Question about 2003 Ford Explorer

1 Answer

The door ajar light has been on for a week, all doors are secure, how do I correct this myself. Moosebunny

The door ajar light has been on for a week, all doors are secure, how do I correct this myself. Moosebunny

Posted by on

  • glamourgrl05 May 19, 2009

    I have the same problem. It seems to do that when the weather is damp or when it rains alot. It will go out when it dry and warm. But I was told that we have a bad sensor in the passenger door.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 500 Answers

Alot of work... take all 4 door panels off, on each door latch there is a connector attached to a switch. with all doors shut, start unhooking the switches. the one that turns the light out is the bad switch- you can either replace the switch or just leave the connector un plugged.

Posted on May 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2003 navigator interior Lights and driving lights won't turn off. Door ajar warning on


Is your 'door ajar' or 'dome light' staying on? Forum members suggest various methods that they fixed their issue. The methods include:
  • Adjusting the dimmer
  • Spraying the switch with a lubricant
  • Replacing the switch
  • Replacing the relay

Sep 28, 2016 | Cars & Trucks

2 Answers

What can I do to get door ajar light to go off on a2005 4 door vibe


The door ajar sensing switch is incorporated into the door lock assembly inside the door. Which door is causing the problem will be the question. In most cases it will be the drivers door as it is used most frequently. I have had some success spraying WD-40 into the lock assembly of the door and opening/closing it several times. This has worked on some makes and models. Others have needed switch replacements. Try the WD-40 spraying liberally on all lock assemblies and hope for the best

Jan 12, 2016 | Cars & Trucks

2 Answers

Hi I have a 2006 Lincoln navigator the air suspension pump will not turn on the vehicle dynamics module is not turning on the pump relay because in the pid data the drivers door says it is ajar when it is...


Hey Jeff, any U- codes stored in any modules ?
U1900 Missing CAN message(s) Door(s) ajar, PRNDL, 4x4, instrument cluster (IC), running boards, vehicle speed REFER to Section 418-00 . U2023 Invalid CAN message(s) Door(s) ajar, PRNDL, 4x4, instrument cluster (IC), running boards, vehicle speed REFER to Section 418-00 .
L4 CHECK THE VDM FOR DOOR AJAR INPUT
  • Key in ON position.
  • Monitor VDM door position status PID.
  • Close all doors, liftgate, liftgate glass and power running boards.
  • While observing the diagnostic tool, open and close one door.
  • Does the door status PID change between CLOSED and AJAR states?
When you open an close the driver door you have no PID change ,right ?
L4 CHECK THE VDM FOR DOOR AJAR INPUT
  • Key in ON position.
  • Monitor VDM door position status PID.
  • Close all doors, liftgate, liftgate glass and power running boards.
  • While observing the diagnostic tool, open and close one door.
  • Does the door status PID change between CLOSED and AJAR states?
The door ajar input is an input to the Vehicle Security Module , then transmitted over the bus ! You'll have to find a diagram for the med. speed CAN data bus .

Jan 09, 2015 | 2006 Lincoln Navigator

1 Answer

Door ajar light


I found that when I opened the right rear door several times I could get the problem to clear. Once I got the problem to clear I tired to keep any one from using that door. Once they forgot and opened that door again I was back in trouble again! I finely replaced the switch in that door and problem was corrected. Wish you luck this can drive you crazy..

Dec 21, 2013 | 2000 Ford Excursion

1 Answer

Doorajar liht and beeper sounds


It can be issue with faulty sensor or a wiring issue.Troubleshooting is required.
Click the help link shown below:---
Door Ajar Light and Dome Light Remains ON? http://whoisbyme.blogspot.in/2012/06/2003-mercury-sable-door-ajar-light-and.html
------------
Door ajar light stays on? http://technoanswers.blogspot.com/2012/01/door-ajar-light-stays-on.html

--------
Thanks.

Jun 26, 2012 | 2002 Ford Explorer

2 Answers

2003 ford explorer door ajar light stays on. Is there a fuse that controls this?


your problem i think that is not a fuse the problem might be in the door ajar switch that its in the door latch some times you can correct the problem just spraying some lubricant to the latch and open and close the door for several times since you don't know exactly wish door is with the problem i suggest you to lubricate all the door latches and see in the door ajar light comes of if not you will need a technician that help you solve this problem

Jan 31, 2011 | Ford Explorer Cars & Trucks

1 Answer

Dome light stays on. Always says theres a door ajar.


The sensors are in the latch assembly. Try opening the doors and spraying the latches with WD-40 that will usually fix it.

Dec 18, 2009 | 1998 Ford Taurus

1 Answer

My passenger door has no power,my security light is on constantly


Have lost power to the passenger side door. Without power system doesnt recognize door closed because of no power to door ajar switch which keeps dome light on. Security light stays on because without power to rest of systems supplied by fuse it cannot tell if doors and windows closed to engage security features. Most common is for power wire to break somewhere near where it leaves to main body and enters the door.

Apr 25, 2009 | 2003 Pontiac Bonneville

Not finding what you are looking for?
2003 Ford Explorer Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...