Question about 1998 Chevrolet S-10 Pickup

1 Answer

Problem start my truck

I change the ignition the coil,i clean the coil ,modular from the ignition crank seansor ,ignition core and the truck does no want to start

Posted by on

  • 1 more comment 
  • wsagardia May 13, 2009

    i crank the engine and it give electric to the coil and i do not have electric to the spark plug can so one help me please thank you

  • carhob May 11, 2010

    do u have spark from coil to cap ?

  • its420_us May 11, 2010

    did you check your fuel pressure?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 2,007 Answers

Then i guess you should start by changing the coil.

Posted on May 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

NO FIRE TO THE SPARK PLUGS, I CHANGED THE MODULAR,COILS ,PLUG WIRES ,PLUGS , 1997 CHEVY LUMINA 3.1 WHAT NEXT ?


Check for the presence of voltage to the coils and the ignition control module. The ignition switch may not be supplying power in the crank position.

Jun 20, 2015 | Cars & Trucks

2 Answers

How to change ignition control modular


there are three types you need to know what one it is, one type is on the dispack and the other 2 fit to the distributor one type has 3 connectors and other type has 1 connector, dispack best just to change the whole unit as the pins can brake if you remove the modular of it.

Jan 03, 2015 | 1994 Chevrolet C1500

1 Answer

I have a 1992 Grand Am with a 2.4 Liter that starts and runs just fine but after about a half hour it turns off just like you turned the switch off, After around a 1 hour of cool down time, it starts...


Check both the crank position sensor and the camshaft position sensor! Heat will affect them as well, causing it to shut down! if the computer isn't getting a signal it can't operate the ignition! Also check map and/or maf sensors

Aug 28, 2013 | Cars & Trucks

1 Answer

My 97 s10 dies and just cranks no start. then later it will start


could be ignition modular,,or coil,,is there any ck engine lights on ??

Apr 18, 2010 | 1997 Chevrolet S-10 Pickup

1 Answer

No spark on a 1996 vw jetta


With a volt meter,check for positive 12V on the coil.

post to body metal ground when the KEY is at on position.

===

Check alarm for ignition and/or start cut off.

Bad relay on alarm cut off (Bosch type relay)


Dec 14, 2009 | 1998 Volkswagen Jetta

1 Answer

My car does not start. I changed the ignition


Check to see If you have power to ignition module,coil a good wiring schematic is needed to properly check you power supply to computer .factory repair manuals are availible on eBay about 10 bucks .computer is high failure item on these.

Nov 01, 2009 | 1993 Mitsubishi 3000GT

1 Answer

Car cut off will not crank replaced starter, modular,senor,dropped tank to check fuel pump (works fine) car still will not crank. help please


IF ALL PLUGS + WIRES + CAP AND ROTOR BEEN CHANGED. THE PROBLEM COULD BE IN THE IGNITION SYSTEM.LIKE THE IGNITION MODULE OR COIL.SCAN IT TO CHECK TO MAKE SURE PCM IS OPERATING.MAKE SURE FUEL PRESSURE IS 40 - 47 PSI.

Sep 06, 2009 | Oldsmobile Delta 88 Cars & Trucks

1 Answer

Have 1999 chevy cavalier and will not start no spark new ing modular crank sensor cam sensor and still will not start


i have a 2002 cavalier that had cam crank ignition control mod and coil packs replaced still didnt start so i started in the steering column it turned out to be the acc switch harness one zip tie around switch and harness problem solved

Feb 20, 2009 | 1999 Chevrolet Cavalier

1 Answer

I have a 1995 Saab 900 SE V-6 2.5 Auto with no spark to the plugs


Did you check the oil. It has a low oil shut down feature. Below 1 quart low, ignition is disabled.

May 20, 2017 | 1995 Saab 900

1 Answer

900 SE 1995 2.5 V-6 with no spark.


Start with some more basic checks? plugs, ignition wires, ignition sensors (spray em with contact cleaner) also a little more information on Exactly whats happening would be nice, for all we know its your battery, (i.e sounds, sound are important) heck shoot up the starter with a can of starter fluid....or take it to a dealership, ( I do'nt personaly work on Saabs ) they sometimes will tell you a few basic things to try and will get right to it

Jan 24, 2009 | 1995 Saab 900

Not finding what you are looking for?
1998 Chevrolet S-10 Pickup Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...