

1 Answer

98 nissan terrano, just fitted new clutch kit, and fully bled clutch. when engine is started wont go into gear. if engines off you can put it in and start it up. when you release the clutch it bites half...


are you sure u bled the clutch properly ? cant be any air in the line ! check fluid level in master cylinder and pull guts out of slave cylinder 2 make sure there are no leaks ( splits in the rubber ) other than that ur clutch fork may not be on the thrust bearing correctly !!!

Aug 26, 2009 | 1998 Nissan Pathfinder

3 Answers

Nissan sentra 1997 starts but wont go when put in gear


is it a manual or automatic?if it's manual check clutch.if it is automatic check transmission fluid.

Dec 02, 2008 | 1997 Nissan Sentra

Not finding what you are looking for?
1993 Ford Escort 4 Door Logo

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5575 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...