Question about 1994 Nissan Quest

1 Answer

Dont know i bought a nissan quest on 5/9/09 and the van had been sitting for awhile, so i switched out the battery with my ford taurus. i started the van with no problem this morning and then went to the store, turned the van off to go inside i came out and tried to start it, the dashboard lights came on but the car wouldnt start. i had someone try to jump it for 2 min and it still wouldnt start. got any ideas?

Posted by on

  • Samuel Charles Spriggs May 11, 2010

    Have you cleaned and tightend all the relevant terminals & connectors: battery, solenoid/relay, etc.?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

Check the starter. Sounds like it is not getting any juice. Tap on it with a long metal pole or hammer while someone tries to start it.

Posted on May 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine smells like over heating


Maybe you could ask your friendly used car salesman if he has any information about this problem?

May 16, 2015 | 2000 Nissan Quest

1 Answer

Why does my 2000 Nissan Quest emits humming sound when engine run


Most likely, that is the sound of the FUEL PUMP. If the car is running well, don't worry about it. Try changing your fuel filter to see if that helps (usually does).
If you have trouble with fuel delivery at high speeds or under load, suspect that your fuel pump is about to fail.

May 16, 2015 | 2000 Nissan Quest

1 Answer

2001 ford taurus car starts fine drive it for awhile then shut it off and it wont start let it sit and it will start battery is fine


Does it crank?If you shut it off and you restart after a few minutes and it cranks but won't start or starts and runs rough the injectors are leaking and flooding the engine. Need better description

Dec 07, 2011 | 2001 Ford Taurus

1 Answer

Part of the driver side outside door handle for my 1999 Nissan Quest broke and it is still attached but will not allow me to open the driver door from the outside. Nissan no longer makes this part and I...


you need to remove door trim panel for access. Ford has one but you will have to paint it. buy a psray can of paint at an auto astore. paint code on your driver door opening sticker.
quest & villager are same van, built at same plant by Ford, Nissan powertrain.

Go to our site and read files. everything about villfewr quest. 3000 members. I was Ford manager of service issues on this van. I can get you part number and you can order from tascafordparts.com at discount. I also have shop manual & wiring book for sale $20. Let me know.

http://groups.yahoo.com/group/villagerquest/

Dec 13, 2010 | 1999 Nissan Quest

1 Answer

Ford taurus won't start when car been running for awhile


Could be your alternator not being able to spin enough current to start the car. Battery alone wont be enough to start the car. The alternator kicks in and helps. So check the alternator out. Take the alternator out and take it to autozone and they will check it for you for free.

Jun 01, 2009 | 2003 Ford Taurus

1 Answer

Nissan Quest Van 6 cylinder XL


I need a diagram of where the starter is in a 94 nissan quest van

Oct 17, 2008 | 2000 Nissan Quest

1 Answer

Programing a remote on a 99 quest


first make sure,that the batter is ok. You will need to have both remotes while doing this.
1: get in and lock the doors with the power door lock
2: insert the key into the ignitoin repeatedly IN and OUT 6 times in a row or just keep doing so, until the hazard flashers flash on the dash board (observe the dash board while inserting key)
3: after the hazadrs flash TURN key into the ACC position/not start.(dash will light up) DO NOT START
4: with the key in ACC position, hit lock button on the remote. That will program that remote.
5: to program the other remote simply unlock the door with the door lock switch and relock it with the swithc and hit the other remote button.
6: done

Sep 16, 2008 | 1999 Nissan Quest

Not finding what you are looking for?
1994 Nissan Quest Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...