Question about 1998 Plymouth Voyager

1 Answer

CYLINDER 6 MISFIRING ON A 1998 VOYAGER - 1998 Plymouth Voyager

Posted by on

  • Mr BrokRench
    Mr BrokRench May 11, 2010

    Did you retrive a P0306 code?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 272 Answers

Your cylinder only has a few problems that can cause this. 1. you need a spark. Take a spark plug wire that you know is good out of another car and try it on your plug 6 it might just be a bad wire. If there is no difference pull the plug with the wire attached and see if you have a spark by grounding the side of the plug and seeing if a spark jumps the gap between the center electrode on your plug 6 and the little arm. If not try another plug on 6 to see if your not getting spark. If your not getting spark on 6 but you are on the others then your coil is fine it is either yout distributer cap, rotor or sensor in the distributer. If you have spark then it is a fuel issue. 1998 should have EFI check the connections to the fuel injector and fuel rail. If they look good pull the injector and have it cleaned. Much cheaper than having it replaced. Lots of 'injector doctor' shops you can overnight mail to. Other than that it would be an airflow/intake manifold/exhaust/camshaft/valve issue and that's going to be a lot more involved

Posted on May 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

#1 cylinder is misfiring, put new fuel ejector and the problem is still there.It has a bad noise in the motor.


Thread: Cylinder 1 misfire P0301 - The Chrysler Minivan Fan Club ...

forum.chryslerminivan.net/showthread.../27978-Cylinder-1-misfire-P03...

Feb 6, 2013 - 7 posts - ‎4 authors
My mother-in-law's 2002 Town and Country has the P0301 cylinder 1 misfire error code. I haven't done much work on this type of car, so I'm not ... '05 Town & Country Cylinder 1 misfire mystery
10 posts
Feb 3, 2014
Engine misfire
7 posts
May 6, 2012
#1 Cylinder misfires at idle only
10 posts
Jun 4, 2011
Running rich / Misfire Mystery
10 posts
Sep 20, 2010
More results from forum.chryslerminivan.net

Part 1 -How to Test the Coil Pack (2001-2008 Chrysler 3.3L ...

easyautodiagnostics.com > Chrysler > 3.3L, 3.8L
Apr 29, 2011 - Page 1 of 7: How to Test the Coil Pack (2001-2008 Chrysler 3.3L, 3.8L). ... This article will help you troubleshoot a Misfire Condition that might be setting ...your 2001-2009 Chrysler (or Dodge) 3.3L or 3.8L Town and Country, Voyager, ... it's important the you know what 'Paired Cylinders' and 'Non-Paired ...

Jan 03, 2016 | 2001 Chrysler Town & Country

1 Answer

1998 Chevrolet c15 5.7 misfiring


check your wires they may be frail. also check your spark plugs they may not be gaped right.

Mar 09, 2013 | 1998 Chevrolet C1500

1 Answer

The car is misfiring


you need to determine what cylinder is misfiring first then do compression and leakdown test if the parts you put in are in correct misfiring cylinder you possably have a bad valve or burnt piston

Aug 28, 2012 | 1998 Pontiac Grand Am

1 Answer

Check engine flashing


this usually indicates a cylinder misfire. Two things you can do.

1. remove the coils or wires one at a time until you find the cylinder that is not working. Than inspect the components on the cylinder (plug, wire, coil, etc)

2. scan the computer for codes. You should get a P030X (the X will be a number 1-6 depending on what engine you have). whatever number is shown is the cylinder that is misfiring. for example P0304 would be a number four cylinder misfire, P0302 would be a number two cylinder misfire.

Dec 05, 2011 | 1998 Honda Accord

1 Answer

Random misfire/rough idle/stall


Low fuel pressure due to faulty fuel pump will give misfire codes due to fuel starving conditions. Have fuel pressure tested, preferably when running bad.

Jun 20, 2009 | 1998 Plymouth Voyager

1 Answer

76 P0306 Misfire Cyl. 6 Or Random Misfire


hi my name is mark, to reset that all you do is pull positve cable off battery and that will reset the ecm. you might check your plug wires for loose connections.

Mar 16, 2009 | 1998 Honda Civic

1 Answer

Gas mileage


I have a 1998 Plymouth Grand Voyager 6 cylinder (3.3 engine), I get 22mpg highway and about 18mpg around town. countrycurt0

Sep 15, 2008 | 1999 Plymouth Grand Voyager

Not finding what you are looking for?
1998 Plymouth Voyager Logo

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...