Question about 2000 Mazda Millenia

1 Answer

Need to know how to reset the abs warning light, repairs have been made

Had a bunch of work done to a 2000 mazda millenia, brakes, suspension, axles, etc. need to know how to reset the abs warning light.

Posted by on

  • stevenbbarto May 11, 2010

    there is no reset unless the problem that caused the light has been fixed. what are the codes for the light?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 150 Answers

The ABS light will stay on only when a problem exists. Once repairs have been completed and no problems exist the ABS light will go off on it's own. Take the car back to where you had the work done and have them fix it. It shouldn't cost you anything. If the ABS light was not "on" when you took the car to them, DO NOT let them charge you to fix it. They caused the problem. They can fix it. Good luck. Hope this is helpful.

Posted on May 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 mazda millenia v6 emergency parking light


My guess would be a faulty abs module. you could have your vehicle scaned to extract codes that may diagnose it for you.

Jun 24, 2012 | 2002 Mazda Millenia

2 Answers

Axle broke car dropped 1996 Mazda can it be repaired


it can be repaired. you will need to make sure you did not bend or crack the shock. usually it will bend so it will also need to be replaced. make sure everything else is good and take both ends of the drIve shaft out of the wheel and the transmIssIon. and replace It. when you Install the new one you wIl need to make It lock Into place or It wIll grInd the gears on the new one.

Feb 23, 2012 | 1996 Mazda Millenia

1 Answer

Had new brakes done and was told had rear axle seal leak had it fixed but noww abs light and service elec brake system warning lights on does something need to be reset or is there other problems with my...


Hello -- hmm,. sounds like you may have a couple things going on here...
When the rear axle seal was replaced, there could have been a wire disconnected, frayed, broken, etc.,. to the electric brake system, this would cause the abs light to light.

Alternatively, or perhaps in addition, you could either need some brake fluid into the brake fluid reservoir, a brake line may have been damaged during the repair, either pinched or a leak, especially if it was weak with existing rust, etc.

In review of your original post: I see that you had the brake job done... ok, so if the work was done at a garage, I'd return it to the person who did the work (and **nicely* mention you are not interested in re-paying for the work to be re-performed). If you did the work, you may want to remove the rear wheels and re-inspect all parts just to be sure.
Best regards,
Ck

Oct 03, 2011 | 2005 Jeep Grand Cherokee

1 Answer

Millenia 2002 tcs light comes on while driving down the highway.


No different than any other malfunction indicator light,
we all have had on our dash for the last 30 years

Check for codes
Diagnose system with issues
Resolve/Repair

If you have an owners manual you will see an
explaination about traction control etc,part of ABS
Braking system

Sep 21, 2011 | 2000 Mazda Millenia

1 Answer

How do i fix my 1996 mazda millenia traction control


IF YOU SEE TRACTION CONTROL LIGHT YOU NEED TO LET A GARAGE OR DEALERSHIP CODE SCAN ABS BRAKE SYSTEM AND TRACTION CONTROL SYSTEM TO SEE WHAT CAUSING TRACTION CONTROL LIGHT FLASH COULD BE BAD WHEEL SPEED SENSOR BUT GET VECHICLE CODE SCAN.

Jul 07, 2011 | 1996 Mazda Millenia

1 Answer

I changed my axel on 98 Mazda millenia and my abs light came on How do I fix that


Make sure that the axle you put in has a trigger wheel and that it's not damaged. Also make sure you didn't damage the sensor there and that it's clean. Generally they are non adjustable but if yours is, make sure the clearance between the trigger wheel and the sensor is correct (don't have spec for you but generally they will work when set within an eighth inch of the wheel...check opposite side if you need to) If that fails to work, have the abs system scanned and see what comes up as a fault.

Feb 13, 2011 | 1998 Mazda Millenia

2 Answers

Mazda 626 2000 - warning lights for ABS, TCS


what u do to stop the vehicle and remove the battery head and refix,if the problem still persits go for thorough scanning.

Mar 25, 2010 | 2002 Mazda 626

1 Answer

The ABS light is on in my 2000 nissan maxima. I can't seem find my owner's manual so I don't know what it means or serious this is. Is this a repair that needs to be done immediately? Is the brake system...


The ABS system is INOPERATIVE as long as the warning light remains on. Recommend to have an ABS system diagnosis at local repair shop. Recommend to have repairs done asap as this is a safety issue. The brakes will function but the antilock feature will not.

Mar 31, 2009 | 2000 Nissan Maxima

1 Answer

Transmission Axles 2005 Mazda 3


mcdevito75, I have heard of 2 different type axles being used on Mazdas, the important thing though is the fluid leak. Have your local repair shop take a look and fix this leak.

Mar 28, 2009 | 2005 Mazda 3

Not finding what you are looking for?
2000 Mazda Millenia Logo

1,733 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8759 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...