Question about 2004 Dodge Ram 1500

1 Answer

Driver side low headlight beam doesn't recieve power

Driver side low beam doesn't recieve power

Posted by on

  • 2 more comments 
  • hardwoodcupc May 13, 2009

    first thing: I didn't see a fuse labeled headlight, Second: only the drivers side low beam doesn't function, bright beam works fine. Does the pcm have anything to do with the headlight power ?

  • Anonymous Mar 24, 2014

    Driver side low beam not working

  • Anonymous Mar 25, 2014

    headlight only work, when on highbeam

  • Anonymous Mar 31, 2014

    would like to find out what steps i can take to solve this problem.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 710 Answers

UNDER THE HOOD ON THE DRIVERS' SIDE YOU WILL SEE THE FUSE BOX. LOOK FOR THE FUSE DIAGRAM UNDER THE FUSEBOX COVER, TO LOCATE THE FUSE FOR THE HEADLIGHTS. SHOULD BE A 10 AMP FUSE. CHANGE IT WILL A GOOD ONE, AND LET IT SHINE. HOPE THIS HELPS. KEEP ME POSTED. THANK YOU FOR AN HONEST RATING AND FOR USING FIX-YA. GOOD LUCK

Posted on May 13, 2009

  • Mark L. Roberts Jr.
    Mark L. Roberts Jr. May 13, 2009

    PCM HAS NOTHING TO DO WITH THE LOW-BEAM, SORRY. LET'S HOPE THE PCM IS LIMITED TO WHAT IT CAN CONTROL. IF THERE IS NO FUSE FOR THE LOW-BEAM SIDE OF THE BULB, THEN REPLACE THE BULB TO RESTORE LOW-BEAM OPERATION. THANKS FOR THE RATING AND FOR USING FIX-YA. WE APPRECIATE YOUR BUSINESS.GOOD LUCK

  • Mark L. Roberts Jr.
    Mark L. Roberts Jr. May 15, 2009

    VERY CURIOUS TO KNOW IF THE BULB ITSELF WAS AT FAULT. KEEP ME POSTED PLEASE. THANKS FOR USING FIX-YA, AND FOR THE HONEST RATING. GOOD LUCK

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Driver side headlight goes dim on high beam while passenger side is bright


bad connection or bad earth check all connection or bulb

Jan 24, 2016 | Cars & Trucks

1 Answer

Driver side low and high beam on but dim. Passenger side low beam normal but high beam on and dim


I would check for the groundwire continuity

Driver side - dim low beams and no hi beam - Subaru Outback ...

www.subaruoutback.org > ... > General > Electrical & Electronics
Oct 11, 2014 - Hi everyone, My drivers side headlights are dim on low, (car has separate bulbs ... When the headlight switch is turned ON, but for low beams, ...

Driver-side Low beam Not Working (electrical issue not bulb ...

www.hummer4x4offroad.com/.../showthread.php?...Driver-side-Low-be...

Mar 12, 2015 - 10 posts - ‎4 authors
The high beam continues to work on both sides...I pulled the Driverside headlamp fuse and then both left and right beams lit up but very dim.

High beams ok, but not low beam - one side only - TDIClub Forums

forums.tdiclub.com > ... > VW MKIV-A4 TDIs (VE and PD)
Jan 23, 2014 - My driver's side lights are working fine - high and low beams. ... But it definitely looks like the big lamp on the driver's side gets brighter when ..... Drivers side headlight is very dim on low beam and goes out when on high beam ...

Dim driver's side headlight (low & high beam) - GrandAmGT.com Forum

www.grandamgt.com > ... > Technical Q&A

Dec 11, 2002 - 6 posts - ‎4 authors

Jan 04, 2016 | Cars & Trucks

2 Answers

Head light have low but when using high does not work just on one side drivers side


HELP! headlight not working even after change - Nissan Forums ...

www.nissanclub.com/...nissan.../302674-help-headlight-not-working-eve...

Apr 1, 2010 - 13 posts - ‎6 authors
My passenger side low beam headlight recently went off on me. ... I've changed the bulb again, and changed the fuse just in case, but .... My driver side headlight wire got loose so when i hit a bump at night if would flicker. ... When you notice one side not working (Low or High beam) it could be the module. Headlight replacement
15 posts
Jan 22, 2009
Low beams don't work but High's do
8 posts
Mar 20, 2005
More results from www.nissanclub.com

Dec 20, 2015 | 2004 Nissan Sentra

1 Answer

Why does driver side headlight only work on low beam?


I mite be able to tell you if I knew what year , make an model vehicle it is .

Oct 23, 2015 | Cars & Trucks

1 Answer

Drivers side low beam headlight went out, replaced the bulb but only works on high beam, any suggestions


using a test light check for powers and ground at the headlight socket. you say the high beam works so that pretty much says the ground is good. if the low beam terminal has no power you will have to see if your car has a fuse for each headlight, as you don`t say the year make and model you have. if you have power then check the socket for corrosion or a loose connection.

Apr 19, 2015 | Cars & Trucks

3 Answers

I have a 2007 Chrysler sebring and drivers low beams will not work.


try the fuses or wire fuse links , the only other thing in the circuit is the wires broken or the light low switch is bad

Nov 08, 2014 | 2007 Chrysler Sebring Sedan

1 Answer

My 2004 eclipse low beam headlights doesn't work


More than likley just a defective headlight bulb.

Feb 07, 2012 | 2004 Mitsubishi Eclipse

1 Answer

Low Beam Drivers Side doesn't work ... low voltage,


Power for the headlights on the Left side (High and low beam.) comes from the same fuse... The ORANGE wire and the ORANGE/BLACK are the same, they connect in the harness. If you only lack the 12v to make the light work connect them at the headlight assembly.

If your low beam also lacks ground the Left low beam ground is shared with the right low beam ground... Run a wire from left low beam DARK BLUE to right low beam DARK BLUE/WHITE.

If its not working now then your cursed, seek a witch doctor.

May 23, 2010 | 2004 Buick Regal

1 Answer

My passenger side low beam headlight is out. the driver side low beam headlight works fine. I replaced the bulb and the headlight still doesn't work. What should I look at next?


Check the fuse. There are seperate fuses for right and left. You dont mention if the high beam works for that side? If it does, the fuse is good. The GREEN wire at the bulb is the ground for the low beam. If that wire has power, then the ground is bad. If the high beam works, the hi'lo beam switch is good, and there is a problem between that headlight and the Engine Compartment Junction Block

Dec 16, 2009 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
Cars & Trucks Logo

374 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...