Question about 2000 Plymouth Voyager

1 Answer

I need to know how to change to water pump on my 2000 plymoth voyager mini van

Posted by on

  • Samuel Charles Spriggs May 11, 2010

    Best way to get this procedure is to acquire a repair manual.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

Need to loosen bolts for the water pump pulley. Remove belt and then remove pulley. Should be 5 10mm bolts holding the pump on. Remove the bolts. Reinstall in reverse order. Refill with new coolant.

Posted on May 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need to know what the pipe is called that the lower rad hose hooks up to on the 1998 plymouth grand voyager mini van 3.0L, 3 speed automatic ?


if you follow the pipe does it go towards the transmission ? if so it's for the trans cooler. If not it will be the escape hose incase of overheating/to much pressure in the coolant system , if you go to a parts retailer like autozone they will have the part named on their data system , its a bit difficult without seeing vehicle to name parts . although you have given a good description, the lower rad hose carries cooled coolant so i would think it's the trans cooler but check at autozone or similar

Jul 07, 2014 | 1998 Plymouth Grand Voyager

1 Answer

Where do i find the front heater core in a 1990 plymoth voyager mini van


Hello faianburk,

The heater core is inside the plenum see image below. To get to the heater core you must remove the dashboard from the vehicle, this is a big job and not for the faint at heart.

netvan_197.png

I hope this helps.

Regards,

Jerry

Aug 22, 2011 | Plymouth Voyager Cars & Trucks

1 Answer

Oil pump location for 3.3 motor for 1999 plymoth voyager van


it is located inside the sump of the engine you need to remove the timing chain case and the sump to access it

Feb 07, 2011 | 1999 Plymouth Voyager

1 Answer

I have a plymouth voyager mini van, which is


If you changed the valve, then you would need to have the code cleared. How do you know fuel is shutting off and not electrical ?

Feb 02, 2010 | 1996 Plymouth Voyager

1 Answer

How to change waterpump on a 99 plymoth grand voyager 3.3 motor


i need your help about problem water pump. I did exchanged new water pump. but it keep increase hot up .. i still figure something out about water pump. do you think fan cooling broke either fuse blow out .. thank you ..

Jan 17, 2010 | 1998 Plymouth Grand Voyager

1 Answer

93 plymoth voyager mini van keeps stalling when climbing hills or high temps. i have picked up an oxygen sensor have not instaled yet wondering if anyone has encountered anything simulare?


Oxygen sensor won't help you have a bad fuel filter or fuel pump is not pumping under load which colud be casue by the maf sensor or the furel regulater is bad, to know which one it is you would have to rent a fuel pressure tester and see if the pump is within specks These problems are expensive so I won't tell you wich one it is except change the filter firs, could even be needing a tune up but you have not stated if it had been tuned up or not. Leave more information and I will try to help or someone will try.

Aug 31, 2009 | 1993 Plymouth Voyager

1 Answer

1997 Plymoth Voyager leaking water


sounds like the heater core is leaking inside the dash.

Apr 28, 2009 | 1997 Plymouth Voyager

1 Answer

1995 Plymoth Voyager


The water pump bolts directly to the engine block, using a gasket for pump-to-block sealing, The water pump is driven by the timing belt and is serviced as a unit.Disconnect battery ground cable.Remove crankshaft drive pulleys and torsional damper,and Right Engine Mount & Bracket.Place a jack under engine to support and slightly raise engine, then remove engine mount bracket.
Remove timing belt cover, then mark belt running direction for reinstallation.
Loosen timing belt tensioner, then remove belt and crankshaft sprocket flange shield.
Drain cooling system.
Remove water pump mounting bolts.
Separate water pump from water inlet pipe, then remove water pump.
Reverse procedure to install, noting the following:
Use a new O-ring on water inlet pipe.
Torque water pump mounting bolts to 27 Nm (20 ft. lbs.).

Dec 24, 2008 | 1995 Plymouth Voyager

1 Answer

94 Plymouth Voyager Water Pump


thw water pump stuff you need is here

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280215d73

The heater stuff is here

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280216054

Hope this helps! good luck!

Sep 15, 2008 | 1994 Plymouth Voyager

Not finding what you are looking for?
2000 Plymouth Voyager Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...