Question about 2004 Buick Rendezvous

1 Answer

Oil light will not go out. I have turned on ignition without starting car pushed pedal to floor three times turned ignition off all within five seconds. Then tried it pushing pedal six times. Light is still on.It used to go out. Speedometer quit working then the light at the odometer and gear display quit working, now the gas gauge is acting goofy.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Wiring problem it sounds like. check your floor console fuse block, fuse 41. if that is not the problem, go to gm mechanic

Posted on Feb 07, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

7 Answers

How do I rest oil change light on a 2001 1500 silveradeo?

Place a piece of black electrical tape over it ,problem solved .you know the oil is good

Oct 10, 2014 | 2001 Chevrolet Silverado 1500

2 Answers

Reset change oil light on 2004 bruick revendevo

hi there
to reset this turn your ignition on without starting and press accelarator all the way down three time within five seconds the oil light will flash twice and you will have reset it have a wonderful day and thank you

Aug 22, 2011 | Buick Rendezvous Cars & Trucks

3 Answers

Reset check engine light after oil change

Turn the key to the on position. Not the start. And press the gas pedal all the way to the floor 3 times.

Feb 15, 2011 | Chevrolet Avalanche Cars & Trucks

1 Answer

I do auto car wiring i have tried to reset a E36 series 320i oil service indicator but failed

I'm not sure about the BMW, But most cars I've done is to turn on the ignition, push the gas pedal slowly down to the floor three times within five seconds. And this will reset the oil light. Good luck

Feb 02, 2011 | BMW 3 Series Cars & Trucks

1 Answer

How do I reset oil change light

For a 2005 trailblazer to reset the oil change light you will need to make sure all doors are closed then turn key on and slowly push gas pedal to floor three times within five seconds, this must be done within 5 sec, from the time you turn key on, the key must be on so all dash light are on its right before the engine start postion, after you push gas pedal to floor three times the light will flash a few times then go out. the system is now reset, if it doesnt reset then repeat steps starting with turning the ignition on, take note engine must be off, not running, have a nice day and i hope this is helpful.

Nov 28, 2010 | 2005 Chevrolet Trailblazer Ext

2 Answers

How reset oil light 2009 pontiac wave g3

Turn on the ignition with engine off.
Fully press and release the accelerator pedal 3 times within 5 seconds
Turn off the ignition

It is in sections 3 and 5 of the owners manual if you ever need to refresh this next time.

Nov 08, 2010 | 2009 Pontiac G3

1 Answer

Set back oil change light

turn the ignition on without starting the vehicle, and pump the gas pedal to the floor three times within five seconds, the oil light should flash for a bit and turn off, sometimes you have to do it a few times for it to work

Oct 28, 2010 | 2002 Pontiac Montana

2 Answers

How do I reset the change oil soon message in my 1998 Chevy Lumina after changing the oil?

This is done by turning the key on engine off and fully pressing the gas pedal to the floor sloowly three times within 5 seconds, the light will blink and go off then turn the key off for 3 sec and start engine, light should be off if not repeat steps. hope this helps.

Oct 27, 2010 | 1999 Chevrolet Lumina

1 Answer

Oil change light is on how can i turn it off

  1. Turn the ignition key to ON (with engine OFF).
  2. Push the accelerator pedal fully to the floor and release three times within five seconds.
    • The CHANGE ENGINE OIL light should flash.
  1. Turn the ignition OFF, then start the vehicle.
    • If the CHANGE ENGINE OIL message comes back on, the monitor has not reset. Repeat the procedure.

Apr 05, 2010 | 2000 Pontiac Montana

4 Answers

Oil light stays on

You need to put the key on and push the gas pedal to the floor three times within five second to reset the oil life light.Some g.m.'s have a reset buttom in the fuse panel that needs to be pushed first and some don't.Check the owners manual under change oil for your specific year car.

Oct 21, 2009 | 2003 Chevrolet Impala

Not finding what you are looking for?
2004 Buick Rendezvous Logo

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts


Level 3 Expert

79077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides