Question about 1992 Toyota Previa

1 Answer

Change oil light will not turn off...oil has been changed

My change oil light will not turn off and we have changed the oil in it...please help

Posted by on

  • 1 more comment 
  • servntime May 12, 2009

    they didn't know how

  • servntime May 12, 2009

    thanks i went on wikipedia and found it

  • yadayada
    yadayada May 11, 2010

    whomever changed the oil should have reset it for u.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 75,117 Answers

This is from the service manual.

There is a small rubber plug in the clear face of the guages. remove it. through the hole you'll see a little button. turn the key on, take a pencil and slide it through the hole, and press the button in until the light goes out.

Posted on May 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why would my service engine soon light be on


  • Hi, I can help.
  • The service Engine Light Soon light means it's time for an oil change,

  • You can turn this light off real quick by following these steps.
  1. Turn the key to ACC.
  2. Press the gas pedal down all the was three times in fairly rapid succession.
  3. The service engine soon light will begin to blink and then disappear.
  4. Turn the key to off.
  5. now start your truck.
  6. The light will now be off.
  • This should be done after every oil change.
  • All the light means is that the PCM has indicated that you have driven the required miles for an oil change. A reminder light if you will.

  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.

Regards, Tony

Aug 27, 2011 | 1999 Chevrolet Silverado 1500

1 Answer

How do you set old light


Hello brucecaswell: My name is Roger and I will help you. I assume you arwe trying to reset the oil change reminder lamp? To do this follow the steps listed.
(1). With the key on but engine off,fully depress and release the accelerator pedal slowly tree times within 5 seconds.If the oil change light flashes the system is resetting.
(2). Turn the key off after the lamp has quit flashing, then start the engine. If the OIL CHANGE light comes back on, The oil life system did not reset. Repeat the procidure to reset the lamp.
Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger

Aug 23, 2011 | 2001 Oldsmobile Intrigue

2 Answers

How do i reset the oil change light in a 2003 olds alero


turn key on (dont start engine) floor gas pedal 3 times 1,2,3. turn key off, now start engine it should go off, if not try it again.

Aug 03, 2011 | 2003 Oldsmobile Alero

1 Answer

Need reset code for change oil light


Hello thegoat1969: My name is Roger and I will help you. To reset the oil reminder you will need to perform the following. 1. Turn the key on engine off. 2. Press the accelerator pedal fully tree times within 5 seconds. If the CHANGE OIL SOON light flashes two times,system is resetting. 3. Turn key off,start the vehicle.If CHANGE OIL SOON light comes back on,the system did not reset,repeat the procedure. After the restart wait 10 or 15 seconds to give the lamp time to reset and go off. Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger

Feb 16, 2011 | 2000 Chevrolet Impala

1 Answer

I have changed the oil &filter,and the light on dash is still on telling me change oil,and motor requiers service soon. rev.counter does not work, can you help please. email s.stephen@clear.net.nz


Resetting Engine oil Life Monitor
1, turn key to on, but do not start.
2. Press ENG MET button on the Trip Monitor within five seconds.
3. Within five seconds of step 2, press and hold RANGE button on the Trip Monitor. The CHANGE OIL light will flash.
4.Hold the RANGE button until the CHANGE OIL light stops flashung and goes out. This should take about 10 seconds.

If it doesn't reset turn key off and repeat the procedure. Careful to observe the "within 5 seconds"

necss03

Nov 23, 2010 | 1991 Chevrolet Corvette

1 Answer

How to turn change oil light


iI you mean 'how to turn change oil light off" go to fuse panel. Open drivers door there is a panel cover on the side of dash board, remove cover there is a red RESET button that resets oil pressure and tire pressure. Turn the ignition key to the on position but don't start the car. Now press and release the reset button the change oil light should start to flash, now press and hold the reset button until you hear chimming hold until chimming stops then release, the change oil light should go off. If you need to reset tire pressure press reset button twice, the first push will make the change oil light flash the second press will make the tire pressure light flash then hold untill chimming stops, light should go out . Hope this helps.

Sep 30, 2010 | 2000 Pontiac Grand Am GT

1 Answer

Reset oil light in 2004 alero


Oil lights can not be reset,but the oil change light can,,Turn the key to on,and push the accelerator 3 times slow ,with in 5 seconds,this will turn the oil change light off.If this was helpful,please rate thank you.

Jul 21, 2010 | 2004 Oldsmobile Alero

3 Answers

Reset change engine oil light


Information taken from: http://www.idavette.net/tech/oilreset.htm

[quote]
The "Change Oil" indicator is reset by using a sequence of Driver Information Center (DIC) key presses as follows:

1. Turn ignition "ON", but do not start engine. (ALDL pin "G" should NOT be grounded.)
2. Press the "ENG/MET" button and release, then, within 5 seconds, press it again.
3. Within 5 seconds of Step 2, press and hold the "GAUGES" button. While the button is held, the "Change Oil" indicator will flash.
4. Continue holding the "GAUGES" button until the "Change Oil" indicator stops flashing and goes out, indicating successful completion of the reset cycle. This should take about 10 seconds.
If it does not successfully reset, turn ignition "OFF" and repeat the procedure from Step 1.
[/quote]

Nov 16, 2009 | 1991 Chevrolet Corvette

1 Answer

Change oil light stays on after oil change


Did you also change the filter as well as the oil, and have the system flushed?

If not, do so.

Apr 17, 2009 | 2006 Chevrolet HHR

3 Answers

Need to know how to reset the change oil light on my 2002 aztec


If you have the Driver information Center then you just select engine life cycle and hold down set button, otherwise You turn the igniton on, pump the pedal 3 times within 5 seconds, the change oil light should start flashing indicating it has been reset.

Nov 17, 2008 | 2002 Pontiac Aztek

Not finding what you are looking for?
1992 Toyota Previa Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...